Ballycatter.ca - Industrial Equipment

Pumpjack C-320D-256-144 for application in the majority of oil wells

The Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit. These units are simple to operate and require minimum maintenance. Unit Size C-320D-256-144 A 120.00 B 180.00 C 260.00 E 215.25 F 353.75 H 398.00 I 32.75 J 110.00 L 72.50 M 76.00 N 21.13 N1 16.13 R 136.88 T 34.00 U 98.63 V 52.00 W 43.00 X 112.50 AA 53.625 AB 93.00 UU 31.00 VV 48.25 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, all brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. View Details

5 1/2” SCSSSVs for High-Pressure Well Control

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 5 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) serves a critical safety function by enabling rapid well shut-in if uncontrolled flow occurs due to equipment malfunction or damage. Positioned in the upper section of the wellbore, this valve acts as a barrier to isolate the production pathway, helping to prevent uncontrolled release of fluids and protect personnel, equipment, and the environment.

Its fail-safe design means that any loss of control pressure or system failure causes the valve to close automatically, ensuring well integrity even in emergency situations. The valve uses a wireline-retrievable flapper mechanism that is surface-controlled, allowing operators to maintain or replace key components without pulling the tubing string—significantly reducing downtime and operational costs.

Engineered for wells utilizing 5 1/2" (139.70 mm) tubing, this valve fits landing nipples with a 4.562” seal bore and supports working pressures up to 5,000 psi. The internal valve diameter of 2.38” is designed to balance flow efficiency and tool passage capability. Additionally, by positioning the sealing surfaces outside the flow path when open, the valve minimizes wear caused by erosive fluids, enhancing durability and service life.

This SCSSSV provides a reliable, maintainable solution for well control in demanding operational environments, combining robust construction with practical features to support continuous production and rapid emergency response.

View Details

Xanthum Gum (Liquid and Powder)

Introducing Xantham Gum from Cleanstream – the versatile solution for your drilling and completion needs. As a leader in providing innovative and environmentally responsible solutions for the oil and gas industry, Cleanstream is proud to offer this unique polymer for rheology modification, hole cleaning, and solids suspension. What sets Xantham Gum apart is its ability to provide excellent friction reduction – a feature that is unmatched by most other polymers in oilfield drilling and completion applications. Additionally, it can be used in most types of water-based fluids, making it an incredibly versatile product for your operations. Our in-house laboratory facilities allow us to determine the right approach to solve your specific problem. And at Cleanstream, we are committed to developing eco-friendly solutions for as many applications as possible. Whether you need Xantham Gum for a specific project or require our personnel and equipment for complete execution, we have you covered. Click on the datasheet for more information or contact us to learn how Xantham Gum can benefit your operations. Trust Cleanstream for innovative and sustainable solutions for your oil and gas needs. View Details

HDI 2200 Choke Position Indicator System

The HDI 2200 Choke Position Indicator System is a battery-powered, intrinsically safe solid-state electronic gauge designed to monitor choke valve positions in oil and gas operations with high accuracy. It displays choke position in 1% increments from fully closed to fully open (0% to 100%) using a three-digit numeric readout alongside an analog bar graph segmented into 101 divisions for both precise measurement and quick visual trend analysis.

The system interfaces with linear, rotary, or retractable potentiometers housed in stainless steel enclosures. This flexibility allows for straightforward adaptation across many choke configurations without the need for onsite customization. The sealed stainless steel housing and solid-state electronics enable the 2200 to operate reliably in harsh field conditions, including high vibration environments typical in land and offshore drilling.

Its compact display unit measures approximately 8 by 8 by 4 inches and weighs around 5 pounds. The system is powered by an intrinsically safe 3.6V DC battery pack, with a low battery indicator to ensure timely maintenance and uninterrupted operation. Field-repairable components minimize downtime and allow for easy servicing. The system supports dual sensors for integration with human-machine interfaces (HMI) or programmable logic controllers (PLC), enabling remote monitoring and automation. The 2200 system replaces traditional pneumatic indicators, eliminating the need for air lines and reducing maintenance complexity, while offering a simple calibration interface to facilitate setup and ongoing adjustments.

View Details

Tubing Hanger 2 3/8

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required. View Details

MS-32 Multistage Steam Turbine

Unleash Unprecedented Power with the Kessels MS-102 Multistage Steam Turbine: The Apex of Efficiency and Reliability In the oil and gas industry, where power and precision are non-negotiable, Kessels Steam Turbines proudly presents the MS-102 Multistage Steam Turbine – a true marvel of engineering designed to redefine excellence in the world of steam turbines. Mastering Back-Pressure Turbines Back pressure turbines have long been the cornerstone of industrial steam applications, and our MS-102 Multistage Steam Turbine takes their capabilities to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines are the linchpin between boiler units and process steam headers, revolutionizing steam utilization and power generation. Efficiency Beyond Compare At the heart of the MS-102 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning perfectly with process demands. Every unit of electrical power generated is consumed precisely as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-102 turbine is not merely a machine; it's a versatile powerhouse ready to excel in an array of applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-102 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature is invaluable when low-volume steam demands and high tolerance for pressure variations are essential. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-102 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the most demanding environments. Unparalleled Versatility: Adapt effortlessly to changing needs, be it for drive applications or eco-friendly power generation, knowing that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-102 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Oil Spill Kit - 5 Gallon Bucket

The spill kit contains a curated selection of components designed for effective and targeted response to oil-based spills. 5 Oil-Only Absorbent Pads Size: Standard 8” x 11.5” Purpose: Swiftly absorb and contain oil-based liquids, preventing further spread and facilitating quick cleanup. 3 Oil-Only Absorbent Pillows Size: 18” x 18” Purpose: Larger pillows for enhanced absorption, particularly useful for managing larger volumes of spilled oil. 2 Oil-Only Absorbent Socks (3"x4') Size: 3 inches in diameter, 4 feet in length Purpose: Contain and control the spread of oil spills, especially effective in restricting the movement of liquids in confined spaces. Disposal Bags Purpose: Facilitate the proper containment and disposal of used absorbent materials, ensuring a responsible and hygienic cleanup process. Nitrile Gloves (1 Pair) Purpose: Essential personal protective equipment for safe handling during the cleanup, protecting hands from direct contact with oil-based substances. Advantages and Applications • The combination of pads, pillows, and socks caters to different spill sizes and scenarios, providing a versatile solution for oil-based spills. • The inclusion of larger pillows enhances the kit's capacity to address spills effectively, ensuring a swift and comprehensive cleanup process. • Nitrile gloves prioritize the safety of personnel involved in the cleanup, preventing direct contact with potentially harmful substances. • Disposal bags contribute to responsible waste management, ensuring the proper containment and disposal of used absorbent materials. The spill kit is well-suited for a range of industrial operations, where oil-based spills may occur. Its comprehensive components make it a valuable tool for addressing various spill sizes and ensuring a quick, efficient, and environmentally responsible cleanup process. The spill kit boasts a total absorption capacity, capable of absorbing up to 15 liters (3.87 gallons) of liquid. This capacity signifies the kit's effectiveness in managing spills of varying sizes, making it a reliable and versatile solution for fluid cleanup. Whether addressing smaller incidents or more substantial spills, the spill kit's impressive absorption capacity ensures a comprehensive and efficient response to liquid-based challenges. Water-Resistant Spill Kit is designed for oil-based spills, showcasing water-resistant properties. The kit's composition ensures effective cleanup of oil spills in diverse environments, including land, rivers, lakes, and oceans. By selectively absorbing oil while repelling water, it provides a reliable solution for managing oil spills in various settings, making it versatile and suitable for a wide range of spill response scenarios. View Details

Safety Valve for Water Injectors 5.71 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Hydrogen Solutions

Unlocking the Power of Hydrogen with Lovat Gas Solutions Methane, the cleanest burning hydrocarbon, holds immense potential for fueling the future. By removing the carbon component, we are left with hydrogen, a clean and renewable source of power. Lovat Gas Solutions understands the transformative power of hydrogen and is here to assist you in realizing the full potential of this remarkable energy source. As a forward-thinking company, we recognize that hydrogen is the fuel of the future. When hydrogen is reacted in a fuel cell, it generates clean power, emitting only water vapor as a byproduct. This makes hydrogen a game-changer in the quest for sustainable and environmentally-friendly energy solutions. Our team of experts at Lovat Gas Solutions is well-versed in the hydrogen sector, equipped with over 80 years of combined experience in compressed gases. We have the knowledge, skills, and dedication to assist you in your hydrogen projects, no matter the scale or complexity. Whether you require hydrogen tube trailers to support fuel cell vehicle demonstrations or other hydrogen-related initiatives, our team is ready to provide the solutions you need. We understand the unique requirements of the hydrogen industry and can guide you through the process, ensuring seamless and efficient hydrogen supply for your projects. Why choose Lovat Gas Solutions for your mobile hydrogen supply needs? 1. Expertise in Compressed Gases: With our extensive experience in compressed gases, we possess a deep understanding of the technicalities and intricacies involved in hydrogen supply. Our team has specific expertise in the hydrogen sector, allowing us to provide tailored solutions for your unique requirements. 2. Commitment to Clean Energy: We share your passion for clean and sustainable energy solutions. By harnessing the power of hydrogen, we aim to contribute to a greener future. Let us assist you in leveraging the immense potential of hydrogen for your projects. 3. Reliable Support: Our team of experts is dedicated to providing reliable support throughout your hydrogen project. We are committed to understanding your specific needs and delivering comprehensive solutions that meet your objectives, ensuring a seamless and successful experience. 4. Collaborative Approach: At Lovat Gas Solutions, we value collaboration and partnership. We believe in working closely with our clients, understanding their goals and challenges, and developing tailored solutions that drive their success. Your satisfaction is our top priority. Embrace the future of clean energy with Lovat Gas Solutions. Contact our experts today to discuss your mobile hydrogen supply needs and how we can assist you in realizing the full potential of this transformative fuel. Together, let's power a sustainable future with hydrogen. View Details

Sabre Retrievable Packer

Baker Hughes introduces the SABRE™ mechanical-set retrievable packer. This packer is a single-string retrievable packer based on the proven performance and reliability of the Hornet packer. It is especially designed to perform reliably in standard-pressure injection and production applications. It is a tension set or compression set and can be landed in compression, tension, or a neutral condition. The SABRE provides reliable performance in a retrievable packer under combined conditions of 250°F (121.1°C) and 7,000 psi (482.6 bar) differential above or below the packer. We can source from current stock or direct from the manufacturer. View Details

Supply Vessels for Offshore Support

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

LM2500 Fixture, Hinge for Upper Compressor Case

LM2500 Fixture, Hinge – Upper Compressor Case is a specialized tool set designed to safely raise and hinge open the upper compressor case of the LM2500 gas turbine engine. This fixture is essential during major maintenance, inspection, or overhaul activities where access to the engine’s internal compressor components is required.

The fixture allows maintenance teams to lift and securely hold the heavy upper compressor case in a hinged, open position. This provides stable and safe access to the compressor rotor and other internal parts, ensuring technicians can carry out detailed inspections or repairs without risking damage to sensitive components.

Made from strong, durable materials, the fixture set is built to support the heavy upper compressor case while keeping everything properly aligned. Its reliable locking and hinge system holds the case securely in place, helping protect the gas turbine.

Compatible with both OEM and MRO procedures, this fixture supports efficient, repeatable maintenance practices and helps reduce overall engine downtime. Whether used in the field or in a dedicated maintenance facility, the LM2500 Hinge Fixture is a critical tool for safe and effective servicing of the LM2500 engine’s compressor section.

View Details

Stand off Protector

ET-30 Single Stage Steam Turbine

Experience Unmatched Efficiency with Kessels ET-30 Single Stage Steam Turbine: Your Powerhouse for Precision In the world of industrial steam turbines, precision, reliability, and efficiency are non-negotiable. Kessels Steam Turbines is proud to introduce the ET-30 Single Stage Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Single Stage Steam Turbines Our Single Stage Steam Turbines are the embodiment of economy and reliability, serving as mechanical drives for Pumps, Fans, Knives, Compressors, and Generators. Over the past two decades, our engineering team has tirelessly reviewed customer and consultant requirements, meticulously addressing queries while adhering to the stringent standards of API 611 and 612. Unmatched Performance, Even at Low Pressure Kessels Steam Turbines have earned their stripes across diverse industries, renowned for their exceptional performance even under challenging low-pressure conditions. With over 15 frame sizes and design options, we offer Single Stage Steam Turbines capable of handling steam conditions and applications up to a staggering 4,000 HP in single-stage configurations. Industries Served Our Single Stage Steam Turbines find their utility across a spectrum of industries, including Oil and Gas, Food Processing, Chemical Processing, Pharmaceutical, Steel, Paper, Sugar, Palm Oil, Marine, Edible Oil, Rice, and Fertilizer. Versatility in Applications Kessels ET-30 Single Stage Steam Turbines can be seamlessly integrated into an array of applications, including Pump Drives, Fan Drives, Mill Drives, Generator Drives, Compressor Drives, Knives, and Shredder Drives. Power Capabilities Our turbines boast power capabilities ranging from 100 HP (75 kW) to a formidable 4,000 HP (3000KW), with speeds of up to 17,000 RPM. They can operate efficiently under pressures of up to 65 Kg/cm2 (925 Psig) and temperatures reaching 460°C (860°F). Design Versatility With seven distinct models, including Horizontal (axial and radial split), Vertical, API 611- and 612-compliant, Overhung, and between-the-bearings wheel designs, our turbines offer a range of options to suit your specific needs. Choose between metallic or carbon seals, Electronic/Hydraulic Mechanical governors, customized steam path components, Mechanical/Electronic safety trip systems, and Direct-Drive or integral gearboxes with suitable lubrication systems. Choose Kessels for Unrivaled Excellence Choosing Kessels Steam Turbines is a commitment to excellence, innovation, and reliability. Our ET-30 Single Stage Steam Turbine exemplifies these principles, offering you: Unmatched Efficiency: Harness the power of steam with unmatched efficiency, maximizing productivity while minimizing waste. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbines ensure uninterrupted operations even in the most demanding industrial environments. Application Versatility: Adapt effortlessly to your unique requirements, confident that Kessels' expertise has you covered. Empower Your Future with Kessels In the competitive landscape of industrial steam turbines, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels ET-30 Single Stage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Miscellaneous Slickline Running Tools

Unlocking Downhole Potential with HOCA Oil Tools' Miscellaneous Running Tools In the dynamic and complex world of oil and gas operations, versatility and precision are key to overcoming the myriad challenges encountered downhole. At HOCA Oil Tools, we understand that every operation is unique, requiring specific tools for optimal performance. This is why we proudly offer our range of Miscellaneous Running Tools, designed to meet the diverse needs of downhole operations with unparalleled efficiency and reliability. HOCA's Miscellaneous Running Tools: A Symphony of Versatility and Efficiency Our Miscellaneous Running Tools encompass a wide array of equipment, each crafted to address specific downhole tasks and challenges. From setting and retrieving plugs, packers, and gauges to handling unique downhole interventions, these tools are the unsung heroes of the oilfield, ensuring smooth and successful operations. Manufactured with precision and built to withstand the harsh downhole environment, our tools embody our commitment to quality, innovation, and functionality. Experience the HOCA Oil Tools Advantage At HOCA Oil Tools, we are dedicated to empowering the oil and gas industry with superior downhole solutions. Our range of Miscellaneous Running Tools is a reflection of this commitment, designed to address the multifaceted challenges of modern downhole operations. Whether you're tackling routine maintenance or facing complex well intervention scenarios, our tools provide the versatility, efficiency, and reliability you need to succeed. Incorporating our Miscellaneous Running Tools into your operations means partnering with a company that understands the intricacies of downhole challenges and is committed to providing solutions that drive success. With HOCA Oil Tools, you're not just choosing tools; you're choosing a partner dedicated to supporting your operational goals with innovative and dependable solutions. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied customers who rely on our Miscellaneous Running Tools to unlock the full potential of their operations. Elevate your downhole success with HOCA Oil Tools – where innovation, efficiency, and reliability converge. View Details

9 5/8" Mech-1 Single Grip Mechanical Set Packer for 29.3-36 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

3-1/2 inch injection valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Fiber Optic Splice on Connectors

Solidifying Your Fiber Optic Networks with Nulux’s Splice-On Connectors In the vast and dynamically intricate world of the Oil and Gas industry, where every drop of energy and every byte of data pulsates through extensive networks, ensuring stability, reliability, and durability in communication is pivotal. In this domain of seamless connectivity, Nulux Network Solutions, proudly presents its stellar service of Fiber Optic Splice-On Connectors, a vital link in fortifying and enhancing your fiber optic networks. Unveiling the Potency of Splice-On Connectors Splice-on connectors employ the refined technology of fusion splicing to facilitate the installation of standard fiber optic connectors even amidst the rigors of the field. In essence, they provide exceptionally low-loss terminations, becoming a fundamental component, particularly in sprawling and multifaceted fiber optic networks where every decibel of loss is critical. Not just a technological solution, splice-on connectors, when adeptly utilized in the right environments, endow the network with a termination that is not only highly durable but can also stoically endure the harsh and often unyielding conditions, so synonymous with the oil and gas sector. Nulux’s Splice-On Connectors: A Synthesis of Technology and Reliability Nulux Network Solutions, steeped in its unwavering commitment to providing products, solutions, and services across the entirety of the energy value chain, seeks to uplift and support the Oil and Gas sector by ensuring that every bit of your data, every communication, is transmitted with absolute integrity. Choosing Nulux for your Fiber Optic Splice-On Connectors means: Embarking on Sustainable Connectivity: Our services go beyond mere installations and solutions; we are your partners in charting a course towards a sustainable future, ensuring that every connection, every splice, is a step towards enhanced operational and environmental efficacy. Optimizing Network Performance: Our splice-on connectors, renowned for their low-loss terminations, ensure that your complex networks are bolstered with optimal performance, minimizing loss and maximizing data transmission integrity. Enduring Harsh Realities: The rugged durability of our splice-on connectors assures that even amidst the most austere and challenging conditions, your terminations remain steadfast, ensuring continuous, unimpeded connectivity. Forge Ahead with Confident Connectivity In an industry where data and communication flow with an undercurrent of criticality akin to the resources being extracted, processed, and transmitted, Nulux Network Solutions stands as a beacon of reliable, sustainable, and superior quality connectivity solutions. Join us in a journey where every splice is a testament to robust, unyielding, and impeccable connectivity, ensuring that every bit of data courses through your networks with precision and reliability, even in the most stringent of environments. Navigate through the pulsating veins of your operations with Nulux’s Fiber Optic Splice-On Connectors – because when it comes to connecting the vital lifelines of your operations, we ensure that every connection counts. View Details

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 24-28 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Hornet Packer

The mechanically set HORNET™ packer offers ease of operation with quarter-turn right to set and release. Converting it for wireline-setting applications is simple and inexpensive. The HORNET packer provides for landing in compression, tension, or neutral positions. Every component from the jay track, to the internal bypass, to the packing-element system and the upper slip assembly has been developed to ensure the HORNET’s setting and releasing reliability. The HORNET EL packer is run and set on electric line using an E-4™ (Product Family No. H43702) with a slow-set power charge or a J™ setting tool (Product Family No. H41371) and a special wireline adapter kit. An L-10™ type on/off seal nipple is run on top of the packer to connect the tubing to the packer and to house a blanking plug when the packer is used as a temporary bridge plug. We can source from current stock or direct from the manufacturer. View Details

Pipe Recovery

Ensuring Continuity with InWaTec Combined’s Electric Line Pipe Recovery Services In the dynamic arena of oil and gas extraction, the unexpected is the only constant. One of the most formidable challenges that can grind operations to a halt is the dreaded scenario of a stuck drill string. Recognizing the critical need for swift and effective resolution, InWaTec Combined offers specialized Electric Line Pipe Recovery Services, designed to address and rectify such downhole dilemmas. When a drill string becomes lodged downhole, it is not just an obstacle; it represents a halt in production, potential damage to resources, and a significant operational cost. InWaTec Combined's Electric Line Pipe Recovery Services are the answer to this industry-wide challenge. Our services employ advanced wireline technology, leveraging the power of electric lines to deliver targeted interventions that free the stuck pipe. Our approach to pipe recovery combines precision-engineered tools with real-time data transmission capabilities. This dual advantage enables our skilled operators to assess the situation accurately and execute recovery procedures with minimal risk to the wellbore or the environment. By integrating our electric line expertise with our pipe recovery operations, we ensure that your drill rig can return to its primary function with minimal downtime. The electric lines play a crucial role; they not only serve as a conduit for the necessary tools to navigate the wellbore but also provide a continuous stream of data back to the surface. This data is critical for making informed decisions during the recovery process, allowing for adjustments and interventions that are precise and situation-specific. At InWaTec Combined, we understand that time is of the essence in such operations. Our Electric Line Pipe Recovery Services are designed for rapid deployment and execution, ensuring that your operations can swiftly transition from a state of suspension to full productivity. Our commitment to innovation, safety, and efficiency is unwavering, as we strive to provide solutions that minimize operational disruptions and maintain the integrity of your wellbore. In the face of stuck pipe challenges, you can count on InWaTec Combined to deliver not just services, but solutions that propel your operations forward. Trust in our expertise to navigate the complexities of downhole recovery, ensuring that your operations remain resilient and robust, no matter what obstacles lie beneath. View Details

Packing O-Ring for Gas Turbine

The Packing O-Ring is a sealing made from durable fluorocarbon rubber, designed for use in high-temperature and chemically harsh environments. Commonly used in gas turbines such as the LM2500 series, it provides a tight seal between components to prevent the leakage of fluids or gases.

This O-ring has an inside diameter of 27/64 inches, a thickness of 5/64 inches, and a hardness of 75 Shore A. It is built to handle operating temperatures from -20°F to 400°F, making it suitable for sealing joints in systems exposed to fuels, oils, and high pressures.

Its compact size and resistance to compression set and fluid exposure make it ideal for use in shafts, housings, and valve assemblies where reliable sealing is critical to turbine performance and safety.

View Details

Wireline Stems

Elevating Downhole Precision: HOCA Oil Tools B.V.'s Slickline Stem Solutions In the intricate arena of oil and gas extraction, downhole operations necessitate tools that promise not only precision but also unwavering reliability. HOCA Oil Tools B.V. takes pride in offering a sophisticated range of slickline stems that cater to a myriad of operational needs, ensuring unmatched performance and safety. Our expertise in crafting these essential tools is evident from the wide array of slickline stems available, designed to enhance the efficiency and safety of wireline operations. Benefits of Using HOCA's Slickline Stems: Enhanced Downhole Control: Our stems provide the necessary weight to ensure smooth and controlled movements of the tool string within the wellbore, enhancing operational precision. Versatility for Various Applications: From standard solid bars to specialized options like lead or tungsten filled, our range caters to different well conditions and requirements. Optimized Performance: The added weight helps counteract wellbore pressure, improving the impact and effectiveness of downhole tools, particularly in jarring operations. Increased Safety: Proper use of slickline stems reduces the risk of wireline snapping and other operational hazards, ensuring a safer environment for field personnel. Durability in Harsh Conditions: Manufactured with high-quality materials, our stems are designed to withstand the demanding conditions of downhole environments. Customization Options: Available in various sizes and materials, our stems can be tailored to meet the specific needs of each operation, ensuring maximum efficiency and effectiveness. Main Features of HOCA's Slickline Stems: Type ‘A’ Stem (Weight Bar): Offers solid bar configurations ideal for standard operations, providing necessary weight to the tool string with threaded connections for easy integration. Type ‘BO’ Lead Filled Stem: Incorporates lead within the stem to add substantial weight, ideal for deeper or more challenging well conditions, ensuring better control and impact. Type ‘EO’ Roller Stem: Features external rollers to minimize friction and wear during operations, enhancing the stem's longevity and performance in deviated wells. Type ‘ED’ Tungsten Filled Stem: Utilizes tungsten to provide maximum weight in a minimal space, perfect for high-pressure wells where additional downforce is required. Customization and Variety: Our stems are available in various lengths, diameters, and thread connections, ensuring compatibility with different tool strings and operational needs. HOCA Oil Tools B.V.'s commitment to quality and innovation is reflected in our slickline stem offerings. By providing a comprehensive range of sizes, materials, and types, we ensure that our clients have access to the tools necessary for their unique downhole challenges. Trust HOCA for your downhole tool needs, where precision meets durability. View Details

MS-152 Multistage Steam Turbine

Introducing the Kessels MS-152 Multistage Steam Turbine: Unleash Unprecedented Power and Efficiency In the fast-paced world of the oil and gas industry, where precision, performance, and reliability are paramount, Kessels Steam Turbines proudly presents the MS-152 Multistage Steam Turbine. This engineering marvel is poised to redefine excellence in steam turbine technology, delivering unmatched power and efficiency. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and the MS-152 takes them to an entirely new level. Available in both single-stage and multi-stage options, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency Beyond Imagination At the heart of the MS-152 Multistage Steam Turbine is the essence of back pressure turbines – the straight-back pressure design. This innovative engineering ensures the seamless harnessing of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Limits Our MS-152 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-152 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-152 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-152 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

FXE 2-7/8 inch Wireline Retrievable Surface Controlled Subsurface Safety Valve

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Tube Fittings Male Connector ISO Tapered Thread – 1/8”, 5/16”, 3/8”, 1/2”, 3/8”, 1/2" – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Tube Fittings Male Connectors are precision parts used to connect tubing directly to a threaded port in oil and gas systems. One side of the connector is designed for tubing, while the other side has an ISO tapered male thread that screws into valves, manifolds, pumps, or other equipment.

These connectors are made for high-pressure applications, with working pressure ratings up to 6000 PSI. The tapered thread design creates a tight, reliable seal that prevents leaks of gas or liquid, even under vibration, temperature changes, or fluctuating pressures.

They are commonly used in drilling rigs, wellhead equipment, hydraulic control lines, instrumentation systems, and process piping. Available sizes include 1/8”, 5/16”, 3/8”, and 1/2”, making them suitable for a wide range of tubing diameters.

By ensuring a strong, leak-free connection, Tube Fittings Male Connectors improve safety, reduce downtime, and support efficient operation in demanding oil and gas environments.

View Details

Gas Lift Kickover Tools

Maximize Downhole Efficiency with HOCA Oil Tools' Advanced Kickover Tools In the highly specialized realm of oil and gas production, achieving operational precision and efficiency is critical. HOCA Oil Tools responds to this need with our superior line of Kickover Tools, specifically designed to enhance gas lift operations and optimize production rates. Our Kickover Tools are engineered to facilitate the precise installation and retrieval of side pocket mandrels and other downhole control devices, ensuring seamless well performance and maximizing production. HOCA's Kickover Tools: Engineered for Excellence HOCA Oil Tools' Kickover Tools are the epitome of innovation in downhole technology. Designed for compatibility with a range of wellbore sizes and specifications, our tools are crafted to offer unmatched precision, durability, and ease of use. Whether you are installing new equipment or retrieving existing devices, our Kickover Tools provide the reliability and efficiency needed for successful downhole operations. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ Kickover Tools means opting for a brand synonymous with quality, innovation, and reliability. Our commitment to excellence ensures that our products meet the high standards demanded by the oil and gas industry, providing our clients with the tools they need to succeed in their downhole operations. By integrating our Kickover Tools into your operational toolkit, you gain not just superior downhole equipment but also a strategic advantage in your production operations. With HOCA Oil Tools, you partner with a company dedicated to supporting your success with cutting-edge solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Kickover Tools to enhance their operational efficiency and well performance. Partner with us, and harness the power of advanced downhole solutions designed for success. With HOCA Oil Tools, elevate your downhole operations with Kickover Tools that set new standards for reliability, efficiency, and accuracy in the oil and gas industry. View Details

Water Injection Well Flow Control Valve 4.31 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

ESP CTR Packer

The Ballycatter Model WC-ESP Packer – Cut to Release Version is a high-performance hydraulic-set production packer designed for completions requiring an electric submersible pump (ESP) below the packer. This single-mandrel, dual-bore packer features a pass-through section, enabling an electric cable to run through the packer, delivering power to the ESP for efficient fluid production.

The packer is hydraulically set by applying tubing pressure against a plugging device, and once engaged, it is mechanically locked in place with an internal slip mechanism. The bi-directional barrel slips secure the packer against well pressures from above and below, ensuring reliable performance in demanding well conditions. Additionally, it is equipped with NPT chemical injection ports and a vent valve port, providing operational flexibility for chemical treatment and pressure regulation.

One of the standout features of the WC-ESP Packer is its Cut to Release function, which enhances retrieval efficiency and simplifies intervention operations. Unlike conventional packers that rely solely on straight pull release, this cut-to-release mechanism ensures controlled retrieval even in wells where high overpull may be a concern. This design reduces the risk of damage to the tubing string and downhole equipment, improving operational safety and reducing intervention costs. The field-adjustable straight pull release allows for on-site modifications, ensuring adaptability across different well environments. The single-piece mandrel construction and Acner Array Packing Element further enhance its durability, making it suitable for hostile downhole conditions while maintaining a reliable seal.

The WC-ESP Packer is furnished with a universal 1.900” API NU connection for penetrators, ensuring compatibility with all major cable pack-off or feed-thru devices. Its bi-directional barrel-slip design provides high loading capacity, ensuring a uniform transfer of load while maintaining structural integrity. With single-trip capability, operators can efficiently set the packer while minimizing rig time and operational complexity.

Whether deployed in standard or high-pressure, high-temperature wells, the Ballycatter WC-ESP Packer – Cut to Release Version offers unparalleled reliability, ease of retrieval, and superior performance for ESP completions.

View Details

Blind Box for Wireline

Unlocking Efficiency with HOCA Oil Tools B.V.'s Advanced Slickline Blind Boxes In the complex world of oilfield services, particularly within the realm of slickline operations, the versatility and precision of downhole tools are of paramount importance. At HOCA Oil Tools B.V., we take pride in our comprehensive range of slickline blind boxes, designed to enhance operational efficiency and safety in the oil and gas industry. Our Type ‘A’ Blind Box series demonstrates our commitment to innovation and quality, catering to a wide range of operational needs. Main Features of HOCA's Slickline Blind Boxes: Diverse Size Range: Available in nominal sizes from .375 inches to 6.687 inches, catering to a broad spectrum of wellbore sizes and wireline operations. High-Quality Materials: Manufactured using robust materials, our blind boxes are designed to withstand the rigors of downhole environments, ensuring reliable performance. Precision Engineering: The precision in crafting each blind box, from threading to length specifications, ensures optimal performance and compatibility with existing slickline tool strings. Customization: Besides standard sizes, we offer custom orders to meet unique operational needs, ensuring that all aspects of the blind box, from thread type to length, are tailored to client specifications. Operational Efficiency: Designed for easy integration and use, our blind boxes help streamline slickline operations, reducing downtime and enhancing overall efficiency. Technical Support: HOCA Oil Tools B.V. provides comprehensive technical support, ensuring that our clients have the guidance needed to select and utilize the most appropriate blind boxes for their operations. At HOCA Oil Tools B.V., we understand the critical nature of slickline operations in the oil and gas industry. Our slickline blind boxes are a testament to our commitment to quality, innovation, and customer service. Choose HOCA for your downhole tool needs and experience the difference that professional-grade tools, backed by industry-leading support and expertise, can make in your operations View Details

5" Mech-1 Single Grip Mechanical Set Packer for 11.5-15 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Check Valve Poppet Type – Male x Female 3/8" NPT – 6000 PSI – ISO 9001

The 3/8" poppet type check valve with male × female NPT connections is designed for uni-directional flow control and backflow prevention in oil and gas systems. The poppet mechanism provides fast response to flow changes and a positive seal under pressure, ensuring protection of pipelines, pumps, and equipment from reverse flow or pressure transients.

The 3/8" size is suitable for small to medium diameter lines, instrumentation, sampling, and control applications. Male × female NPT connections allow secure inline installation, reducing potential leak points and enabling integration into existing piping without additional adapters.

The valve has a standard working pressure of 6000 psi, with optional configurations rated up to 10000 psi. Selectable cracking pressures range from 1/3 to 25 psi, allowing precise adjustment for system requirements. Construction materials include corrosion resistant SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, providing durability in harsh oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability ensures material verification, and additional testing including vibration, temperature, and helium is available for critical applications requiring high reliability.

View Details

Wireline Retrievable FRN 4.5 inch SCSSSV

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

CSA 120 unit, non-Locking FAST charger rack

Maximize Charging Efficiency with the CSA 120 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to present the CSA 120 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-120BC), a large-scale charging solution designed for operations that demand quick and efficient charging of a high volume of equipment. This charger rack is perfect for extensive mining operations, large construction sites, and industrial settings where time and space are of the essence. High-Capacity, Rapid Charging The CSA 120 Unit Charger Rack is engineered to meet the needs of large teams, offering rapid charging times of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This fast charging capability is crucial for operations where equipment must be ready for continuous use, ensuring minimal downtime and maximum productivity. Designed for Space Efficiency Despite its large capacity, the CSA charger rack is designed to be space-efficient. It’s an ideal solution for organizations that need to manage a significant number of devices but have limited space. This single-sided charger rack can be easily placed in equipment rooms or centralized charging stations, optimizing your workspace. Easy Access and User-Friendly The non-locking feature of this charger rack offers easy and quick access to all charging ports, making it straightforward to manage multiple devices. This design is particularly beneficial in dynamic work environments where quick equipment turnaround is essential. Durable and Reliable for Industrial Use Constructed with durability in mind, the CSA 120 Unit Charger Rack is built to withstand the demanding conditions of mining and industrial environments. Its robust construction ensures it can provide reliable performance over time, making it a smart investment for large-scale operations. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and equipment rental providers who need to charge a substantial number of devices efficiently. Its high capacity and fast charging capabilities make it an indispensable tool for operations of considerable size. Upgrade Your Charging Station Equip your operation with the Wisdom CSA 120 Unit Non-Locking FAST Charger Rack from Provix. Visit our website at www.provix.net to discover more about this high-capacity, efficient charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions. View Details

Utility Backup Operators

5-1/2 TR-SCSSSV Model SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

Gauge Root Valve – Male x Female – Lagging Extension – 1/4”, 1/2”, 3/4” – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female with Lagging Extension is designed for controlling and isolating pressure instruments on pipelines where insulation is applied. The lagging extension allows the valve handle to extend above the insulation, ensuring operators can access and operate the valve safely without removing or damaging the insulation. This design maintains the integrity of the insulated pipeline while providing reliable valve operation.

The valve is manufactured to ASME B16.34 standards and meets ISO 9001, PED, and ATEX requirements, ensuring quality and compliance for industrial and oil and gas applications. It is rated for a standard working pressure of 6000 PSI and can be supplied for higher pressures upon request. The temperature range of the valve spans from -50°C to 230°C, with higher temperature options available with graphite sealing. A metal-to-metal body bonnet seal provides high-pressure and high-temperature sealing without the need for O-rings.

The valve features a back-seated stem for added security, a self-centering non-rotating tip for consistent shutoff, and a simple adjustable gland retainer for stable packing. The rolled stem threads and mirror-finished stem through the packing allow smooth operation, reduce packing wear, and provide long-lasting performance. The removable “T” handle and dust cap on the stem further enhance ease of use and protection.

This valve is particularly suitable for applications where pipelines are insulated, allowing for accurate gauge measurement, safe operation, and minimal disruption to insulation.

View Details

Surface Controlled Annular Vent and Sleeve Valve 2 inch

An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue. View Details

HT Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

A-3 LOK SET Packer

The A-3™ LOK-SET™ packer combines advantages of a retrievable packer with the features of a permanent packer. An ability to lock down tubing forces makes the A-3 suitable for a broad range of applications, including production, injection, zone isolation, and remedial operations. The AL-2™ LOK-SET packer is similar to the A-3, and has a larger bore. To provide a simple and reliable injection system for retrieving an injection string without having to unseat the packer: L-10 or L-316 on-off sealing connectors, Product Family Nos. H68420 andH68422. Baker Hughes blanking plug can be used in the seating nipple proile ofthe on-off sealing connector to provide a means of plugging the lower zone whilethe tubing is being pulled. We can source from current stock or direct from the manufacturer. View Details

Tracked-hoe Excavator of various sizes and brands available to fit your needs

Excavators contain four major pieces - a boom, dipper, bucket, and cab, all of which are located on a rotating platform known as the house. Excavators are versatile pieces of equipment that can be used in the following applications (to name just a few); Digging trenches, holes, and foundations Demolition with hydraulic claws, cutters, and breaker attachments Mining, especially, but not only open-pit mining Driving piles, in conjunction with a pile driver Dredging rivers Drilling shafts and rock blasting Snow removal with snowplow and snow blower attachments Forestry mulching Handling materials Brush cutting with saws and mower attachments General landscaping Forestry work Construction View Details

9 5/8" Mech-2 Double Grip Mechanical Set Packer for 40-47 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Fiber Optic Fusion Splicing

Harnessing the Power of Seamless Connectivity in the Oil and Gas Sector with Nulux’s Fiber Optic Fusion Splicing In the intricate and demanding environments of the oil and gas industry, ensuring seamless, reliable, and robust data transmission is paramount. Every segment of the extensive energy value chain, from exploration and extraction to transportation and refinement, hinges upon unfettered communication and data flow. Nulux Network Solutions, steadfast in its commitment to supporting customers towards a more sustainable future, proudly shines a spotlight on one of its sterling services: Fiber Optic Fusion Splicing. Demystifying Fusion Splicing Fusion splicing is not merely a technical process; it’s an art form where two pieces of fiber optic cables are meticulously joined together to craft a permanent bond. It is not merely about connecting two cables; it's about facilitating a continual, unbroken pathway for data, ensuring that your critical information traverses across your networks without hesitation or impedance. The resultant creation is a single, coherent piece of fiber, capable of being utilized in myriad applications, especially where the amalgamation of multiple fibers or cables is necessitated. Given the specialized nature and the precise equipment required to perform fusion splicing, it is indispensable to collaborate with a proficient service provider – a role where Nulux jubilantly finds its calling. Ensuring Unparalleled Data Transmission with Fusion Splicing Embarking upon fusion splicing is not merely opting for a connection; it's choosing the promise of the most reliable, consistent, and high-fidelity data transmission possible. This not only amplifies the effectiveness of your optical network but also significantly bolsters its durability, ensuring that your operations in the oil and gas sectors are perpetually connected and operational. Why Nulux Stands Unparalleled in Fiber Optic Fusion Splicing Our expertise transcends providing products and solutions; it’s a commitment to walk alongside our customers, guiding them on their journey towards not just operational efficiency but towards a future that leans into sustainability. At Nulux, we provide: Expertise Across the Energy Value Chain: From upstream to downstream, our services encapsulate the entirety of the energy value chain, ensuring that every node of your operation is seamlessly connected. Custom Solutions: We delve into understanding the unique operational landscape of your facilities, providing tailored fiber optic solutions that resonate with your specific requirements. Sustainable Future: Aligned with the global pivot towards sustainability, our solutions are crafted not just with an eye on operational efficiency but also with a commitment towards fostering a sustainable future. Infinite Possibilities with Uninterrupted Connectivity Engineering professionals in the oil and gas sector grapple with a multitude of challenges, and data transmission should not be one of them. Fiber Optic Fusion Splicing by Nulux is not merely a service; it's a pledge of uninterrupted connectivity, a guarantee of flawless data transmission, and a commitment to bolstering your operations with unparalleled connectivity solutions. In the realms of the digital evolution of the oil and gas sector, every bit of data is vital, and ensuring it reaches its destination without interruption is critical. Choose Nulux Network Solutions for your Fiber Optic Fusion Splicing, and let’s craft a future where your data flows as seamlessly as your operations. Your network. Our solutions. Nulux’s promise of a connected future. View Details

HP-3 Hydraulic Set High Angle 7" 29-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Oil Absorbent Floats

Having the right tools at our disposal is crucial for some jobs or projects. The Oil Absorbent Float is one such tool that offering a targeted and efficient solution to address oil spills. On this product, each oil absorbent float can absorb up to 10L of oil. Time is of the essence when dealing with oil spills. The Oil Absorbent Float's innovative capillarity absorption mechanism enables a rapid response, swiftly containing and absorbing oil on the water's surface. Whether it's a minor spill or a larger-scale incident, deploying these floats ensures a quick and effective cleanup. Having the oil absorbent floats in your plan is a strategic asset for organizations dedicated to environmental responsibility. Use it when you need a rapid and efficient response to oil spills, when dealing with large-scale cleanup efforts, or as a proactive measure to safeguard the environment. By integrating the Oil Absorbent Float into your toolkit, you contribute to the collective effort to protect our planet's natural resources and ensure a sustainable future. The Oil Absorbent Float is designed to be user-friendly and easy to deploy in various situations. Here's a guide on how these floats is typically used: a. Open the packaging. b. Inspect the floats for any damage or defects. Ensure that the floats are clean and free from any contaminants. c. Identify the area affected by the oil spill. Place the oil absorbent floats strategically in a way that maximizes coverage. d. Once placed on the water surface, the oil absorbent floats start their work immediately. The capillarity absorption mechanism kicks in, and the floats begin absorbing the oil on contact. This rapid response is crucial for preventing the spread of the oil and minimizing environmental impact. e. Monitor the absorption process and adjust the placement of the floats as needed. f. The oil absorbent floats are designed to have a high absorption capacity, often capable of absorbing up to 10 liters of oil per float. g. Once the oil absorbent floats have reached their absorption capacity or the spill is under control, safely remove the floats from the water. Carefully lift them out. By following these steps, users can effectively deploy the Oil Absorbent Float to address oil spills with ease. The simplicity of the design and deployment process makes these floats a practical and efficient solution for various industries and organizations involved in environmental cleanup efforts. View Details

Sand Trap

Introducing Sivam's Sand Trap: The Ultimate Solution for Sand Separation in the Oil and Gas Industry! Our innovative sand separation technology is designed to improve the efficiency and performance of oil and gas operations by effectively removing sand from production streams. Sivam's Sand Trap is a game-changer in the oil and gas industry. Our cutting-edge technology works by changing the flow parameters, reducing the flow velocities to the point where the sand drops out while gas and fluids are carried through. This process involves no bags, filters, screens, and virtually no pressure drop, making it the most efficient and cost-effective solution for sand separation on the market. Our Sand Trap is designed with durability and reliability in mind. It can handle high flow rates and is built to withstand harsh conditions, ensuring optimal performance even in the most challenging environments. And with no moving parts, it requires minimal maintenance, reducing downtime and operating costs. One of the key benefits of Sivam's Sand Trap is its versatility. It can be used in a variety of applications, from primary production to enhanced recovery, and can be customized to meet the specific needs of your operation. And with its compact design, it can be easily installed and integrated into your existing system. At Sivam, we pride ourselves on providing exceptional customer service and support. Our team of experts is always available to assist you with any questions or concerns you may have, ensuring that you get the most out of your Sand Trap. Overall, Sivam's Sand Trap is the ultimate solution for sand separation in the oil and gas industry. With its cutting-edge technology, versatility, and efficiency, you can trust that our Sand Trap will exceed your expectations. Contact us today to learn more about how Sivam's Sand Trap can benefit your business. View Details

TIG AC/DC 281 Pulse Welding Machine

Equalizing Sub-Assembly

HOCA Oil Tools: Innovating Efficiency with State-of-the-Art Equalizing Subs In the ever-evolving landscape of the oil and gas industry, the need for precision and efficiency in downhole operations is paramount. At HOCA Oil Tools, we recognize this imperative and respond with our innovative Equalizing Subs. These tools are specifically designed to enhance the operational capabilities of sub-surface controls like Locking Mandrels and Tubing Mandrels, ensuring seamless and efficient downhole activities. HOCA’s Equalizing Subs: Engineered for Unmatched Performance Our Equalizing Subs are crafted to facilitate the equalization of pressure differentials across Sub-Surface Controls, crucial for the safe and effective retrieval of these components. Available in various types, including 'ROTB', 'ROTF', 'ROTC', 'ROTD', and others, each is designed to meet distinct downhole conditions and operational needs, ensuring versatility across different well environments. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools' Equalizing Subs means selecting a solution backed by innovation, quality, and unwavering support. Our commitment to excellence ensures that our products not only meet but exceed the stringent demands of the oil and gas industry. Whether addressing standard operations or facing unique downhole challenges, our Equalizing Subs provide the reliability and performance essential for today's downhole activities. Incorporating our Equalizing Subs into your operational toolkit is a step towards enhanced efficiency, safety, and success. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your downhole challenges with cutting-edge solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations. Partner with us to harness the power of advanced downhole solutions designed for the modern oilfield landscape. With HOCA Oil Tools, empower your downhole operations with tools that redefine efficiency, reliability, and performance in the oil and gas industry. View Details

2” Tubing End Locator

The 2” Tubing End Locator is a mechanical downhole tool used to determine the physical end of production tubing during well intervention or maintenance activities. It is a critical component in operations where it is necessary to confirm tubing length or avoid tool deployment beyond the tubing’s bottom, such as during setting packers, logging, or fishing operations.

In a typical well setup, production tubing does not always terminate at a predictable or recorded depth. The tubing end locator provides a reliable way to identify the true end of the tubing string by using a spring-loaded finger mechanism that reacts upon reaching the tubing’s bottom. This reaction is detectable at the surface, providing the operator with a clear and immediate indication without relying solely on depth readings or assumptions.

This specific model is intended for tubing sizes ranging from 2" to 2-1/2" outer diameter. It is designed with a maximum tool O.D. of 1.750", which ensures clearance inside the tubing, and includes a 1.375" fishing neck, a standardized feature that allows the tool to be retrieved if necessary using conventional pulling tools.

Threading is provided on both ends for integration into tool strings: a 15/16 - 10 UN pin connection on top and a 1 - 11.1/2 NPT box connection at the bottom. This allows the locator to be run inline with other mechanical or wireline-conveyed tools. These standard thread forms ensure compatibility with widely used downhole equipment and deployment systems.

Constructed from high-strength alloy steel, the tool is designed to withstand the mechanical stress, temperature variations, and chemical exposure typical in oil and gas well environments. While not a pressure-control device, its materials and design are selected to perform reliably under downhole pressure conditions encountered during standard intervention work.

The 2” Tubing End Locator provides a mechanical means of depth verification that does not rely on electronics, sensors, or depth counters. It is a simple, durable, and effective tool for reducing uncertainty and improving operational safety in the wellbore.

View Details

Drive Down Bailer

Enhance Your Downhole Recovery Operations with HOCA Oil Tools' Drive Down Bailers In the intricate world of oil and gas exploration and production, addressing downhole challenges with precision, efficiency, and innovation is key to operational success. HOCA Oil Tools specializes in the development and distribution of premium downhole slick line tools, including our high-performance Drive Down Bailers. Designed for the effective retrieval of debris, our Drive Down Bailers are indispensable for maintaining clear, productive wellbores. Drive Down Bailer: The Ultimate Solution for Debris Retrieval HOCA’s Drive Down Bailers are engineered for maximum efficiency in the removal of sand, debris, and other obstructions from wellbores. These tools are crucial in situations where traditional bailers fail, offering a proactive solution to maintain well integrity and operational flow. Constructed from robust materials, our Drive Down Bailers withstand the harsh downhole conditions, ensuring reliability and durability. Empower Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with tools that solve real-world challenges. Our Drive Down Bailers are a testament to our commitment to innovation, quality, and customer satisfaction. By incorporating these bailers into your operations, you can expect not only to resolve downhole debris issues but also to enhance the overall efficiency and safety of your wellbore maintenance tasks. Investing in HOCA's Drive Down Bailers means choosing a partner committed to your operational success. Embrace the future of downhole operations with HOCA Oil Tools, where efficiency, reliability, and customer satisfaction drive everything we do. Experience the difference in your downhole operations with HOCA's Drive Down Bailers – your solution to maintaining clear, efficient, and productive wells. Trust in HOCA Oil Tools for unmatched downhole solutions that propel your operations forward. View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type