Ballycatter.ca - Industrial Equipment

O-rings and Gaskets for various applications including re-dress of downhole equipment

An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, forming a seal at the interface. View Details

LM2500 Fixture, Hinge for Upper Compressor Case

LM2500 Fixture, Hinge – Upper Compressor Case is a specialized tool set designed to safely raise and hinge open the upper compressor case of the LM2500 gas turbine engine. This fixture is essential during major maintenance, inspection, or overhaul activities where access to the engine’s internal compressor components is required.

The fixture allows maintenance teams to lift and securely hold the heavy upper compressor case in a hinged, open position. This provides stable and safe access to the compressor rotor and other internal parts, ensuring technicians can carry out detailed inspections or repairs without risking damage to sensitive components.

Made from strong, durable materials, the fixture set is built to support the heavy upper compressor case while keeping everything properly aligned. Its reliable locking and hinge system holds the case securely in place, helping protect the gas turbine.

Compatible with both OEM and MRO procedures, this fixture supports efficient, repeatable maintenance practices and helps reduce overall engine downtime. Whether used in the field or in a dedicated maintenance facility, the LM2500 Hinge Fixture is a critical tool for safe and effective servicing of the LM2500 engine’s compressor section.

View Details

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

Pipe Fittings Hex Nipples Male NPT – 1/16", 1/8", 1/4", 3/8", 1/2", 3/4", 1" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

The Hex Nipple Pipe Fitting with Male NPT threads is a precision component used to connect two female-threaded pipes or fittings in instrumentation and process control systems. The male tapered threads create a tight, leak-resistant seal when engaged with a corresponding female NPT connection, making it suitable for high-pressure and high-temperature applications commonly found in the oil and gas industry.

Manufactured from high-quality bar stock, the fitting provides strength and durability. Threads are capped and carefully packed to prevent damage during transport. The fitting is marked with the manufacturer’s name, size, material, and heat code for traceability. The design ensures proper thread engagement, reliable sealing, and smooth flow of fluids or gases.

These fittings meet or exceed ASME B1.20.1 standards for NPT threads and are rated according to ASME B31.3 for process piping, supporting safe and consistent operation in industrial environments. The male NPT design allows easy installation while maintaining a durable, leak-tight connection over the life of the system.

View Details

Oil-Only Absorbent Socks

R-3 Double Grip Retrievable Packer

The R-3™ packer is a versatile production packer intended for a broad range of production applications. It is a compression-set packer, suitable for stimulation and treating applications in a double-grip configuration. Applications in which excessive bottomhole pressures have been depleted, a single-grip version can be used as an economical production packer. The R-3 single-grip retrievable-casing packer is set with one-fourth-turn right-hand rotation and can be released with straight pickup. We can source from current stock or direct from the manufacturer. View Details

Injection Valve Subsurface Safety 4.48 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Explosive Cutter

Accelerating Well Recovery with InWaTec Combined's Explosive Cutter Services In the demanding field of oil and gas extraction, time is a resource just as precious as the commodities we extract. For operations facing the challenge of stuck pipe, rapid and decisive action is paramount. InWaTec Combined’s Explosive Cutter Services offer a swift and effective solution to sever tubing and expedite the removal of obstructions, ensuring operational continuity and minimizing costly downtime. Stuck pipe scenarios are not just inconvenient—they are costly disruptions that can jeopardize the integrity of the well and escalate operational expenses. Our Tubing/Drill Pipe Cutters are designed to address these incidents with unmatched efficiency. When tubing becomes immovable, our cutters are deployed to deliver a clean, precise cut, allowing for the quick retrieval of the stuck sections. The selection of the cutter is a critical decision, and our technical experts are adept at determining the optimal diameter that can navigate the wellbore and deliver maximum performance. The largest possible cutter that the well can accommodate is used, ensuring that the cut is complete and that the well integrity is maintained throughout the operation. InWaTec Combined’s cutter technology is a blend of high-grade materials and explosive precision, a formula that guarantees a cut above the rest. Our cutters are not merely tools; they are the bearers of efficiency and effectiveness, embodying our commitment to providing solutions that keep your operations on track. Safety is paramount in all our explosive cutting operations. We rigorously adhere to the highest safety standards, ensuring that every cutter deployment is conducted with the utmost regard for the well's structural integrity and the surrounding environment. Our clients can rest assured that our Explosive Cutter Services are not only effective but are executed with an unyielding commitment to safety protocols. Choosing InWaTec Combined's Explosive Cutter Services means opting for a partner who understands the urgency and intricacies of well recovery. We bring expertise, precision, and reliability to the fore, ensuring that even in the face of challenging stuck pipe situations, your operations can swiftly resume. Let us bring our cutting-edge solutions to your wellsite, and together, we can overcome the obstacles that stand in the way of productivity and progress. View Details

2.62 inch Water Injection Valve WI

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

HDI Gauge Batteries, Parts, and Repair Kits

HDI Gauge systems used in oil and gas operations are often exposed to harsh environments and continuous use. To maintain accuracy, reduce downtime, and extend the service life of these systems, it is critical to have access to replacement components that are both durable and compatible. A full range of spare parts is available to support maintenance needs, including displays, sensors, cables, processor boards, connectors, and housing elements.

These parts are designed to be interchangeable across compatible models, allowing operators to replace worn or damaged components without requiring full system replacement. This modularity improves cost efficiency and simplifies logistics, especially in remote field locations. Most components are field-replaceable, reducing the need for specialized service technicians and enabling faster return to operation.

Processor boards and display units typically share a common design across multiple gauge models, streamlining inventory requirements and providing flexibility during urgent repairs. Sensors are matched with gauge heads for calibration accuracy but can be easily re-paired and recalibrated in the field or through service support if needed.

Using certified or manufacturer-specified replacement components ensures continued compliance with safety standards, maintains the expected measurement accuracy, and supports the longevity of the equipment. These parts are often backed by service documentation or part tracking for maintenance records and equipment history management.

In short, a well-organized supply of compatible, high-quality parts is essential for effective pressure and temperature gauge system upkeep in demanding industrial settings.

View Details

Wisdom Lamp 4A

Illuminate Your Adventures with the Wisdom Lamp 4A: The Ultimate Multi-Purpose Headlamp from Provix Provix is thrilled to introduce the Wisdom Lamp 4A, a versatile and powerful multi-purpose headlamp designed to meet a variety of lighting needs. Whether you're a professional in the mining industry or an outdoor enthusiast, the Lamp 4A is engineered to provide exceptional illumination and functionality. Powerful and Versatile Lighting Options The Lamp 4A features three brightness modes: High (HI), Medium (ME), and Low (LO), catering to different lighting requirements. With an impressive light luminous flux of 533 lm (HI), 265 lm (ME), and 50 lm (LO), and an initial lighting degree of 25,000 lx (HI), 12,000 lx (ME), and 1,800 lx (LO), this headlamp ensures clear visibility in various environments. Long-Lasting and Rechargeable Battery Equipped with a robust 7,000mAh battery and a rated voltage of 3.7V, the Lamp 4A provides continuous discharging times of 5 hours (HI), 13 hours (ME), and 60 hours (LO). The battery is rechargeable, offering up to 1,200 cycles in reasonable working conditions, making it both sustainable and reliable. Unique Feature: Charge Your Cellphone In addition to its lighting capabilities, the Lamp 4A can charge your cellphone, making it a handy tool for emergencies or outdoor activities. This unique feature, coupled with its USB charging ability and a quick 5-hour charging time, adds to its versatility and appeal. Built for Durability and Safety The Lamp 4A is designed with safety in mind. It is water-proof with an IP68 rating and includes a short circuit protection time of less than 320μs. Its durable design ensures it withstands harsh conditions, suitable for both professional and recreational use. Lightweight and Compact Design Weighing just 169g (5.96 oz) and with dimensions of 84x69x50mm (3.3x2.7x2.0in), the Lamp 4A is compact and comfortable to wear, making it ideal for extended use without causing fatigue. SOS Function for Emergency Situations An added SOS function makes the Lamp 4A a vital tool for emergency situations, providing an extra layer of safety during outdoor adventures or in hazardous work environments. Get Your Wisdom Lamp 4A Today The Wisdom Lamp 4A is available now at Provix, ready to light up your work and adventures with its exceptional features. . Experience the difference with the Lamp 4A – your reliable companion in lighting. View Details

LM2500+ G4 Gas Turbine

The LM2500+G4 is an advanced variant of the LM2500+ aeroderivative gas turbine, designed to provide increased output and thermal efficiency through a set of targeted design upgrades. It retains the core architecture of the LM2500+ but introduces changes to the flow path that increase overall engine performance.

The primary difference between the LM2500+G4 and the LM2500+ is the increased flow capacity in the high-pressure (HP) compressor, HP turbine, and low-pressure turbine. These modifications raise the overall pressure ratio from 23.6 to 24.2, resulting in higher thermal efficiency and greater mass flow. The design changes are relatively limited, focusing mainly on minor geometry adjustments to blades and vanes to accommodate the increased flow.

In the high-pressure turbine, the G4 version includes improved blade cooling and upgraded materials. These changes enable the turbine to handle higher temperatures, contributing to both improved performance and component durability. To maintain proper rotor thrust balance with the updated flow path, the effective area of the compressor discharge pressure seal was also adjusted.

In terms of operational performance, the LM2500+G4 offers measurable improvements over the LM2500+ across a variety of ambient conditions. For example, it delivers approximately 11% more power in cold conditions and 12% more in hot conditions (running data to -50 deg F and start data to –40 deg F). In combined-cycle mode, the G4 variant is expected to provide a power increase of 8.5% and a heat rate improvement of 0.75% compared to the LM2500+.

The LM2500+G4 supports two power turbine configurations:

A six-stage, low-speed power turbine, typically used for power generation applications with a nominal speed of 3600 rpm.
A two-stage High-Speed Power Turbine (HSPT), used for mechanical drive applications, designed for a nominal speed of 6100 rpm, with an operating range from 3050 to 6400 rpm.

Both configurations support operation over a cubic load curve, which allows the turbine to match power output with varying mechanical loads — a feature especially useful in pipeline compression and similar variable-load industrial applications.

View Details

7 5/8" HP-6 Hydraulic Set High Angle Production Packer for 20-24 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Scaffolding for onshore and offshore

Finish the job in any and all conditions since this product is weather-resistant and durable so you can enjoy it for many years to come. Each frame is sold separately. Note that the galvanized cross braces and aluminum platforms with plywood are not included. When assembled, this scaffold has a load capacity of up to 4,960 pounds. View Details

Hydraulic Set Large Bore Retrievable Production Packer

The HPL-1 Large Bore Hydraulic Set Retrievable Production Packer is a high-performance isolation toolactivated using tubing pressure, eliminating the need for mechanical manipulation. When pressure is applied against an underneath plugging device, the hydraulic setting mechanism engages, compressing the multiple packing element system to create a secure seal between the tubing and casing. Designed for versatility, the HPL-1 is available in 7” and 9 5/8” large bore options, making it ideal for high-volume production and injection applications. This design allows the packer to be set at any depth, making it particularly effective in low hydrostatic head wells while ensuring well integrity after the tubing is in place, even in large-diameter casing environments.

Once set, the double-grip system secures the packer in position using hydraulic hold-down pistons and a body lock ring, preventing unwanted movement due to pressure fluctuations or tubing expansion. Themechanically locked setting force ensures that reductions in bottom-hole pressure or tubing contraction do not weaken the seal, providing long-term reliability in production, injection, and zonal isolation applications. With the 7” and 9 5/8” options, the HP-1 is well-suited for high-flow rate completions, offering exceptional sealing performance and operational efficiency in larger casing sizes.

To retrieve the packer, operators can apply a straight upward pull, or, if equipped with the optional right-hand rotational release, use torque combined with a shear release mechanism. This flexibility allows for efficient removal in both standard and deviated wells, making the HP-1 packer a versatile, high-capacity solution for a wide range of completion designs, including large-bore well systems requiring robust isolation and retrieval capabilities.

View Details

Valve Manifolds 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT is designed to provide a reliable and compact solution for connecting impulse lines to pressure transmitters and gauges. This manifold allows operators to safely isolate instruments from the process for maintenance, calibration, or testing, without the need to shut down the system. The T-type configuration features two valves that control flow to and from the instrument, enabling efficient block, bleed, and vent operations.

The pipe-to-pipe design ensures a direct connection to the piping system, which reduces potential leak points and simplifies installation. It is suitable for high-pressure applications, with a standard working pressure of 6000 PSI and options available for higher pressures. The manifold is built with a metal-to-metal body and bonnet seal for enhanced durability and temperature resistance, with materials that can comply with NACE MR 01 75 standards for corrosion resistance.

Additional features include a removable T-handle for low-torque operation, self-centering non-rotating stems for consistent shutoff, and a dust cap to prevent contamination. Packing is positioned below the stem threads to isolate the threads from the process media, and the stem’s rolled threads provide smooth operation and long life. The manifold is 100% factory tested for leakage and performance, ensuring reliable operation in critical oil and gas applications.

View Details

HP-3 Hydraulic Set High Angle 5 1/2" 20-23 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Casing Collar Locator (CCL)

Precision Depth Control with InWaTec Combined's Casing Collar Locator Services Precise depth measurement is the linchpin of successful well completion and intervention. At InWaTec Combined, we recognize the pivotal role of accurate depth correlation in the lifecycle of a well, which is why we offer our specialized Casing Collar Locator (CCL) Services. These services are not just about measurement; they are about enhancing the precision of every operation that follows. The CCL is an essential tool in our suite of downhole diagnostic services, used to establish an accurate depth correlation between the casing collars and the open hole log of the well. This correlation is vital for a multitude of subsequent operations, particularly for the strategic placement of perforations and the depth assurance of wireline services within the cased hole. Typically run in tandem with a gamma ray, Cement Bond Log (CBL), or other cased-hole logging tools, our CCL services ensure that completion depths chosen from open hole logs are accurately transferred to the cased well environment. This step is critical because it anchors the location of future operations to a verified depth reference, ensuring that all interventions are performed at the intended stratigraphic intervals. The CCL log becomes a key depth control measurement, serving as a guide for precision perforating. It allows us to target the exact depth for the perforation guns, ensuring that we connect the wellbore to the hydrocarbon-bearing zones with pinpoint accuracy. This service is particularly crucial in complex wells where even small deviations can lead to significant complications. At InWaTec Combined, we understand that the integrity and success of cased-hole wireline services hinge on the reliability of depth measurements. Our CCL services provide a foundation of certainty upon which all subsequent interventions can confidently build. With our CCL technology, clients can expect a seamless transition from logging to completion, perforating, and beyond. Opting for InWaTec Combined's CCL Services means choosing a partner committed to precision and reliability. Our advanced tools, combined with our expert analysis, provide the clarity and assurance needed to execute well interventions with confidence. Ensure your operations are grounded in accuracy with InWaTec Combined, where every millimeter counts towards the success of your well. View Details

Wireline Drift

Maximize Well Integrity and Performance with HOCA Oil Tools' Tubing Drifts In the complex and demanding environment of oil and gas extraction, ensuring the integrity and functionality of downhole tubing is paramount. At HOCA Oil Tools, we understand these challenges and are dedicated to providing solutions that enhance the safety, efficiency, and productivity of your operations. Our Tubing Drifts stand out as a testament to our commitment to quality and precision in downhole slick line tools. HOCA’s Tubing Drifts: Precision Engineered for Optimal Performance Tubing Drifts are essential tools designed to ensure the clear passage within downhole tubing, preventing costly blockages and ensuring the smooth operation of subsequent downhole tools and processes. Made from high-quality materials and engineered to meet rigorous industry standards, HOCA Oil Tools’ Tubing Drifts are designed to provide accurate measurements and clearances, ensuring your tubing is free from obstructions and ready for operation. Experience the HOCA Difference in Downhole Operations At HOCA Oil Tools, our mission is to provide the oil and gas industry with downhole tools that exceed industry standards and meet the complex demands of modern drilling and extraction processes. Our Tubing Drifts embody this mission, offering precision, reliability, and efficiency to enhance your downhole operations. Incorporating HOCA’s Tubing Drifts into your downhole tool inventory signifies a step towards optimized well maintenance, enhanced safety, and increased operational efficiency. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your success with innovative solutions and expert service. Choose HOCA Oil Tools’ Tubing Drifts for your downhole operations and join the ranks of satisfied customers who trust our tools to maintain the highest standards of well integrity and performance. Elevate your downhole operations with HOCA Oil Tools – where quality meets innovation. View Details

Circulating Type Blanking Plugs for Nipples

HOCA Oil Tools: Enhancing Well Integrity with Circulating Type Blanking Plugs for Nipples In the intricate world of oil and gas extraction, maintaining well integrity while ensuring operational efficiency is paramount. HOCA Oil Tools, a leader in providing innovative downhole slick line tools, introduces its Circulating Type Blanking Plugs for Nipples, designed to meet and exceed these essential industry requirements. Tailored for seamless integration with landing nipples in wellbores, our products stand as a testament to our commitment to quality, efficiency, and safety in downhole operations. HOCA's Circulating Type Blanking Plugs for Nipples: Engineered for Superior Performance Our Circulating Type Blanking Plugs are meticulously designed to offer robust sealing and pressure control capabilities within the wellbore. These tools are essential for operators looking to manage fluid movement, conduct pressure tests, and maintain well integrity during various stages of well operations. Constructed from high-grade materials and engineered to meet the rigors of the downhole environment, our blanking plugs ensure reliability, durability, and performance. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Circulating Type Blanking Plugs for Nipples means selecting a solution that embodies innovation, operational excellence, and reliability. Our commitment to delivering high-quality downhole solutions ensures that our products not only meet but surpass the challenges faced in modern oilfield environments. By incorporating our Circulating Type Blanking Plugs into your downhole operations, you take a step towards enhanced well integrity, safety, and operational efficiency. With HOCA Oil Tools, you gain not just a supplier but a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Circulating Type Blanking Plugs for Nipples. Partner with us, and elevate your downhole operations to new levels of success and efficiency. With HOCA Oil Tools, enhance your downhole activities with tools that set new industry standards for reliability, safety, and performance in the competitive world of oil and gas extraction. View Details

Isolation Packer HP-2 Hydraulic Set 7" Packer

Setting Mechanism

The Ballycatter WC-HP-2 Isolation Packer is hydraulically set, meaning it is activated using tubing pressure rather than mechanical manipulation. During deployment, the packer is run into the wellbore as part of a stacked packer system, positioned above another hydraulic retrievable packer.

Once in place, hydraulic pressure is applied through the tubing, which compresses the packing element system, forcing it outward against the casing wall. Simultaneously, the slips engage to anchor the packer in position, ensuring a secure, pressure-tight seal within the isolation zone. The hydraulic setting eliminates the need for tubing rotation, making it particularly effective for deviated wells or conditions where mechanical manipulation is restricted.

Once set, the packer remains mechanically locked in place, independent of trapped hydraulic pressure. This design ensures that differential pressures, wellbore fluid movement, or thermal expansion and contraction do not compromise the seal, maintaining long-term zonal isolation. The packer can be used for treatment, injection, or production operations, providing a stable isolation barrier between zones for efficient fluid control and optimized reservoir management.

Retrieval Mechanism

The WC-HP-2 Isolation Packer is retrieved using a straight-pull shear release system, which allows for efficient and controlled removal without requiring tubing rotation.

When an upward force is applied to the tubing, the shear-release pins disengage, allowing the packing elements to relax and the slips to retract. This mechanical release mechanism ensures that retrieval forces remain unaffected by differential pressure, providing operators with a predictable and reliable method for packer removal.

For added flexibility, the shear-release force can be adjusted before running the packer to accommodate different well conditions.

The compact, debris-resistant design of the packer facilitates smooth retrieval, even in doglegged or deviated wells, reducing the risk of tool sticking.

By providing a simple, efficient release mechanism, the WC-HP-2 minimizes rig time and operational costs, making it a practical and cost-effective solution for multiple-zone completions and casing isolation applications.

View Details

Onshore Electric Line Services

Revolutionizing Wellbore Diagnostics with InWaTec Combined's Onshore E-Line Services In the world of oil and gas exploration and production, knowledge is power—and power lies in the data. At InWaTec Combined, we understand that the foundation of effective well servicing is the precision and reliability of information obtained from deep within the Earth. That's where our Onshore Electric Line (E-Line) services come into play, a game-changer in the realm of wellbore diagnostics. An E-Line is, in essence, an electric cable capable of performing extraordinary tasks. Lowered into the wellbore, this lifeline serves as a crucial conduit between the heart of the well and the watchful eyes of our engineers. Its primary function is to transmit data regarding wellbore conditions, a task it performs with exceptional efficiency and accuracy. The brilliance of the E-Line service lies in its simplicity and its capability. As it descends through the geological layers, the e-line gathers critical data through logging activities, painting a clear and comprehensive picture of the well's status. This information is not just data; it is a narrative of the well's health, productivity, and potential. Our E-Line services are not merely about data collection; they are about enabling informed decision-making that can lead to enhanced production efficiency, increased safety, and minimized environmental impact. With precise information, interventions can be smarter, quicker, and more effective, leading to a significant reduction in downtime and operational costs. InWaTec Combined's commitment to excellence in E-Line services is unwavering. We invest in cutting-edge technology and the continuous training of our specialists to ensure that our clients receive the most reliable and advanced diagnostic services available. We're not just service providers; we're partners in your quest to unlock the full potential of your assets. In a sector where every decision counts, InWaTec Combined's Onshore Electric Line services stand as your assurance of precision, reliability, and insight. Let us illuminate the depths of your wellbore with data that drives success. View Details

5" Mech-1 Single Grip Mechanical Set Packer for 11.5-15 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Injection Valve 4 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Pneumatic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Ball Valve Lever Operated – 3-Way Female x Female Side Entry End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated 3-Way Female × Female Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows flow to be directed between multiple pipelines, making it ideal for applications such as flow diversion, sampling lines, injection systems, or process line bypasses.

The valve supports split flow and is suitable for pressures up to 6000 PSI (maximum 10000 PSI on request) and temperatures from –40 °F to 450 °F (–40 °C to 232 °C).

The female × female connections enable secure inline installation without the need for male fittings, simplifying assembly and reducing potential leak points. The valve features a floating ball design for seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions.

It is manufactured and tested to ASME B16.34 standards, pressure-temperature rated to ASME B31.3, and type-tested to MSS-SP-99, providing verified performance and reliability in industrial environments.

Operation is efficient and reliable with a quarter-turn lever, allowing fast control with low torque. The internally loaded stem with shoulder prevents blowout, enhancing safety, while replaceable seats and packings extend service life. Fire-safe designs and optional compliance with NACE MR0175 standards are available, and heat code traceability ensures material verification.

Built for demanding industrial environments, the valve is suitable for a wide range of oil and gas applications where flow control, diversion, and durability are critical.

View Details

3" Globe-Style Gas Metering Valve

The 3” Globe-Style Gas Metering Valve is designed to deliver accurate and consistent fuel control in industrial gas turbines, including both Dry Low Emissions (DLE) and Single Annular Combustor (SAC) engine types. This valve ensures that the correct amount of gas fuel is metered into the engine based on real-time operating conditions—essential for achieving stable combustion, optimal turbine performance, and reduced emissions.

With an accuracy of ±3% of flow point and a full-stroke response time of 175 milliseconds, it supports precise adjustments to the fuel-to-air ratio, even under fluctuating load conditions. This level of performance is critical for maintaining turbine efficiency, lowering NOx and CO emissions, and supporting regulatory compliance.

The globe-style design allows for smooth fuel flow control, making it ideal for high-capacity, high-pressure turbine applications, such as those found in the oil and gas industry. Built to withstand extreme temperatures and pressures, the valve is available with certifications such as ATEX Zone 1 and 2, PED, UL, and NEC Class 1, ensuring safe operation in hazardous environments.

This metering valve supports modern turbine control systems and is part of a generation of components that prioritize long-term reliability, reduced maintenance needs, and consistent field performance.

View Details

Cranes of various sizes and ratings for onshore lifting and placement

Mobile cranes can be used to access narrow passages and navigate project sites that have limited space, making them a practical solution for many industries, site conditions, and materials. Let us help manage your crane and material handling requirements for your project. View Details

Monoflange SBB Double Block & Bleed Valve – Flange x Thread – OS&Y Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange SBB Double Block and Bleed Valve with Flange x Thread connections features an OS&Y isolation valve and a needle drain, providing dual isolation in a single compact assembly. It is designed for oil and gas applications where safe venting of trapped pressure between isolation points is required, such as instrument or gauge isolation, chemical injection, and sampling lines.

The valve’s monoflange design integrates both isolation and venting functions in one unit, reducing the number of joints and potential leak paths while saving space and simplifying installation. The OS&Y isolation valve offers clear visual indication of open or closed status, allowing operators to quickly verify valve position. The needle drain provides controlled venting of pressure trapped between the isolation points, ensuring safe operation during maintenance or sampling procedures.

The valve is suitable for flange sizes from 1/2” to 2” and pressure classes from 150 to 2500, with options for reduced or full bore depending on process requirements. It is available in a variety of materials including stainless steel 316, 316L, duplex, super duplex, Hastelloy, Inconel, and Monel, and can be manufactured to meet NACE MR-0175 standards. The design complies with recognized standards such as ASME B16.34, API 6D, and ISO 17292, and is tested to low emission requirements.

This configuration is ideal for oil and gas operations requiring reliable dual isolation, precise venting, and compact installation in critical piping systems.

View Details

HP-1 Hydraulic Set 9 5/8 inch Packer

The HPL-1 Large Bore Hydraulic Set Retrievable Production Packer is a high-performance isolation toolactivated using tubing pressure, eliminating the need for mechanical manipulation. When pressure is applied against an underneath plugging device, the hydraulic setting mechanism engages, compressing the multiple packing element system to create a secure seal between the tubing and casing. Designed for versatility, the HPL-1 is available in 7” and 9 5/8” large bore options, making it ideal for high-volume production and injection applications. This design allows the packer to be set at any depth, making it particularly effective in low hydrostatic head wells while ensuring well integrity after the tubing is in place, even in large-diameter casing environments.

Once set, the double-grip system secures the packer in position using hydraulic hold-down pistons and a body lock ring, preventing unwanted movement due to pressure fluctuations or tubing expansion. Themechanically locked setting force ensures that reductions in bottom-hole pressure or tubing contraction do not weaken the seal, providing long-term reliability in production, injection, and zonal isolation applications. With the 7” and 9 5/8” options, the HP-1 is well-suited for high-flow rate completions, offering exceptional sealing performance and operational efficiency in larger casing sizes.

To retrieve the packer, operators can apply a straight upward pull, or, if equipped with the optional right-hand rotational release, use torque combined with a shear release mechanism. This flexibility allows for efficient removal in both standard and deviated wells, making the HP-1 packer a versatile, high-capacity solution for a wide range of completion designs, including large-bore well systems requiring robust isolation and retrieval capabilities.

View Details

Lead Impression Block

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 15.5-20 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Solar Charge Controller

All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue View Details

Bailer Sampling

InWaTec Combined: Streamlining Wellbore Clarity with Premier Sample Bailer Services In the ever-evolving landscape of drilling and production, the importance of maintaining a clean wellbore is paramount. At InWaTec Combined, we understand that the efficiency of your operations hinges on the clarity of the wellbore. That's why we offer comprehensive Sample Bailer running services, designed to support operations on drilling rigs, during workover operations, and in production wells, whether onshore or offshore. Optimizing Wellbore Integrity with Bailing Operations Bailing operations are a critical component of wellbore maintenance, aimed at collecting solids and cleaning the wellbore to ensure uninterrupted operations. InWaTec Combined's Sample Bailer services are tailored to meet the needs of any operation, providing a thorough cleansing of the wellbore and collection of solids that could otherwise impede production or damage equipment. Adaptable Services for Diverse Environments Whether it's the dynamic environment of offshore rigs or the structured demands of onshore wells, InWaTec Combined's Sample Bailer services are adaptable to any setting. Our equipment and expertise are suited to the unique challenges presented by both drilling and production phases, ensuring that we provide optimal solutions regardless of the environment. Leveraging Technology for Efficient Operations At InWaTec Combined, we utilize the latest technology in our Sample Bailer running services. This approach allows us to efficiently collect wellbore debris and samples, minimizing downtime and maximizing the productivity of the well. Our commitment to technological advancement means that we continuously improve our services to stay at the forefront of the industry. Safety and Environmental Stewardship We prioritize safety and environmental stewardship in all our operations. Our Sample Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of eco-friendly operations, especially in sensitive onshore and offshore locations. InWaTec Combined’s Commitment to Excellence Choosing InWaTec Combined for your bailing needs means partnering with a company that is committed to excellence. Our Sample Bailer running services are designed to deliver results with precision, safety, and environmental responsibility at the forefront. We are dedicated to providing services that not only meet but exceed industry standards. Conclusion: Your Clear Choice for Clear Wells In summary, InWaTec Combined’s Sample Bailer running services represent the highest standard in wellbore cleaning and sample collection. With our advanced technology, adaptable services, and unwavering commitment to safety and the environment, we are your clear choice for ensuring the integrity and productivity of your wells. Trust InWaTec Combined to deliver clarity and quality to your wellbore operations. View Details

ROV Remote Operated Vehicle for subsea and dive activities

ROV's are underwater machines that can be used to explore ocean depths while being operated remotely by someone at the waters surface by means of an umbilical. Remote operated vehicles provide high quality images and video of subsea infrastructure and can be used to manipulate valves and tools to operate and maintain oil and gas infrastructure. ROV's are used in a wide range of industrial applications and marine research activities without the challenges experienced by human divers. View Details

Multi-Process 5001 All-in-One Welder

Canaweld: Your All-In-One Solution for Oil and Gas Welding When it comes to welding machines and accessories for the oil and gas industry, Canaweld stands out as a leading expert. Our multi-process welding machines are designed to cater to all your welding needs, providing a comprehensive range of capabilities to handle various welding processes with ease. From MIG welding to TIG welding, Stick welding to Flux Cored welding, our multi-process welders are the ultimate all-in-one solution for your welding projects. Unmatched Variety, Unbeatable Quality At Canaweld, we take pride in offering a wide range of multi-process welders to meet the diverse needs of the oil and gas industry. Our production lines include industrial heavy-duty multi-process welders, high-tech (programmable, LCD panel, Synergic, or pulse) multi-process welders, and portable multi-process welders. Whatever your welding requirements, we have the perfect welding machine to match your needs. Versatility to Handle Various Materials Our multi-process welders are engineered to tackle a wide range of materials commonly used in the oil and gas industry. From mild steel and stainless steel to aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys, our machines are equipped to handle it all. Professional-Grade Wire-Feeding Mechanisms We understand that a robust and reliable wire-feeding mechanism is crucial for seamless welding operations. That's why all our multi-process welders are equipped with professional, heavy-duty wire-feeding mechanisms to ensure smooth and consistent wire feed, reducing downtime and improving efficiency. Introducing the Multiprocess 5000: The Workhorse for Medium to Heavy-Duty Applications The Multiprocess 5000 is a powerful 400-Amps welding machine that takes welding to a whole new level. Capable of Stick welding, MIG welding, Flux cored welding, or TIG welding with a lift start, this robust and reliable workhorse is the perfect companion for all your medium to heavy-duty applications. Engineered for Tough Conditions Designed to withstand the harshest conditions, the Multiprocess 5000 is a true workhorse. Its heavy-duty, robust design ensures reliability, making it a dependable partner in the most demanding environments. Unparalleled Performance With high power at 100% duty cycle and tested in extreme temperatures of 104°F/40°C and 140°F/60°C, the Multiprocess 5000 delivers exceptional welding quality, precise arc striking, and a highly stable arc. Its fully encapsulated PCB protects against dust contamination, ensuring continuous performance even in challenging conditions. Optimal Welding Control The Multiprocess 5000 features automatic compensation for main power fluctuations within ± 20% and electronic continuous control of inductance, ensuring trouble-free welding and excellent CC/CV characteristics. Whether you're engaging in MIG/MAG, Flux-cored, or Stick welding (MMA), this machine offers exceptional welding characteristics. User-Friendly and Worry-Free Setting parameters is a breeze with the Multiprocess 5000's user-friendly design. It includes initial and final crater control for precise welding results and comes with a comprehensive 3-year warranty, giving you peace of mind and confidence in your investment. Choose Canaweld: Your Trusted Welding Partner Experience the power, versatility, and reliability of Canaweld's multi-process welding machines. From the oil and gas industry to various industrial applications, our welding solutions have been trusted by professionals worldwide. When it comes to welding machines and accessories, Canaweld is the name you can trust. Unlock the potential of your welding projects with Canaweld's cutting-edge technology and exceptional performance. Invest in a welding machine that delivers superior results and choose Canaweld for all your welding needs. View Details

9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 47-53.5 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Gauge Root Valve – Male x Female – 1/4” NPT – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female 1/4” NPT is designed to provide reliable isolation and control for pressure measurement instruments in chemical, petrochemical, and oil and gas applications. It allows a secure connection between the process line and pressure gauges, ensuring accurate readings while preventing backflow and leakage. This size is commonly used where compact instrumentation connections are needed, offering precise control in tight piping configurations.

The valve is constructed and tested according to ASME B16.34 for pressure and temperature ratings and complies with ISO 9001, PED, and ATEX standards, confirming quality and suitability for use in hazardous or pressurized environments. It has a standard working pressure of 6000 PSI, with higher pressures available upon request. The metal-to-metal body and bonnet seal ensures high-pressure and temperature performance, and the self-centering, non-rotating stem tip provides consistent shutoff for leak-free operation.

Additional design features include a simple, adjustable gland retainer for stable packing, a back seat for added security, a removable T-handle for low torque operation, and a dust cap to protect the stem from contamination. All valves are 100% factory tested for seat and packing leakage using nitrogen gas at 1000 PSI, ensuring reliable performance. This valve is ideal for isolating and protecting pressure measurement instruments.

View Details

Flare Gas Capture

Unlock Value from Flare Gas with Lovat Gas Solutions Flare gas, often associated with oil production, holds tremendous potential for conservation and revenue generation. At Lovat Gas Solutions, we specialize in flare gas capture and can help your company devise a comprehensive plan to conserve this valuable resource and turn it into a source of revenue. In many jurisdictions, energy regulators require producers to conserve associated gas to enable oil production. If your company has oil wells or fields that are shut in due to excess gas production, we are here to assist you. Our team of experts will work closely with you to develop a conservation and revenue plan that aligns with your company's objectives. Why choose Lovat Gas Solutions for your flare gas capture needs? 1. Expertise in Flare Gas Capture: Our team possesses deep expertise and knowledge in flare gas capture. We understand the unique challenges associated with capturing and monetizing this resource. With our experience and technical know-how, we can help you devise an effective plan to conserve flare gas and unlock its value. 2. Compliance with Energy Regulations: We stay up-to-date with the latest regulations and requirements set forth by energy regulators. Our solutions are designed to help you meet regulatory obligations while optimizing the use of flare gas to enhance your operations and revenue streams. 3. Conservation and Revenue Generation: Lovat Gas Solutions is dedicated to helping you turn flare gas into a valuable asset. By capturing and conserving flare gas, we can develop a plan that not only helps you meet regulatory standards but also generates revenue for your company. 4. Tailored Solutions: We recognize that every oil well or field is unique, and so are the requirements for flare gas capture. Our team will work closely with you to understand your specific circumstances and develop a customized plan that maximizes the potential of your flare gas while aligning with your business goals. By partnering with Lovat Gas Solutions, you can: • Conserve valuable resources by capturing flare gas • Comply with energy regulations and demonstrate environmental responsibility • Generate additional revenue streams from previously wasted gas • Enhance the sustainability and profitability of your operations Contact us today to discuss your flare gas capture needs. Our team of experts is ready to collaborate with you to devise a conservation and revenue plan that suits your company's requirements. With Lovat Gas Solutions as your trusted partner, you can unlock the full potential of flare gas and maximize the value of your operations. View Details

CSA 36 unit Locking FAST charger rack

Enhance Charging Security and Efficiency with the CSA 36 Unit Locking FAST Charger Rack from Provix Provix is proud to offer the CSA 36 Unit Locking FAST Charger Rack (Part # NWI-NWCR-36BLC), an advanced charging solution designed to cater to the needs of mining, construction, and industrial professionals. This charger rack is an ideal blend of speed, security, and capacity, perfect for medium to large-scale operations. Swift Charging for Continuous Operations The CSA 36 Unit Charger Rack is engineered for quick and efficient charging, reducing downtime to a minimum. It boasts a charging time of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This rapid charging capability ensures your team's equipment is promptly ready for use, enhancing overall productivity. Secure Locking Mechanism for Added Safety With its locking feature, the CSA 36 Unit Charger Rack provides an extra layer of security, safeguarding your valuable equipment during charging. This is especially crucial in environments where the risk of theft or tampering is a concern. The locking mechanism ensures that the equipment remains secure, offering peace of mind and improved safety in the workplace. Space-Efficient Design for Organized Workspaces Despite its capacity to charge 36 units, this charger rack is designed with space efficiency in mind. Its compact form factor makes it an excellent fit for equipment rooms and charging stations where space is at a premium, helping maintain an organized and clutter-free environment. Durable Construction for Industrial Environments Built to withstand the harsh conditions typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust construction ensures it can endure daily wear and tear, offering long-term, dependable performance. Ideal for Varied Operational Needs Whether you’re managing a mining operation, a construction site, or an industrial facility, the CSA 36 Unit Locking FAST Charger Rack is an excellent choice. It accommodates a considerable number of units, making it suitable for operations that require efficient and secure charging solutions. Upgrade Your Charging Setup with Provix Invest in the Wisdom CSA 36 Unit Locking FAST Charger Rack to streamline your charging processes and enhance the security of your equipment. Visit Provix at www.provix.net to learn more about this high-capacity, secure charging solution and explore our range of specialized mining equipment. View Details

Premier Production Packer with Striker

The Premier™ Packer with Striker™ interventionless packer setting system is a proven product for interventionless actuation of the Premier packer. It is the new class of “removable” packers designed for wells that demand the sealing performance of a permanent packer and the flexible workover options of a traditional retrievable packer. Because the Premier can be remotely actuated, rig time/cost is reduced and risks associated with standard well intervention setting methods, are minimized. This results in a cost-savings benefit for the operator. The Striker system is a device that generates packer setting force from hydrostatic well pressure. As a secondary or contingent setting method, it can also be set by hydraulic pressure. The Striker modular design is a derivation of the innovative and successful SB- 3H™ hydrostatic/hydraulic retainer production packer. It can be removed on the production string by cutting the mandrel with a chemical or mechanical cutting tool. The Premier system offers unique high-performance and multiple-removal options for high-cost intervention completions. We can source from current stock or direct from the manufacturer. View Details

Remote Operated Vehicle (ROV) Training Courses

Dive into the Depths: Introducing Subsea ROV Training Courses We believe that the true potential of subsea exploration lies in the hands of skilled professionals. That's why we are excited to announce our comprehensive Subsea ROV Training Courses, designed to equip aspiring ROV operators and seasoned professionals alike with the knowledge and expertise needed to master the art of underwater robotics. Unleash Your Subsea Potential Subsea robotics and Remote Operated Vehicles (ROVs) are revolutionizing the way we explore and interact with the underwater world. Our ROV training courses are crafted to empower individuals with the skills required to navigate ROVs with precision and confidence, ensuring safe and efficient operations beneath the waves. Experience and Expertise The instructors have worked on diverse projects worldwide, ranging from offshore oil and gas installations to scientific research and environmental surveys. Comprehensive Curriculum Our Subsea ROV Training Courses cover a wide range of topics, catering to both beginners and advanced learners. From the fundamentals of ROV piloting and navigation to advanced techniques, troubleshooting, and maintenance, our courses leave no stone unturned in providing a well-rounded education in subsea robotics. Hands-On Learning We understand that practical experience is the key to mastering ROV operations. That's why our training courses feature hands-on learning opportunities with our cutting-edge ROV systems. Participants get to operate ROVs in simulated real-world scenarios, honing their skills under the guidance of our seasoned instructors. Tailored to Your Needs Whether you are an individual looking to kickstart your career in subsea robotics or a company seeking to train your ROV operators, our courses can be tailored to meet your specific needs. We offer both individual and group training options, ensuring that you get the most out of your learning experience. A Gateway to New Opportunities Completing our Subsea ROV Training Courses opens the door to exciting career opportunities in the subsea industry. As the demand for skilled ROV operators continues to grow, our certified graduates are well-prepared to embark on rewarding careers in offshore exploration, marine research, salvage operations, and more. Join the Academy Are you ready to dive into the depths of subsea robotics and ROV operations? Join the Academy and unlock the potential of underwater exploration. Our Subsea ROV Training Courses provide the knowledge, skills, and confidence you need to excel in the world of subsea robotics. Invest in Your Future Invest in your future and become a part of the cutting-edge subsea robotics industry. Contact us today to learn more about our Subsea ROV Training Courses and take the first step toward a fulfilling and adventurous career beneath the waves. The subsea world awaits your exploration! View Details

NWB-20 Charger

Power Up Your Mining Gear with the Wisdom NWB-20 Charger from Provix Provix is excited to present the Wisdom NWB-20 Charger, a high-efficiency portable charger that is a game-changer for mining professionals. Tailored to meet the demanding needs of the mining industry, this charger offers reliable, fast, and efficient charging for your equipment. Versatile and Efficient Charging Solution The NWB-20 Charger features a wide-ranging AC input of AC 100-240 V ± 10%, 0.24 A, 50-60 Hz, making it suitable for global use. Additionally, its DC input of 7~30 V, 1.7 A, adds to its versatility, allowing it to adapt to various power sources. Optimized for Wisdom Mining Lamps Designed to complement Wisdom's line of mining lamps, the NWB-20 provides a maximum DC output voltage of 4.20 ± 0.05 V and a DC output current of 2000 mA ± 100 mA. It ensures efficient charging times of 6.5 hours for the KL8M and 4.5-6.5 hours for the KL5M, reducing downtime and increasing productivity in mining operations. Compact, Lightweight, and Portable The NWB-20 Charger is designed for portability and ease of use. It measures 116 x 76 x 56 mm (4.6 x 3.0 x 2.2 in) and weighs only 215 g (7.58 oz), making it easy to carry and store. This compact design is ideal for miners who need a reliable charging solution on the go. Reliable and Durable Charging Accessory This charger is not just about power; it's about durability and reliability. Its robust construction ensures it can withstand the harsh conditions often found in mining environments, providing consistent performance over time. Get the NWB-20 Charger Today Upgrade your mining equipment with the Wisdom NWB-20 Charger for a more efficient, reliable, and portable charging solution. Visit Provix to learn more about how this charger can benefit your mining operations. Explore our products at www.provix.net or contact our team for detailed information. View Details

Lock Mandrels for Landing Nipples

Enhancing Downhole Operations with HOCA Oil Tools' Lock Mandrels for Landing Nipples In the intricate landscape of oilfield operations, achieving peak efficiency and maintaining well integrity are of utmost importance. HOCA Oil Tools, a leader in downhole slick line tools, introduces its Lock Mandrels for Landing Nipples, designed to meet these challenges head-on. These Lock Mandrels are crafted for precision, reliability, and durability, ensuring they meet the diverse needs of modern downhole activities. HOCA's Lock Mandrels for Landing Nipples: Tailored for Excellence Our Lock Mandrels are engineered to be set into pre-positioned landing nipples within the wellbore, providing a secure and reliable platform for the deployment of various downhole tools and instruments. Available in multiple types such as 'ROTR', 'ROTRN', 'ROTX', and 'ROTXN', our Lock Mandrels cater to a wide range of downhole conditions and operational requirements. They can be selected based on the specific flow control accessory attached, making them either Selective or No-Go types to suit different operational strategies. Experience the HOCA Oil Tools Difference By integrating HOCA Oil Tools’ Lock Mandrels into your downhole toolkit, you're choosing a product backed by our commitment to quality, innovation, and customer service. These mandrels are not just tools but solutions designed to enhance the efficiency and safety of your downhole operations. Our Lock Mandrels for Landing Nipples represent the intersection of innovation and practicality, providing the reliability and performance essential for today's oilfield challenges. Choose HOCA Oil Tools for your downhole needs and experience the difference that quality and expertise can make in your operations. Embrace the future of downhole operations with HOCA Oil Tools, where technology meets tradition to drive success in the oil and gas industry. View Details

Perforating

Optimizing Reservoir Connectivity with InWaTec Combined's Precision Perforating Services In the intricate execution of oil and gas production, establishing a seamless flow path between the reservoir and the wellbore is vital for optimal extraction. At InWaTec Combined, we specialize in precision Perforating Services, a critical step towards ensuring that our clients’ wells are prolific producers. Perforating is a sophisticated process, and its execution is both an art and a science. It involves the precise creation of holes from the wellbore through the casing and cement sheath directly into the producing zone. This process is not merely about making openings; it's about strategically placing them to maximize flow rates and enhance the recovery of hydrocarbons. Our approach to perforating is methodical and tailored. We begin with an in-depth analysis of the well conditions and reservoir characteristics. This data informs our selection of perforating techniques, which range from the conventional to the cutting-edge, including shaped charges and advanced explosive materials that create clean, deep perforations with minimal damage to the formation. InWaTec Combined’s Perforating Services are about more than just punching holes; they are about delivering a highly controlled and effective conduit for hydrocarbons to travel from the reservoir to the surface. With our state-of-the-art technology and expertly engineered charges, we can ensure that the flow path is not just established, but optimized for the specific conditions of each well. Safety and precision are at the heart of our operations. We employ the latest in downhole technology, including real-time monitoring and electric line conveyance, to ensure that our perforations are executed with the highest degree of accuracy and control. This commitment to excellence and attention to detail is why InWaTec Combined is a leader in the field. By entrusting InWaTec Combined with your perforating needs, you are not just choosing a service provider—you are choosing a partner dedicated to enhancing the productivity of your wells. Our Perforating Services are integral to preparing your wellbore to be a strong link between the hidden riches of the reservoir and the energy needs of the world. Let us bring our expertise and precision to bear on your operations, and together, we can unlock the full potential of your assets. View Details

Professional Hand Controller

Gauge Root Valve – Male x Female – Lagging Extension – 1/4”, 1/2”, 3/4” – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female with Lagging Extension is designed for controlling and isolating pressure instruments on pipelines where insulation is applied. The lagging extension allows the valve handle to extend above the insulation, ensuring operators can access and operate the valve safely without removing or damaging the insulation. This design maintains the integrity of the insulated pipeline while providing reliable valve operation.

The valve is manufactured to ASME B16.34 standards and meets ISO 9001, PED, and ATEX requirements, ensuring quality and compliance for industrial and oil and gas applications. It is rated for a standard working pressure of 6000 PSI and can be supplied for higher pressures upon request. The temperature range of the valve spans from -50°C to 230°C, with higher temperature options available with graphite sealing. A metal-to-metal body bonnet seal provides high-pressure and high-temperature sealing without the need for O-rings.

The valve features a back-seated stem for added security, a self-centering non-rotating tip for consistent shutoff, and a simple adjustable gland retainer for stable packing. The rolled stem threads and mirror-finished stem through the packing allow smooth operation, reduce packing wear, and provide long-lasting performance. The removable “T” handle and dust cap on the stem further enhance ease of use and protection.

This valve is particularly suitable for applications where pipelines are insulated, allowing for accurate gauge measurement, safe operation, and minimal disruption to insulation.

View Details

6 5/8" HP-5 Hydraulic Set Production Packer 20-24 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details