Ballycatter.ca - Industrial Equipment

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 20-24 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Tubing Inspection

Ensuring Production Integrity with InWaTec Combined's E-Line Tubing Inspection Services In the lifecycle of oil and gas wells, tubing integrity is fundamental to ensuring consistent production and operational safety. At InWaTec Combined, we offer specialized E-Line Tubing Inspection Services to preemptively identify and mitigate risks associated with tubing failure, utilizing state-of-the-art diagnostic techniques to safeguard your assets. Tubing failures, which can stem from deformation, physical wear, or corrosion, pose a significant threat to well integrity and production. Our advanced inspection services are designed to detect these issues early, enabling timely interventions that maintain continuous well performance. Our comprehensive suite of E-Line Tubing Inspection Services includes: Cased-Hole Calipers: These tools provide precise measurements of the internal diameter of tubing, detecting anomalies and changes that could indicate deformation or wear. Flux-Leakage Tools: Specialized for identifying defects in ferrous tubulars, these tools locate areas of metal loss or corrosion by detecting disruptions in magnetic flux. Electromagnetic Phase-Shift Tools: By measuring the changes in electromagnetic fields, these tools can effectively pinpoint areas of wall thickness changes due to corrosion or wear. Ultrasonic Tools: Employing high-frequency sound waves, these tools are adept at measuring tubing wall thickness, identifying areas at risk of thinning, which could lead to potential collapse. In addition to these, our E-Line Tubing Inspection Services also employ ultrasonic radial-cement-evaluation and modified openhole-imaging devices, which are particularly effective in assessing the condition of the tubing for signs of internal or external metal loss—a crucial step in preventing unexpected well shut-ins. At InWaTec Combined, we understand that the stakes are high when it comes to maintaining well integrity. Our E-Line Tubing Inspection Services are not just about identifying problems; they're about delivering peace of mind. By utilizing our advanced diagnostic tools, operators can rest assured that the integrity of their production tubing is being monitored with the utmost precision, allowing them to focus on maximizing output and efficiency. Choosing InWaTec Combined means partnering with a company that places a premium on innovation, safety, and reliability. Our commitment to excellence ensures that your operations benefit from the latest in inspection technology, delivered by a team of seasoned professionals. Trust us to provide the insights you need to keep your wells flowing safely and smoothly, today and into the future. View Details

Needle Valves Mini Needle Valve Series – Male x Female – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Mini Needle Valve Series – Male x Female is designed for accurate and reliable flow control in small or compact piping systems. Its male-to-female connections allow easy integration into existing instrumentation or process lines. The valve ensures bubble-tight shut-off, preventing leaks in sensitive applications.

The rolled stem threads provide smooth operation, strength, and long service life, while the mirror-finished stem reduces friction, extends packing life, and ensures consistent performance. Packing located below the stem threads prevents lubricant washout, protects against corrosion, and keeps solids from entering the thread area, which could cause damage.

With low operating torque, these valves are easy to operate even in tight spaces. Optional panel-mount versions allow installation in control panels or instrument assemblies, making them ideal for oil and gas, chemical, and other industrial applications where precise flow control is essential.

View Details

Oil Only Absorbent Pad

Quick Absorbent Pads stand as a reliable and efficient solution for liquid cleanup, offering a combination of rapid absorption, fine-fiber construction, oil-specific capabilities, durability, and enhanced visibility. Upgrade your cleanup processes with a product designed to keep surfaces dry and operations running. Choosing the right solution for your needs is crucial, and our Quick Absorbent Pads offer several advantages that set them apart from other options. Why should you use the absorbent pads? Absorbent pads are specifically designed for rapid absorption of leaks, spills, and overspray. The quick response time is crucial in preventing the spread of liquids and minimizing potential hazards. If time efficiency is a priority, our absorbent pads are a superior choice. Unlike some general-purpose absorbents, our pads are engineered for the selective absorption of oils and oil-based liquids. This targeted approach ensures maximum effectiveness in scenarios where oil contamination is a primary concern. If your application involves oil cleanup, our pads offer a specialized solution. The fine-fiber construction of our absorbent pads ensures a clean and residue-free surface after cleanup. This is a significant advantage over some absorbents that may leave behind liquid or fiber remnants. If you value a thorough and residue-free cleanup, our absorbent pads are the ideal choice. absorbent pads feature a durable multi-layer polypropylene fiber structure, making them tough and resistant to tearing. This robust construction ensures longevity and reliability, even in demanding industrial environments. If durability and tear resistance are priorities, our absorbent pads excel in these aspects. The oil-specific absorption feature of our pads means they do not absorb water. This specificity is crucial in scenarios where water contamination is not desired. If you require an absorbent that selectively targets oils without absorbing water, our pads provide a distinct advantage. The bright white color of our absorbent pads enhances visibility during cleanup operations. This makes it easier to monitor the saturation level and determine when replacement is needed. If visibility and ease of use are important considerations, our pads offer a practical solution. Quick Absorbent Pads are versatile and suitable for a wide range of industries and applications. Whether you're in manufacturing, automotive, or any other sector with liquid spill concerns, our pads offer a reliable and efficient solution. In short: Oil Only Absorbent Pad - Absorbs up to 0.3 L (0.07 gal), absorbs rapidly, selective absorption of oils and oil-based liquids with maximum effectiveness, No residue or fiber left behind, the absorbent pad has durable multi-layer construction, oil-selective without absorbing water, bright white color for visibility, versatility across industries. Technical Specs Part Number: OH-P811 Product Type: Absorbent Pad Fluids Absorbed: Oil Based Liquids Volume Absorbed per unit: 17.5 oz Colour/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Volume Absorbed per pkg.: 5.2 liter Floating: Yes UV Resistant: No Size: 8” x 11.5” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes View Details

Geotechnical exploration rig

Geotechnical drilling is a method of investigating subsurface soils to provide data for engineering design prior to construction of buildings, dams, roadways and other infrastructure sites. The low impact and maneuverability of the geotechnical drilling rigs allow for free movement on geotechnical investigation sites with limited access, such as next to foundations, inside buildings, or under power lines. Use the centerline head side shift on our geotechnical drill rigs to simplify traditional geotech techniques such as: Augering Mud rotary SPT Shelby tubes Hard rock cores CPT View Details

7" Mech-2 Double Grip Mechanical Set Packer for 38 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Monoflange DBB Double Block & Bleed Valve – Flange x Thread – Needle Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange DBB Double Block and Bleed Valve with Needle-Needle-Needle configuration is designed to provide dual isolation and safe venting in oil and gas, chemical, and process systems. Both isolation points use needle valves, allowing precise control of flow and pressure in the cavity between the two isolation points, which minimizes leakage and ensures accurate venting. This configuration is particularly suited for instrument and gauge isolation, chemical injection, and sampling applications, where fine control and safety are critical.

The monoflange design integrates the two isolation valves and the bleed into a single compact body. This eliminates the need to bolt together separate valves, reducing the number of joints, potential leak paths, and overall weight, while saving installation space and simplifying maintenance. The valve can accommodate flange sizes from 1/2” to 2” and is rated for Class 150 to Class 2500, making it suitable for a wide range of high-pressure applications.

Manufactured to recognized industry standards including ASME B16.34, API 6D, and ISO 17292, the valve is available in a variety of materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional NACE MR-0-175 compliant materials are available for corrosive environments. In-built vent valves and low emission testing ensure the valve meets stringent safety and environmental requirements, providing a reliable solution for critical fluid control applications.

View Details

Maintenance Dolly for LM2500 Gas Turbine

The Maintenance Dolly for LM2500 gas turbines is designed to fit the size and weight of LM2500 components, making it easier and safer to handle heavy parts during maintenance.

Key features:

Double wheels for smooth pressure distribution and easier movement
Wheels with directional locking for better control and stability
Non-slip surfaces to enhance worker safety
Foldable steps for convenient access
Storage space for tools and parts on-site
Incorporated lifting brackets for safe and easy lifting
Compatible with forklifts for flexible handling
Corrosion-resistant coating for durability in tough environments

This dolly supports safer and more efficient maintenance of LM2500 turbines by improving mobility, stability, and accessibility.

View Details

Long Haul Link Repairs

Unveiling Nulux's Robust Solution for Maintaining the Lifeblood of Your Operations: Long Haul Link Repairs In the vigorous and demanding milieu of the Oil and Gas industry, the stakes are astronomically high and the margin for error is strikingly slender. Here, communication is more than just a transfer of data; it’s the unerring lifeline that ensures smooth, synchronized, and secure operations. Introducing Nulux Network Solutions' pivotal service in the realm of Long Haul Link Repairs, ensuring that the veins of communication within your expansive operations remain unimpeded and robust, even in the face of unpredicted adversities. Embarking on a Journey of Resilient Connectivity Nulux Network Solutions, a harbinger of stellar products, solutions, and services throughout the entire energy value chain, strides with a commitment of not only delivering unparalleled network solutions but also aiding our customers in forging a path toward a more sustainable future. Long haul fiber optic links, spanning vast terrains, often traversing through some of the most inhospitable environments, form the critical backbone of communication networks in the Oil and Gas industry. Their impeccable functioning is non-negotiable, ensuring that every fragment of data from remote operational sites is conveyed precisely, securely, and without latency to where it is indispensably required. Nulux’s Long Haul Link Repair: A Vigilant Guardian of Your Communication Networks Our long haul link repair service is not merely a reactive solution to the unexpected impediments that might assail your fiber optic communications but a strategic, anticipatory shield that ensures your operations remain perpetually connected and resilient. In electing Nulux’s Long Haul Link Repair Service, you fortify your operations with: Proactive Vigilance: Monitoring and maintaining the integrity of your long haul links to predict and preemptively address potential issues before they escalate into critical failures. Rapid Response and Resolution: Ensuring that, in the event of disruptions, our team mobilizes with expeditious proficiency to diagnose, locate, and repair faults, reinstating the vitality of your communication backbone. End-to-End Expertise: Nulux’s veteran technicians, equipped with over two decades of combined experience and nuanced understanding of the challenges peculiar to the oil and gas sector, facilitate meticulous, rapid, and robust repair solutions. Comprehensive Aftercare: Post-repair, we ensure your links are not merely restored but optimized, and provide comprehensive reports and aftercare to preclude future occurrences and enhance overall network performance. Steadfast Communications with Nulux Your long haul links do more than just convey data; they ensure the heartbeat of your operations remains rhythmic and unerring. Nulux stands as a sentinel, ensuring these critical lifelines are perpetually robust, secure, and operational, safeguarding not merely your data but the seamless synchronicity of your extensive operations. Engage with Nulux Network Solutions, and let’s construct a future where your communications are not merely sustained but are resilient, where every byte of data traverses through your networks with unerring precision, and where every long haul link is more than a conduit, but a steadfast, unbreakable bond that perpetuates your operational excellence. View Details

BMS Versol B

Introducing BMS VerSol B: The Perfect Replacement for Harmful Chemicals Cleanstream is proud to present BMS VerSol B, an environmentally friendly alternative to standard solvents like D-Limonene, Dearomatized hydrocarbons, and Perchloroethylene. We understand the negative impact that harmful chemicals have on our planet and that's why we have developed a product that is not only effective but also safer for the environment. With BMS VerSol B, you can say goodbye to traditional solvents and hello to a more sustainable future. BMS VerSol B is a chemical product that provides a more environmentally conscious alternative to D-Limonene. It's a perfect replacement for all your solvent needs, providing exceptional cleaning performance without the environmental hazards of traditional solvents. Whether you're a small business owner or a large industrial company, BMS VerSol B is the right choice for you. By choosing our product, you're taking a step towards reducing your costs and making a positive impact on the environment. At Cleanstream, we are committed to creating a sustainable future, and we believe that BMS VerSol B is just one of the many ways we can contribute to a cleaner, greener planet. So what are you waiting for? Make the switch to BMS VerSol B today and experience the benefits of a safer, more eco-friendly solvent. Contact us to learn more about how you can get started with BMS VerSol B. View Details

7 5/8" HP-6 Hydraulic Set High Angle Production Packer for 33.7-39 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Tubing Swage

Unlock Efficiency in Oilfield Operations with HOCA Oil Tools’ Tubing Swages In the dynamic world of oilfield services, precision and reliability are non-negotiable. At HOCA Oil Tools, we understand the critical nature of downhole operations. That’s why we're proud to present our premium Tubing Swages – Type A and Type C – designed to meet and exceed the challenging demands of downhole slick line tools applications. Revolutionize Downhole Challenges with Tubing Swages Our Tubing Swages are engineered for excellence, ensuring your downhole operations are seamless and efficient. The Type A and Type C Tubing Swages are crafted with the highest quality materials, ensuring durability and long-lasting performance in the harshest environments. Type A Tubing Swage: This variant is meticulously designed to re-expand constricted tubing, ensuring a free passage for wireline tools and sub-surface controls. Its tapered ends facilitate easy navigation through tubing, while the central hole and lateral ports allow fluid bypass, optimizing performance. Type C Tubing Swage: Building on the features of Type A, the Type C Tubing Swage includes an additional box connection at the bottom, enhancing its functionality and application range. This feature ensures greater versatility, meeting diverse operational needs with ease. Six Benefits of Using HOCA’s Tubing Swages: Enhanced Productivity: By rectifying constrictions in the tubing, our swages ensure smooth operations, significantly reducing downtime and boosting productivity. Versatility: Available in various sizes, the Tubing Swages cater to a wide range of tubing diameters, ensuring the right fit for your specific operational needs. Durability: Crafted with high-quality materials, our swages withstand the challenging downhole environment, offering long-term reliability and reducing the need for frequent replacements. Efficient Design: The tapered design and fluid bypass capability ensure minimal resistance during operations, enhancing efficiency and effectiveness. Cost-Effective: By maintaining the integrity of your downhole tools and minimizing operational delays, our Tubing Swages prove to be a cost-effective solution in the long run. Safety: Designed with safety in mind, our swages help prevent accidents and equipment damage, ensuring a safer working environment. Transform Your Operations with HOCA Oil Tools At HOCA Oil Tools, we're committed to providing solutions that drive success. Our Tubing Swages are a testament to our commitment to quality, efficiency, and safety. Embrace the change with HOCA’s Tubing Swages and experience unparalleled downhole operational excellence. View Details

Liquified Natural Gas (LNG) Transport and Supply

Lovat Gas Solutions: Your Dependable Partner for LNG Supply When it comes to LNG supply, Lovat Gas Solutions has a proven track record of delivering, no matter the conditions or location. We understand that your business relies on the uninterrupted availability of natural gas, whether you are an industrial user or a utility. That's why we are here to provide you with peace of mind, allowing you to focus on your core business while we take care of your gas supply needs. Our commitment to excellence means that we go above and beyond to ensure the dependability of our LNG supply. We have a deep understanding of the unique challenges and requirements of different industries, and our experienced team is well-equipped to develop a solution that caters to your organization's specific needs. At Lovat Gas Solutions, we offer flexible options for LNG supply to accommodate your business requirements. Whether you need a short-term supply to cover temporary spikes in demand, a long-term solution to support your ongoing operations, or a reliable backup supply to safeguard against unforeseen disruptions, we have you covered. By partnering with us, you can expect: 1. Reliability: We have a proven track record of delivering LNG supply, regardless of the conditions or location. Our robust infrastructure and logistical expertise ensure that your business receives a consistent and dependable supply of natural gas. 2. Expertise: With years of experience in the industry, our team possesses extensive knowledge and understanding of LNG supply. We stay up-to-date with the latest advancements and industry trends to provide you with the best possible solutions. 3. Customized Solutions: We recognize that each organization has unique needs. Our team will work closely with you to understand your specific requirements and develop a tailored LNG supply solution that aligns with your business goals. 4. Peace of Mind: When you partner with Lovat Gas Solutions, you can have peace of mind knowing that your gas supply needs are in capable hands. Our reliable and responsive service ensures that you can focus on your business without worrying about interruptions in your natural gas supply. Don't let the uncertainties of LNG supply hinder your business operations. Contact Lovat Gas Solutions today, and let us develop a dependable short-term, long-term, or backup supply of natural gas that suits your organization's needs. Trust us to deliver, no matter the conditions or location, so you can keep your business running smoothly and efficiently. Get in touch with us now to explore how we can support your gas supply requirements and help your business thrive. View Details

24 unit FAST charger rack

Streamline Your Charging Process with the Wisdom 24 Unit FAST Charger Rack from Provix Provix is proud to introduce the Wisdom 24 Unit FAST Charger Rack, an innovative charging solution designed for the fast-paced demands of the mining industry. This charger rack is a perfect blend of efficiency, capacity, and speed, ensuring your mining equipment is always ready for action. High-Capacity, Fast Charging Technology The Wisdom 24 Unit FAST Charger Rack is equipped with 12+12 ports, capable of charging up to 24 devices simultaneously. This makes it an ideal solution for large mining operations where multiple pieces of equipment need to be charged quickly and efficiently. Optimized Charging Times for Various Models Designed with versatility in mind, this charger rack is compatible with several models of Wisdom mining lamps. It charges the KL5M model in just 3 hours, the KL8M in 5 hours, and the KL12M in 8 hours. These fast charging times are crucial in minimizing downtime and maximizing productivity in mining operations. Ideal for Large-Scale Mining Operations The 24 Unit FAST Charger Rack is specifically designed to cater to large-scale mining operations. Its ability to charge multiple units simultaneously not only saves time but also ensures a consistent workflow, as all necessary equipment can be charged and ready to use when needed. Space-Efficient and Easy to Use Despite its high capacity, the charger rack is designed to be space-efficient, easily fitting into the equipment rooms of mining operations. Its user-friendly design allows for easy plug-in and charge, making it accessible to all members of your team. Enhance Your Operational Efficiency Invest in the Wisdom 24 Unit FAST Charger Rack to keep your mining operations running smoothly without the hassle of staggered charging times. Visit Provix to explore this and other innovative mining solutions. For more information, check out our website at www.provix.net or contact our dedicated support team. View Details

Gas Supply

Reliable Gas Supply Solutions: Your Peace of Mind with Lovat Gas Solutions When you reach out to Lovat Gas Solutions, it's because you have a pressing need for gas. We understand the urgency and importance of resolving this issue promptly and efficiently. That's why we take our job seriously – to provide you with a gas supply solution that not only solves your immediate problem but also ensures a seamless experience without creating further headaches for your business. At Lovat Gas Solutions, we pride ourselves on our ability to develop and execute reliable gas supply solutions tailored to your specific application. We prioritize understanding your unique needs and challenges, working closely with you to devise a solution that effectively and consistently meets your requirements. Why choose Lovat Gas Solutions for your gas supply needs? 1. Customer-Centric Approach: Your satisfaction is our top priority. We listen attentively to your concerns, taking the time to understand the intricacies of your gas supply requirements. Our dedicated team is committed to developing and executing a solution that reliably solves your problem without causing additional complications. 2. Reliability: We recognize the critical importance of reliable gas supply for your business operations. With our extensive industry experience and expertise, we ensure that the gas supply solution we provide is dependable, allowing you to focus on your core business activities with peace of mind. 3. Tailored Solutions: We understand that each application is unique, requiring a customized approach. Our team of experts takes a proactive and innovative approach to develop a solution that precisely addresses your gas supply needs. Our goal is to exceed your expectations and provide you with a solution that seamlessly integrates into your existing operations. 4. Seamless Execution: At Lovat Gas Solutions, we believe in delivering on our promises. With meticulous planning, efficient execution, and attention to detail, we ensure a smooth transition from gas supply issues to reliable operations. Our commitment to your success is reflected in our dedication to providing a hassle-free experience. When you choose Lovat Gas Solutions, you choose a partner that takes your gas supply needs seriously. We are dedicated to solving your gas supply challenges without creating further headaches for your business. Contact us today, and let our experienced team develop and execute a reliable gas supply solution that meets your unique requirements. Experience peace of mind with Lovat Gas Solutions as your trusted gas supply partner. View Details

Subsea Templates Fabricated and Installed

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

High-Performance 7" Surface-Controlled Subsurface Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 7-inch Subsurface Controlled Surface Safety Valve (SCSSSV) is a critical safety device designed to automatically shut in a well if uncontrolled flow occurs due to equipment failure or damage. It is installed in the upper part of the well to quickly isolate the producing zone and prevent uncontrolled release of fluids, ensuring well control in emergency situations.

This valve uses a flapper mechanism and is surface-controlled, meaning it can be operated from the surface. It features a self-equalizing design that reduces pressure differences across the valve during opening and closing, which improves reliability and extends valve life. The sealing surfaces are located outside the flow path when the valve is open, reducing wear and protecting key components from erosion.

Because the valve is wireline retrievable, it can be serviced or repaired without pulling the entire tubing string, minimizing downtime and intervention costs. It fits 7-inch tubing and is available with landing nipple seal bores of 5.750", 5.875", or 5.963". It can handle working pressures up to 10,000 psi and offers valve internal diameters of 3.38" and 3.50", allowing operators to balance safety and flow requirements effectively.

View Details

Hydraulic cylinder for various industrial applications

A hydraulic cylinder is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end/head-end). View Details

MS-52 Multistage Steam Turbine

Elevate Your Energy Solutions with the Kessels MS-52 Multistage Steam Turbine: Unleash Power, Precision, and Performance In the ever-evolving realm of steam turbine technology, Kessels Steam Turbines stands as a beacon of innovation and excellence. For the oil and gas industry, where power and precision are paramount, our MS-52 Multistage Steam Turbine is the ultimate solution – engineered to surpass expectations and redefine industry standards. Dominating Back Pressure Turbines Back pressure turbines, available in both single-stage and multi-stage configurations, serve as the vital link between boiler units and process steam headers. These turbines are the backbone of industries that demand a copious amount of steam, revolutionizing the utilization of steam and electricity generation. The Art of Efficiency At the heart of the MS-52 Multistage Steam Turbine is the hallmark of back pressure turbines: the straight-back pressure design. This engineering marvel ensures the seamless harnessing of exhaust steam, matching process demands with unparalleled precision. Every unit of electrical power generated is consumed as per the process steam demand, making it a pinnacle of efficiency. Applications Without Limits Our MS-52 turbine is not just a machine; it's a versatile workhorse ready to excel in various applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Take a giant leap towards sustainability by utilizing our turbine to generate electricity. It powers generators with clean and efficient steam energy, reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-52 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are the order of the day. Kessels turbines seamlessly blend the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a steady and reliable steam supply that your operations can depend on. The Kessels Advantage Choosing Kessels Steam Turbines is more than a business decision; it's a choice of a partner committed to your success. Our MS-52 Multistage Steam Turbine embodies our unwavering dedication to innovation, performance, and customer satisfaction. Key Benefits of the MS-52 Multistage Steam Turbine: Unparalleled Efficiency: Maximize steam utilization while minimizing waste. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations. Unmatched Versatility: Adapt effortlessly to changing needs, be it for drive applications or sustainable power generation. A Greener Future: Harness steam power for electricity generation, reducing your environmental impact. Dedicated Support: Our team of experts is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

HP-3 Hydraulic Set High Angle 6 5/8" 28-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

2-1/2 inch Annular Vent and Sleeve

An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue. View Details

Gauge Root Valve Bleed Valve with Vent Screw – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Bleed Valve with Vent Screw is designed for oil and gas applications where controlled pressure release is critical. It is installed on pressure gauges and instrumentation lines to provide a safe and easy way to vent trapped pressure. The vent screw allows operators to gradually release pressure without removing the valve, reducing the risk of sudden pressure surges that could damage equipment or compromise safety.

This valve is rated for 6000 PSI standard working pressure, with higher pressures available on request. It is built to ASME B16.34 standards and produced under ISO 9001, PED, and ATEX quality systems, ensuring reliability and compliance with industry requirements. The design includes a metal-to-metal seal for high-pressure and temperature applications, a durable vent screw that prevents leakage, and easy operation even in confined spaces. Its construction allows for long-term durability and minimal maintenance, providing safe and accurate operation for critical oil and gas instrumentation systems.

View Details

Gauge Cutter

Enhancing Well Integrity with HOCA Oil Tools B.V.'s Slickline Gauge Cutters In the specialized field of oil and gas exploration and production, maintaining well integrity and efficiency is non-negotiable. At HOCA Oil Tools B.V., we are at the forefront of providing innovative solutions that cater to the complex needs of wellbore maintenance. Our comprehensive array of Slickline Gauge Cutters represents our commitment to excellence and precision, designed to tackle diverse challenges within the tubing string. Multi-functional and Versatile Applications: Our Rebco Type ‘A’ Gauge Cutters serve as multi-functional tools indispensable in the upkeep and maintenance of tubing strings. They are meticulously designed for removing paraffin, corrosion, and other foreign materials from the internal surface of the tubing, ensuring unimpeded flow and operational efficiency. The versatility extends to gauging and tagging obstructions, identifying and marking landing nipples, and preparing wells for the safe insertion of sub-surface controls. These applications underscore the critical role our gauge cutters play in well maintenance and diagnostics, emphasizing their value in operational planning and safety. Customizable Sizes for Precise Operations: Understanding the diversity of wellbore sizes and operational requirements, HOCA Oil Tools offers Gauge Cutters ranging from 1 inch to 7 inches in diameter. This extensive range ensures that all operational needs are met, from smaller interventions to large-scale maintenance tasks. Each gauge cutter can be customized to specific operational needs, ensuring that whatever the well condition or requirement, we have the right tool for the job. How to Order and Customization Options: Our ordering process is streamlined to ensure that you receive the gauge cutter that best suits your operational needs. Gauge cutters are ordered by part number, designated by the outer diameter to three decimal places, ensuring precision and compatibility with your specific well conditions. Additionally, we offer customization options for thread and fishing neck lengths, accommodating unique operational requirements and ensuring that our tools integrate seamlessly with your existing equipment. In conclusion, HOCA Oil Tools B.V. remains committed to providing the oil and gas industry with superior quality tools and customer service. Our Slickline Gauge Cutters are a testament to this commitment, offering unparalleled versatility, efficiency, and reliability in wellbore maintenance operations. Choose HOCA Oil Tools for your downhole needs, and experience the difference that quality, innovation, and precision can make in optimizing your well performance View Details

Large Aluminum Jaws for ROV

Introducing Large Aluminum Jaws: Elevating Subsea Search and Rescue Operations We are proud to announce the launch of the latest innovation: the Large Aluminum Jaws. Designed to enhance the performance of the renowned Blue Robotics Newton Subsea Gripper, these jaws are set to revolutionize search and rescue (SAR) applications and beyond. Engineered for Performance The Large Aluminum Jaws have been meticulously engineered to deliver superior performance in grabbing larger objects underwater. Comparing our Aluminum model to the standard jaws, it becomes evident that we have achieved the perfect balance between strength, precision, and functionality. Precision and Durability Crafted from premium quality Aluminum (6061-T6), our jaws boast exceptional strength and durability. The hard anodized black finish further enhances their resilience, making them resilient to the harsh conditions of subsea operations. Precision flanged bushings ensure smooth and reliable operation, enabling operators to accomplish their tasks with confidence. Versatility Redefined While the Large Aluminum Jaws are designed primarily with search and rescue applications in mind, their versatility extends to various other tasks in subsea environments. Whether it's retrieving objects from the depths or handling delicate operations, these jaws offer unmatched adaptability and efficiency. Your Partner in Subsea Excellence Our commitment to providing the highest quality products is matched only by our dedication to unparalleled customer support. We are here to ensure that you make the most of your subsea operations with our cutting-edge solutions. Experience the Future of Subsea Grabbing Unlock a new era of efficiency and precision in search and rescue operations with Large Aluminum Jaws. Whether you are a SAR professional or involved in other subsea applications, these jaws will elevate your performance to new heights. Contact Us Today Contact us today to learn more about our Large Aluminum Jaws and explore how they can transform your subsea operations. Our team of experts is ready to assist you every step of the way. Embrace the future of subsea robotics. View Details

Water Injection Well Flow Control Valve 4.31 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Welder's Cart

Introducing the Canaweld Welder Cart for Single Phase Machines - Your Ultimate Welding Companion! When it comes to welding, having the right equipment at your fingertips is essential. That's why we've designed the Canaweld Welder Cart - a sturdy and reliable cart that will keep your single-phase machines organized and accessible at all times. With its thoughtful features and robust construction, this cart is the perfect addition to your welding setup. Built for Strength and Durability: The Canaweld Welder Cart is crafted with a strong steel construction that ensures it can handle the demands of the oil and gas industry. Its powder coat finish adds an extra layer of protection, making it resistant to wear and tear from daily use. Rest assured, this cart is built to last. Maximum Convenience, Minimum Effort: Moving your welding equipment has never been easier. The front caster wheels on our cart swivel a full 360 degrees, allowing for smooth and effortless turning. No more struggling to maneuver your machines - our cart does the work for you. Ample Storage Space: Organize your welding essentials with ease. The Canaweld Welder Cart features three-tier shelves thoughtfully designed to accommodate all your portable MIG welders, stick welders, plasma cutters, and necessary accessories. Plus, there's enough room for consumables and a gas cylinder, ensuring you have everything you need at your fingertips. Secure Your Equipment: Your safety is our priority. That's why we've equipped the cart with a chain to secure the gas tank firmly in place. Worried about keeping your cables and helmet tidy? The side hook provides a convenient storage solution for them, eliminating clutter and potential hazards. Unbeatable Dimensions: The Canaweld Welder Cart boasts spacious shelf dimensions that perfectly cater to your welding equipment: • Top Shelf: 18 X 11 X 1 inches • Middle Shelf: 15.5 X 11 X 1 inches • Lower Tray: 27.7 X 11.5 X 2 inches • Gas Bottle Space: 10.2 X 11.4 X 2 inches Ultimate Load Capacity: Our cart can handle the weight. With a load capacity of 110 lbs. (50 kg), you can trust that your valuable equipment is safe and secure while on the move. Efficiency Meets Style: The Canaweld Welder Cart is more than just a functional tool - it's a sleek and stylish addition to your welding setup. Its design not only optimizes your workflow but also adds a touch of professionalism to your workspace. Upgrade Your Welding Experience: Say goodbye to the hassle of transporting your welding equipment and embrace the convenience of the Canaweld Welder Cart. It's time to work smarter, not harder. Elevate your welding experience today with Canaweld - your trusted partner in welding solutions. View Details

High Torque Super Spooler Unit

The Super Spooler SUHT-25-2415 is designed for the heaviest of spooling loads in the most adverse conditions. Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Liftboat for water depths up to 150'

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

C-1 Single Grip Invertible Packer

The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. View Details

HP-3 Hydraulic Set High Angle 7" 20-26 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

5" Mech-1 Single Grip Mechanical Set Packer for 15-16 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

LM2500 Fixture, Hinge for Upper Compressor Case

LM2500 Fixture, Hinge – Upper Compressor Case is a specialized tool set designed to safely raise and hinge open the upper compressor case of the LM2500 gas turbine engine. This fixture is essential during major maintenance, inspection, or overhaul activities where access to the engine’s internal compressor components is required.

The fixture allows maintenance teams to lift and securely hold the heavy upper compressor case in a hinged, open position. This provides stable and safe access to the compressor rotor and other internal parts, ensuring technicians can carry out detailed inspections or repairs without risking damage to sensitive components.

Made from strong, durable materials, the fixture set is built to support the heavy upper compressor case while keeping everything properly aligned. Its reliable locking and hinge system holds the case securely in place, helping protect the gas turbine.

Compatible with both OEM and MRO procedures, this fixture supports efficient, repeatable maintenance practices and helps reduce overall engine downtime. Whether used in the field or in a dedicated maintenance facility, the LM2500 Hinge Fixture is a critical tool for safe and effective servicing of the LM2500 engine’s compressor section.

View Details

2-3/8 inch Halliburton WellStar TR-SCSSSV

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog. View Details

Fiber Optic Mechanical Connectors

Navigating Optimal Connectivity with Nulux’s Fiber Optic Mechanical Connectors The Oil and Gas industry is no stranger to the integral role that secure, precise, and reliable connectivity plays in ensuring the smooth execution of its multifaceted operations. Amidst the sprawling expanse of pipes, rigs, and refineries lies a nexus of data, flowing incessantly, safeguarding operational integrity, and facilitating momentous decisions. In the paradigm of fostering such impeccable connectivity, Nulux Network Solutions introduces its exemplary service of deploying Fiber Optic Mechanical Connectors. Connecting More Than Just Fibers A fiber optic connector, though small in stature, plays a monumental role in ensuring that the lifeblood of your operations – your data – traverses through the network with utmost precision and minimal loss. Positioned meticulously at the end of a line, a fiber optic connector becomes the gateway through which connectivity to network devices or other fiber connectors in a patch panel is realized. Mechanical fiber connectors stand as sentinels, guarding the alignment of the cores of fibers, ensuring that the passage of light – and thus your data – is uninterrupted and lossless. The efficacy of these connectors is such that, when adeptly installed, they concede incredibly minimal light due to reflection or misalignment of the fibers. A Panorama of Possibilities with Mechanical Connectors Navigating through the approximately 100 different types of fiber optic connectors that have graced the market, Nulux remains undeterred and proficient in ensuring the selection and installation of the most apt connectors to meet your specific operational needs. Why Nulux’s Fiber Optic Mechanical Connectors? Spectrum-Wide Expertise: Offering products, solutions, and services that span across the entire energy value chain, Nulux’s offerings are not merely solutions but a steadfast commitment to ensuring your operations are perpetually connected and sustainable. Tailored Connectivity Solutions: Every operation in the oil and gas sector is uniquely nuanced. Nulux prides itself on delivering custom, tailored solutions, ensuring that your fiber optic connectors are not just installed but are perfectly aligned with your operational needs. Navigating Towards Sustainability: Our engagement with our customers extends beyond providing solutions. We stand alongside you, steering towards a more sustainable future, ensuring that every connector, every fiber, and every byte of data propels us towards a future that’s not just connected but also environmentally conscious. Lighting the Pathway of Data: Mechanical connectors from Nulux assure that the luminal path your data treads is secure, reliable, and optimal, ensuring that every bit of information reaches its destination as intended. Your Data’s Journey, Secured with Nulux In the nexus of your operations, where data flows with the same criticality as the oil traversing through your pipelines, Nulux Network Solutions stands as a guardian, ensuring that every byte of data reaches its destination securely, reliably, and optimally. Explore with Nulux, the realms of impeccable connectivity, safeguarding your operations with our Fiber Optic Mechanical Connectors, and let’s forge ahead, crafting a future where every connection propels us towards sustainability and operational excellence. Empower your network, ensure your connectivity, and enlighten your future with Nulux. View Details

Double Block & Bleed Valve – Flange x Thread – Ball x Ball with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Double Block and Bleed Valve with Flange x Thread connections and Ball x Ball isolation with Needle Drain is a compact assembly designed to provide dual isolation in oil and gas systems. The two ball valves ensure reliable upstream and downstream shutoff, while the needle drain allows controlled venting, sampling, or pressure release between the isolation points. This design reduces the number of flanged joints and potential leak paths, improving safety and reliability in instrument and process applications.

The valve is available in sizes from ½ inch to 2 inch and pressure classes from 150 to 2500, making it suitable for a wide range of process conditions. It can be manufactured in various materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, and can be supplied to meet NACE MR-01-75 requirements. The assembly is built to recognized standards including ASME B16.34, API 6D, and ISO 17292 and is tested to ensure proper operation, minimal leakage, and long service life.

This valve is ideal for instrument isolation, gauge protection, chemical injection, sampling connections, and other applications where safe and reliable dual isolation is required. Its compact and integrated design reduces installation complexity, simplifies system layout, and provides a safer and more efficient solution compared to assembling individual valves.

View Details