Ballycatter.ca - Industrial Equipment

The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. View Details

Hydraulic cylinder for various industrial applications

A hydraulic cylinder is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end/head-end). View Details

Service Rig for well servicing activities on onshore wells in any location

Service rig suitable for well interventions, workers, abandonments, and completion activities. Rigs can be sized for specific well campaign requirements with valid safety case for jurisdiction. Cost effective alternative to larger drilling rigs or hydraulic worker units for a wide range of activities. Well maintained rig fleet staffed by oil and gas industry professionals providing top notch service and flexibility in location and activities. Able to be deployed in any geographic area with a focus on project results. View Details

Pull and Set SCSSV

InWaTec Combined: Ensuring Well Integrity with Advanced Pulling and Setting SCSSV Services The oil and gas industry faces the critical challenge of maintaining well integrity for uninterrupted production. At InWaTec Combined, we understand the importance of robust well operations, and our Pulling and Setting Surface Controlled Subsurface Safety Valve (SCSSV) services are at the forefront of addressing this challenge. Revolutionizing DHSV Repair A malfunctioning Downhole Safety Valve (DHSV) can halt production and compromise well integrity, making timely and efficient repairs crucial. Our services are meticulously designed to repair Tubing Retrievable Subsurface Safety Valves (TRSSSV), a process that not only restores well integrity but also resumes production swiftly. By repairing TRSSSVs, we circumvent the need for lock open operations, avoiding the necessity of installing a Wireline Retrievable Subsurface Safety Valve (WRSSSV) which could potentially restrict production flow. Optimized Repair Techniques Conventional repair methods are often time-consuming and costly, requiring extensive workover operations. InWaTec Combined’s approach replaces these outdated methods with cutting-edge techniques that save time and reduce costs. Our expertise in pulling and setting SCSSVs ensures that if a TRSSSV's functionality and integrity cannot be restored, it can be locked open efficiently. We then install a WRSSSV, which is a strategic move that prevents the need for a complex workover, thereby optimizing the repair process. Maintaining Peak Performance The ability to swiftly switch from a TRSSSV to a WRSSSV without a full workover is a game-changer in well service operations. It minimizes downtime and ensures that wells can continue to operate at peak performance levels. Our dedicated teams are equipped with the latest technology and have the expertise to execute these operations seamlessly, ensuring minimal disruption to your production schedules. A Partner in Well Integrity At InWaTec Combined, we pride ourselves on being your trusted partner in maintaining well integrity. Our Pulling and Setting SCSSV services are not just about repairs; they are about providing a comprehensive solution that safeguards your operations against future integrity issues. With our advanced techniques and committed service, we guarantee that your wells remain productive, secure, and profitable. In conclusion, InWaTec Combined is dedicated to providing superior service in the repair and maintenance of SCSSVs. Our innovative approach is designed to keep your wells functioning smoothly, ensuring that well integrity is not just restored but fortified. Trust us to be the guardians of your well's safety and productivity. View Details

FH Hydrostatic Retrievable Packer

The FH™ is the industry-standard, hydrostatic-set and shear-release single-string retrievable packer. It can be used in the following applications: production, injection, and zonal isolation; single-string selective completions or dual-string completions with multiple packers; deviated wells or other applications when rotation for installation or removal is not beneficial; when it is beneficial to displace and set packers after the well is flanged up; when testing the tubing string before packer setting or to independently set and test individual packers in multiple packer completions is beneficial. The FH packer is hydraulically activated by applying tubing pressure against a plugging device below the packer. The packer requires only straight pull to release. The FHL™ is the large-bore version of the FH packer. Features, advantages and operational procedures are the same as those for the FH packers Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; Baker Hughes low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917) View Details

9 5/8" Mech-1 Single Grip Mechanical Set Packer for 40-47 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Tubing Hanger Coupling – 6 5/16” to 2 1/2”

The 6 5/16” to 2 1/2” Tubing Hanger Coupling is a specially made part used in oil and gas wells to connect a large casing opening to smaller tubing—typically 6 5/16 inches—to a smaller 2 1/2-inch upset production tubing. This size combination is often selected for well designs that require a broader casing interface for flow management, safety equipment, or well control hardware, while maintaining a slimmer production string for specific flow requirements or structural considerations.

This coupling is manufactured with upset-end compatibility, meaning it is suited for tubing that has thickened ends designed to strengthen threaded connections. This feature improves mechanical reliability and helps the connection withstand downhole pressure, tensile loads, and thermal cycling. The union nut design allows the coupling to be installed by tightening the nut without rotating the upper wellhead assembly, which is particularly useful in space-constrained or high-integrity environments.

To accommodate a range of operational needs, the coupling can be threaded on both ends to suit different tubing or spool designs and is compatible with back pressure valves—providing added safety during pressure control, intervention, or servicing. Built in accordance with API specifications and from high-strength materials, the coupling is designed to operate reliably in demanding conditions, including high-pressure wells and corrosive environments.

View Details

ROV Surface Console

MIG Gun M250 Series

Introducing the Revolutionary MIG Gun M250 Series: Your Ultimate Welding Companion When it comes to heavy-duty, durable, and high-performance MIG guns, look no further than the Canaweld M250 Series. Crafted with precision and innovation, this newly designed MIG gun sets a new standard in the welding industry. Engineered to meet the demands of the oil and gas industry, the M250 Series will transform the way you weld, offering unmatched versatility, comfort, and efficiency. Built for Excellence - Unleash the Power of Adaptability The M250 MIG gun boasts a unique and cutting-edge feature that sets it apart from the rest - the ability to convert termination styles seamlessly. With a simple replacement, you can switch between Euro style, Lincoln® style, Tweco® style, or Miller® style, ensuring compatibility with various welding machines. This adaptability makes the M250 Series a true game-changer for welders, offering unmatched flexibility in their welding projects. Unrivaled Features - Mastering Welding Precision Let's dive into the exceptional features of the Canaweld M250 Series: 1. Knuckle Joint: Experience improved balance and position-ability as the handle and neck move independently of the cable assembly. Weld with greater precision and control. 2. Durable Cable: The M250 MIG gun boasts excellent heat, abrasion resistance, and flexibility in its cable. It's lighter than standard cable sets and can withstand over 1 million flexes in life testing, ensuring it stands the test of time. 3. Premium Contact Tips: Crafted from premium grade copper alloys, the contact tips are extremely durable, offering superior performance and efficiency. 4. High-Quality Accessories: Choose from a range of durable and high-performance options for tip adaptors, diffusers, and swan necks, tailoring your MIG gun to suit your specific needs. 5. Ergonomic Handle Design: Enjoy comfortable handling with the ergonomic design of the handle, reducing welder fatigue and promoting longer welding sessions. 6. Air Gap Technology: The M250 MIG gun utilizes air gap technology for cooler running handles and better heat transfer isolator from the swan neck, ensuring efficient and effective welding. 7. Versatile Liner: The steel and combo liner cater to all types of wires, including steel (metalcore and flux-cored), stainless steel (metalcore and flux-cored), and aluminum, making it suitable for a wide range of welding applications. 8. Effective Sealing: The unique sealing ring ensures effective sealing of impurities, particularly in the argon gas process, promoting cleaner welds. 9. Push-on Nozzle System: Easily adjust nozzle stick-out with the push-on nozzle system, streamlining your welding workflow. 10. High-Quality Trigger: The M250 MIG gun comes with a high-quality trigger that boasts a life expectancy of over 1 million cycles, offering durability and reliability in every weld. Elevate Your Welding Experience with Canaweld M250 Series At Canaweld, we strive to empower welders with the latest advancements in welding technology. The M250 Series is a testament to our commitment to excellence, providing welders with a powerful, versatile, and comfortable welding solution. Experience the future of welding with the Canaweld M250 Series - Your Ultimate Welding Companion! View Details

Monoflange DBB Double Block & Bleed Valve – Flange x Thread – OS&Y and Needle Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange DBB Double Block & Bleed Valve Flange x Thread with OS&Y and Needle Isolation is designed to provide reliable dual isolation with a controlled bleed in a single assembly. This configuration replaces the need for multiple individual valves, reducing the number of potential leak points and simplifying installation in oil and gas applications. The first isolation is achieved using an OS&Y valve, while the second isolation and the drain function use a needle valve, providing precise control over fluid venting and depressurization.

This valve is suitable for instrument and gauge isolation, chemical injection points, sampling connections, and direct or remote mounting of instruments. It supports high-pressure systems with a range from Class 150 to Class 2500, and accommodates both reduced and full bore options. Constructed from durable materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, the valve can also be supplied with NACE-compliant materials on request.

Manufactured in accordance with recognized standards such as ASME B16.34, API 6D, and ISO 17292, the Monoflange DBB provides a compact, robust solution for dual isolation with reliable venting. Its integrated design reduces stress on piping systems, minimizes maintenance needs, and ensures consistent performance in critical oil and gas applications.

View Details

Oil Absorbent Net-Bag Pillows with Handle

Oil Absorbent Net Bags represent a paradigm shift in spill cleanup technology. The unique composition, impressive absorption capacity, and Canadian origin position them as a cutting-edge solution for large spills. As industries continue to prioritize efficiency, cost-effectiveness, and environmental responsibility, Oil Absorbent Net Bags stand at the forefront of progressive spill cleanup methodologies. Oil absorbent Net Bags contain polypropylene strips in a nylon mesh bag. and absorbs up to 10L (2,64 gal) of oil for each bag and repels water. Introduction: Large spills, particularly those involving oil, demand a tailored approach to cleanup. The conventional methods often fall short, necessitating the introduction of specialized tools. Oil Absorbent Net Bags have emerged as a promising solution, offering a combination of advanced materials, superior absorption capabilities, and efficiency in maintenance and disposal processes. Look at the technical design optimizes both absorption capacity and structural integrity because strips of polypropylene, a highly effective oil-absorbing material, are encapsulated within a durable nylon mesh bag. Also, the bag has a high absorption capacity, it stands out to absorb up to 10 liters (2.64 gallons) of oil. This impressive capacity positions it as a reliable and efficient tool for large spill cleanups, minimizing the need for frequent replacements and optimizing resource utilization. A distinctive trait of these net bags is their ability to repel water while selectively absorbing oil. Oil Absorbent Net Bags have proven to be several times more absorbent than traditional methods. The specialized composition enables to outperform alternatives, ensuring a faster and more thorough cleanup process. This not only streamlines the cleanup operation but also translates into lower maintenance costs. The Canadian origin aligns with a culture of environmental responsibility. By choosing Oil Absorbent Net Bags, users contribute to sustainable practices, supporting a product with a minimal ecological footprint. And we ensure that this product meets and exceeds expectations of a good cleanup. Good for the environment and good for you. View Details

5 1/2" Mech-1 Single Grip Mechanical Set Packer for 13-15.5 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

TIG Welder DC 202 Pulse-D

Experience Precision and Professionalism with the TIG DC 202 Pulse-D Welding Machine At Canaweld, we understand the importance of precision and sleek design in welding, especially for industries like oil and gas, marine, aerospace, and medical. That's why we offer a wide range of TIG welders designed to give you the control necessary to achieve professional results with various parent metals. Our TIG welders are the ultimate choice for welders who demand excellence and quality in their work. Introducing the TIG DC 202 Pulse-D - Your Portable Powerhouse The TIG DC 202 Pulse-D is a welding machine that sets new standards in the industry. Portable, powerful, and versatile, it is the perfect tool for welders seeking exceptional TIG welds on stainless and mild steel or Stick welding. The professional pulse features, combined with HF start, make it an ideal companion for achieving high-quality welds, even on very thin steel, with no distortion. Unmatched Features for Unrivaled Performance At Canaweld, we believe in delivering welding machines that exceed expectations. The TIG DC 202 Pulse-D is packed with features that enhance your welding experience: • High Frequency (HF) for start, ensuring a smooth and efficient start to your welding projects. • Rigorously tested in (104°F/40°C) to guarantee optimal performance even in the toughest conditions. • Digital control of all welding parameters, giving you precise control over your welding process. • Dual control options: Amperage control accessible by both foot pedal and fingertip controls on the torch body, offering convenience and flexibility during welding. • Pulse TIG welding for better arc control and reduced workpiece deformation, resulting in professional welds on thin materials. • Exceptional welding characteristics in Stick mode with the most common rod in the market, adding versatility to your welding tasks. • Long-distance welding capability: Ability to use up to 165 feet (50 meters) leads without any power loss at the welding circuit, giving you freedom of movement on the job. • Digital adjustment of pre-gas, base current, welding current, slope up, pulse parameters, slope down, and post-gas with digital display for precise customization. • Arc Force automatically selects the best welding arc dynamics, optimizing your welding performance. • Visual welding current pre-setting ability for accurate and efficient parameter selection. • Fan cooled and thermally protected against overheating, ensuring durability and safety during operation. • Durable metal face panel, guaranteeing longevity and protection. • Generator compatible, providing versatility and adaptability for various worksites. Your Welding Excellence is Our Priority We take pride in our products, and the TIG DC 202 Pulse-D is no exception. To ensure your satisfaction and confidence in our welding machine, we offer a comprehensive 3-year warranty, protecting your investment and giving you peace of mind. Elevate Your Welding Experience with Canaweld Take control of your welding projects with precision and professionalism. Choose the TIG DC 202 Pulse-D from Canaweld and experience welding excellence like never before. Whether you're in the marine, aerospace, or medical industry, or any other field that demands top-tier welds, this welding machine will deliver unparalleled performance and superior results. Invest in the future of welding technology. Choose Canaweld, and unlock your welding potential with the TIG DC 202 Pulse-D. Experience precision, power, and professionalism in every weld. View Details

Ball Valve Lever Operated – 2-Way Female x Female End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 psi – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated – 2-Way Female × Female is a high-performance isolation valve designed for oil and gas piping systems where reliable flow control is essential.

Its female × female connections allow for secure inline installation directly onto male-threaded pipes or fittings, simplifying assembly, reducing the need for additional adapters, and minimizing potential leak points. This configuration is particularly useful in production lines, injection lines, sampling lines, and other pipelines with male-threaded ends.

The valve features a floating ball design that provides seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions. Operation is simple and efficient with a quarter-turn lever, allowing fast opening and closing with low torque. The internally loaded stem with shoulder prevents blowout, enhancing operational safety, while replaceable seats and packings extend service life. The maximum orifice design also minimizes pressure drop across the valve.

This valve is suitable for a wide range of oil and gas applications, including upstream, midstream, and downstream pipelines. It is factory tested to ensure leak-proof performance and can be supplied to meet NACE MR0175 standards and fire-safe requirements. Heat code traceability ensures quality and material verification for all components, making this valve a dependable and durable solution for industrial environments.

View Details

General Mechanical Slickline Service

InWaTec Combined: Precision at Depth with General Mechanical Slickline Services In the demanding arena of oil and gas well maintenance, precision is not just a virtue—it's a necessity. At InWaTec Combined, we provide General Mechanical Slickline services that bring precision to the heart of your well operations. Our slickline services deliver targeted maintenance solutions, assuring that performance, integrity, and productivity remain at the forefront of your downhole activities. The Role of Slickline in Downhole Maintenance Slickline is the unsung hero of well servicing, a slender thread of robustness, lowering essential tools into the depths of oil and gas wells to execute critical maintenance tasks. It is the conduit for precision, the means by which tools are delivered to the precise downhole location where they are needed. Why Choose InWaTec Combined's Slickline Services? Expertise at Every Turn: Our slickline operators are seasoned experts, with the skill to navigate complex downhole environments, ensuring that every tool is deployed with accuracy. Versatile Tool Deployment: From routine maintenance to emergency interventions, our slickline services cater to a diverse range of downhole needs, delivering the right tool to the right place at the right time. Streamlined Operations: Efficiency is key in downhole operations, and our slickline services are designed to minimize downtime, streamline processes, and maintain the peak performance of your wells. Safety and Precision Combined: At InWaTec Combined, we balance the need for operational precision with an uncompromising commitment to safety, ensuring that every slickline operation upholds the highest standards. Tailored Solutions for Downhole Challenges Every well presents its own set of challenges, and InWaTec Combined's General Mechanical Slickline services are crafted to meet them head-on. We provide tailored solutions, customizing our approach to fit the unique needs of your well, ensuring that maintenance tasks are carried out with precision and care. Advanced Technology for Optimal Results We leverage the latest in slickline technology, utilizing advanced materials and innovative techniques to enhance the reliability and effectiveness of our services. Our commitment to technological advancement means that we're always at the cutting edge, providing services that are not just current but future-ready. Your Partner in Well Maintenance Choosing InWaTec Combined for your slickline needs means selecting a partner dedicated to the success of your well operations. Our General Mechanical Slickline services are a reflection of our promise to deliver excellence in every aspect of our work, from the initial deployment of tools to the completion of maintenance tasks. Conclusion: Your Well's Performance, Our Commitment In conclusion, InWaTec Combined's General Mechanical Slickline services are essential for maintaining the high performance and integrity of your oil and gas wells. With our focus on precision, efficiency, and safety, we ensure that your maintenance operations are performed to the highest standards. Trust in the expertise and dedication of InWaTec Combined to keep your wells operating smoothly, safely, and efficiently. View Details

2 9/16" Coiled Tubing Hanger, Rated 5M

The 2 9/16” 5M Coiled Tubing Hanger is a tool designed to securely hold coiled tubing in place during well operations where pressure can be high—up to 5,000 psi. It is built to support heavy coiled tubing and the equipment attached to it when performing tasks deep inside the well.

This hanger works with coiled tubing sizes of 1 inch, 1¼ inches, 1½ inches, and 1¾ inches in outside diameter, making it suitable for a range of tubing types used in different well operations. It connects to the wellhead using standard flanged connections.

A special feature of this hanger is its wireline entry sub. This part acts as an extra seal around the tubing to maintain pressure control in the well while allowing wireline tools to pass safely through the tubing. The wireline entry also prevents the tubing from moving upwards during operations, which helps protect the equipment and maintain well safety.

The hanger is powered by electricity, which supports reliable operation in the field. Overall, the 2 9/16” 5M Coiled Tubing Hanger helps keep the tubing stable, maintain well pressure, and allow tool access during important tasks like cleaning the well, stimulating production, or running diagnostic tools.

View Details

Lock Mandrels for Landing Nipples

Enhancing Downhole Operations with HOCA Oil Tools' Lock Mandrels for Landing Nipples In the intricate landscape of oilfield operations, achieving peak efficiency and maintaining well integrity are of utmost importance. HOCA Oil Tools, a leader in downhole slick line tools, introduces its Lock Mandrels for Landing Nipples, designed to meet these challenges head-on. These Lock Mandrels are crafted for precision, reliability, and durability, ensuring they meet the diverse needs of modern downhole activities. HOCA's Lock Mandrels for Landing Nipples: Tailored for Excellence Our Lock Mandrels are engineered to be set into pre-positioned landing nipples within the wellbore, providing a secure and reliable platform for the deployment of various downhole tools and instruments. Available in multiple types such as 'ROTR', 'ROTRN', 'ROTX', and 'ROTXN', our Lock Mandrels cater to a wide range of downhole conditions and operational requirements. They can be selected based on the specific flow control accessory attached, making them either Selective or No-Go types to suit different operational strategies. Experience the HOCA Oil Tools Difference By integrating HOCA Oil Tools’ Lock Mandrels into your downhole toolkit, you're choosing a product backed by our commitment to quality, innovation, and customer service. These mandrels are not just tools but solutions designed to enhance the efficiency and safety of your downhole operations. Our Lock Mandrels for Landing Nipples represent the intersection of innovation and practicality, providing the reliability and performance essential for today's oilfield challenges. Choose HOCA Oil Tools for your downhole needs and experience the difference that quality and expertise can make in your operations. Embrace the future of downhole operations with HOCA Oil Tools, where technology meets tradition to drive success in the oil and gas industry. View Details

Subsurface Direct Controlled Safety Valve 4.26 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Field Operators

Trusted Field Operators: The Heart of Lovat Gas Solutions At Lovat Gas Solutions, our success is built upon the expertise and dedication of our field operators. With over 80 years of combined experience, our team draws upon their vast knowledge to deliver exceptional service. From assisting gas utilities during pipeline outages to executing complex flare gas capture projects, our field operators are at the forefront of making it all happen. What sets our field operators apart? 1. Extensive Experience: Our team of field operators possesses a wealth of experience gained through their involvement in various gas-related projects. Whether it's managing pipeline outages or executing flare gas capture initiatives, they have the expertise to handle diverse challenges with precision and efficiency. 2. Compressed and Cryogenic Gases Expertise: We specialize in compressed gases and liquefied cryogenic gases. Our field operators have undergone rigorous in-house training, equipping them with the necessary skills to handle these gases safely and efficiently. You can trust them to deliver gas wherever it's needed, ensuring a seamless supply for your operations. 3. Safety-Focused Approach: Safety is paramount in everything we do. Our field operators receive comprehensive safety training to ensure compliance with industry standards and best practices. They are well-prepared to support your operations on short notice, providing a reliable and safe service that you can depend on. 4. Nationwide Reach: With experience spanning from the north to the south and east to west of Canada, Lovat Gas Solutions has established a strong presence across the country. Our field operators are well-versed in the unique requirements of different regions, allowing us to provide comprehensive support to clients nationwide. When you choose Lovat Gas Solutions, you gain access to a team of field operators who are dedicated to delivering excellence. With their expertise, commitment to safety, and nationwide reach, they are ready to support your mobile gas needs. Contact a Lovat Gas Solutions expert today to discuss how our skilled field operators can assist you. Whether you require gas supply, project execution, or emergency support, trust our team to deliver reliable solutions that drive the success of your operations. Experience the difference of working with field operators who are the heart of Lovat Gas Solutions. View Details

Cranes of various sizes and ratings for onshore lifting and placement

Mobile cranes can be used to access narrow passages and navigate project sites that have limited space, making them a practical solution for many industries, site conditions, and materials. Let us help manage your crane and material handling requirements for your project. View Details

Hard Hat with full brim drillers hard hat and 6 point ratchet strap

This drillers hard hat is made of polyethylene with a six-point ratchet suspension type. This hard hat is available in green, is size 6 1/2 to 8, and meets CSA Z94.1-2005 standards. ANSi classification is Type 1 Class E This brim offers 360-degree protection from falling objects, chemical splash, and weather elements like the sun and rain. Full brim hard hats allow for added protection from the elements without reduced visibility. These hard hats also provide more protection against falling objects and the sun by providing more shade than a cap style helmet. Pricing is based on minimum order of 20, for smaller orders please make contact for alternatives. View Details

HDI 1522 Choke Position Indicator System

The HDI 1522 Choke Position Indicator System is an electronic instrument designed to accurately measure and display the position of choke valves used in oil and gas production. Choke valves regulate the flow of oil, gas, or water from wells by adjusting the degree of restriction in the pipeline, which directly affects pressure control and production rates. The 1522 system provides highly precise position readings in one percent increments, ranging from fully closed (0%) to fully open (100%), enabling better management of well performance and enhanced safety.

This system uses solid-state electronics to convert mechanical valve movement into electronic signals via various potentiometer types—including linear, rotary, and retractable options—making it adaptable to a wide variety of choke valve designs and configurations. The position data is presented on a four-inch liquid crystal display that combines a numeric readout with a linear bar graph, allowing clear and immediate visualization of the choke’s exact position. The display is engineered for visibility from distances up to fifteen feet, suitable for typical field environments.

Powered by an internal, field-replaceable battery with approximately one year of continuous operation, the 1522 system minimizes maintenance requirements and eliminates the need for complex wiring. It also offers optional analog output signals, such as 4-20 mA or 0-1 V, enabling seamless integration with plant control systems, programmable logic controllers, data acquisition systems, or remote display units for centralized monitoring and automation.

The enclosure is constructed from UV-stabilized, impact-resistant polycarbonate and PBT alloy materials to ensure durability in harsh outdoor conditions. It is rated to operate reliably within a wide temperature range from -40°F to 176°F (-40°C to 80°C). The internal electronics are protected by a gasket seal to prevent dust and moisture ingress, maintaining performance and longevity.

Installation flexibility is enhanced through support for cable lengths up to 1,500 feet, allowing the gauge to be mounted in the most accessible or secure locations. Multiple sensor housing options and connector orientations simplify field installation and reduce the need for onsite customization, helping to minimize downtime and installation costs.

The 1522 Choke Position Indicator System delivers accurate, real-time choke valve position information in a robust, easy-to-install package. Its reliable performance, flexible integration capabilities, and low maintenance design support improved flow control, safer operations, and optimized production.

View Details

Pressure and Temperature Memory Gauge Service

Enhancing Well Performance Insights with InWaTec Combined’s Memory Gauge Services At InWaTec Combined, we recognize that the quest for efficiency within the oil and gas sector hinges on the precision of data collected from the depths of the earth. This is precisely why we offer top-tier Pressure and Temperature Memory Gauge Services—a tool crucial for optimizing well productivity and ensuring operational integrity. Our electronic Memory Gauges are engineered to withstand the rigorous conditions of the downhole environment, providing accurate records of pressure and temperature. These robust instruments are the sentinels of the wellbore, vigilantly recording data that is vital for the evaluation of well performance and reservoir behavior. The utilization of Memory Gauges is central to gauging bottomhole pressures and temperatures across varying production rates. This data is instrumental in conducting build-up and drawdown tests, which are essential for assessing well productivity. With the insights garnered from these tests, operators can make informed decisions about stimulation, enhancement, and management of their well systems. InWaTec Combined’s Memory Gauges are not just instruments; they are the bearers of information that can significantly impact the economics of well operations. By accurately capturing downhole conditions, our gauges assist in pinpointing production issues, facilitating timely interventions that can forestall costly downtime and mitigate potential hazards. Our commitment at InWaTec Combined is to provide our clients with not just data, but solutions that translate into cost savings, increased safety, and environmental protection. Investing in our Memory Gauge Services means investing in the longevity and prosperity of your wells. Let us partner with you to harness the full potential of your reservoirs with precision, reliability, and expertise that you can trust. View Details

Sabre Retrievable Packer

Baker Hughes introduces the SABRE™ mechanical-set retrievable packer. This packer is a single-string retrievable packer based on the proven performance and reliability of the Hornet packer. It is especially designed to perform reliably in standard-pressure injection and production applications. It is a tension set or compression set and can be landed in compression, tension, or a neutral condition. The SABRE provides reliable performance in a retrievable packer under combined conditions of 250°F (121.1°C) and 7,000 psi (482.6 bar) differential above or below the packer. We can source from current stock or direct from the manufacturer. View Details

LM2500 HPT Vertical Stand

The LM2500 High Pressure Turbine (HPT) Vertical Stand is a support fixture designed to hold the HPT module of the LM2500 gas turbine in a vertical position. It is mainly used during maintenance, inspection, or transport of the turbine module.

By keeping the turbine upright, the stand helps ensure that the module stays stable and properly aligned while work is being done. This setup also makes it easier for technicians to access certain areas of the HPT that would be harder to reach if the module were lying flat.

The stand is built to handle the weight of the HPT and includes features like mounting points or forklift slots for safe and easy movement within a workshop or maintenance area. It is commonly used in the oil and gas industry where LM2500 turbines are found in power generation or mechanical drive applications.

In short, the HPT Vertical Stand is a practical tool that helps keep the turbine secure, makes maintenance tasks safer, and supports good handling practices.

View Details

ImplosionStixx by StimStixx

Introducing the ImposionStixx by StimStixx Technologies - Redefining Wellbore Perforation Cleaning with Precision Implosion! Are you ready for a game-changing solution to enhance your wellbore perforation cleaning? Look no further than the ImposionStixx by StimStixx Technologies. Our revolutionary product utilizes a specially formulated solid acid stick, capable of delivering heated acid vapor with pinpoint accuracy at the zone of interest, while creating an extraordinary implosion downhole. Harnessing the power of highly reactive heated acid vapor, the ImposionStixx guarantees increased penetration and optimal contact with contaminants and carbonate scale, effectively cleaning wellbore perforation tunnels like never before. The implosion created downhole ensures a thorough and efficient cleaning process, leaving no room for compromise when it comes to well stimulation. The ImposionStixx offers unparalleled environmental benefits as well. As the heated acid vapor interacts with contaminants and carbonate scale, it vaporizes and becomes fully spent down-hole, leaving no contaminated effluent behind. This not only reduces the risk of spills at the surface but also eliminates the need for post-treatment clean-up or disposal. With StimStixx Technologies, you can rest assured that you are making a choice that prioritizes both operational excellence and environmental responsibility. Say goodbye to traditional methods that fall short in achieving the level of precision and effectiveness you deserve. The ImposionStixx is here to revolutionize wellbore perforation cleaning, providing you with exceptional results, increased operational efficiency, and peace of mind. Join the ranks of industry leaders who trust StimStixx Technologies to deliver cutting-edge solutions for well stimulation. Experience the power of precision implosion with the ImposionStixx and unlock the true potential of your wellbore perforation cleaning. The future of well stimulation starts here. View Details

LM2500 Gas Turbine

The LM2500 Gas Turbine is a high-efficiency power unit designed for use in industrial, marine, and utility applications. It’s commonly used for grid support, combined heat and power, and in mobile or remote power installations.

The turbine uses a single-rotor gas generator that can be connected to a power turbine. Inside, it includes a 16-stage compressor, an annular combustor, and a two-stage high-pressure turbine—to deliver strong performance in demanding environments.

Built for flexibility, the LM2500 is well-suited for operations that require frequent start-and-stop cycles. It can ramp up from a cold shutdown to full power in under five minutes, making it a reliable option for fast, on-demand power delivery.

Adding to its versatility, the LM2500 supports a wide range of fuels—including natural gas, diesel, aviation fuel, naphtha, LPG, ethane, ethanol, biodiesel, and more. This fuel flexibility makes it easy to integrate into different operating environments.

Its proven adaptability and performance have made the LM2500 the most widely used gas turbine in the 25–37 megawatt range.

In addition to high efficiency and reliability, the LM2500 delivers low emissions—even in challenging environments or when water availability is limited. With control system redundancy and several configuration options, it offers a customizable solution for dependable, efficient power generation.

View Details

Water Injection Safety Valve 4.25 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

5" Mech-1 Single Grip Mechanical Set Packer for 11.5-15 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Long Haul Link Repairs

Unveiling Nulux's Robust Solution for Maintaining the Lifeblood of Your Operations: Long Haul Link Repairs In the vigorous and demanding milieu of the Oil and Gas industry, the stakes are astronomically high and the margin for error is strikingly slender. Here, communication is more than just a transfer of data; it’s the unerring lifeline that ensures smooth, synchronized, and secure operations. Introducing Nulux Network Solutions' pivotal service in the realm of Long Haul Link Repairs, ensuring that the veins of communication within your expansive operations remain unimpeded and robust, even in the face of unpredicted adversities. Embarking on a Journey of Resilient Connectivity Nulux Network Solutions, a harbinger of stellar products, solutions, and services throughout the entire energy value chain, strides with a commitment of not only delivering unparalleled network solutions but also aiding our customers in forging a path toward a more sustainable future. Long haul fiber optic links, spanning vast terrains, often traversing through some of the most inhospitable environments, form the critical backbone of communication networks in the Oil and Gas industry. Their impeccable functioning is non-negotiable, ensuring that every fragment of data from remote operational sites is conveyed precisely, securely, and without latency to where it is indispensably required. Nulux’s Long Haul Link Repair: A Vigilant Guardian of Your Communication Networks Our long haul link repair service is not merely a reactive solution to the unexpected impediments that might assail your fiber optic communications but a strategic, anticipatory shield that ensures your operations remain perpetually connected and resilient. In electing Nulux’s Long Haul Link Repair Service, you fortify your operations with: Proactive Vigilance: Monitoring and maintaining the integrity of your long haul links to predict and preemptively address potential issues before they escalate into critical failures. Rapid Response and Resolution: Ensuring that, in the event of disruptions, our team mobilizes with expeditious proficiency to diagnose, locate, and repair faults, reinstating the vitality of your communication backbone. End-to-End Expertise: Nulux’s veteran technicians, equipped with over two decades of combined experience and nuanced understanding of the challenges peculiar to the oil and gas sector, facilitate meticulous, rapid, and robust repair solutions. Comprehensive Aftercare: Post-repair, we ensure your links are not merely restored but optimized, and provide comprehensive reports and aftercare to preclude future occurrences and enhance overall network performance. Steadfast Communications with Nulux Your long haul links do more than just convey data; they ensure the heartbeat of your operations remains rhythmic and unerring. Nulux stands as a sentinel, ensuring these critical lifelines are perpetually robust, secure, and operational, safeguarding not merely your data but the seamless synchronicity of your extensive operations. Engage with Nulux Network Solutions, and let’s construct a future where your communications are not merely sustained but are resilient, where every byte of data traverses through your networks with unerring precision, and where every long haul link is more than a conduit, but a steadfast, unbreakable bond that perpetuates your operational excellence. View Details

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

Knuckle Joint for Wireline Toolstring

Enhancing Wireline Flexibility with HOCA Oil Tools B.V.'s Advanced Knuckle Joints In the demanding environments of oil and gas extraction, the adaptability and precision of downhole tools are paramount. At HOCA Oil Tools B.V., we specialize in providing state-of-the-art wireline solutions, including our wide range of Knuckle Joints, known for their exceptional flexibility and reliability. Our Knuckle Joints are designed to provide pivotal flexibility in the Wireline Tool String, facilitating angular movement between the tool string and the running or pulling tool, an essential feature for navigating complex downhole geometries. Six Key Benefits of HOCA's Wireline Knuckle Joints: Enhanced Flexibility: Our Knuckle Joints allow for angular movement, enabling the Wireline Tool String to navigate through deviated wellbores efficiently. Improved Tool Placement: By enabling better maneuverability, our Knuckle Joints facilitate precise tool placement, improving the success rates of downhole operations. Increased Operational Range: The added flexibility extends the operational range of wireline tools, allowing for more complex and challenging interventions. Robust Design: Constructed with high-quality materials, our Knuckle Joints withstand harsh downhole environments, ensuring longevity and reliability. Versatile Application: Suitable for a variety of downhole activities, our Knuckle Joints are essential for both standard operations and complex well interventions. Easy Integration: Available with both Threaded and QLS Connections, our Knuckle Joints seamlessly integrate into existing tool strings, enhancing operational efficiency. HOCA's Diverse Array of Wireline Knuckle Joints: Type ‘AO’ Knuckle Joints (Threaded Connection): These are available in sizes from 3/8” to 2 1/2”, designed for easy integration with various tool strings. They offer exceptional flexibility and strength, with sizes accommodating different operational needs, ensuring that tools can navigate wellbore paths effectively. Type ‘AD’ Knuckle Joints (QLS Connection): Catering to advanced operational requirements, these Knuckle Joints provide the same high-level flexibility with quick lock-and-seal connections for faster deployment and retrieval, available in sizes ranging from 1 1/2” to 2 1/2”. Rebco Type ‘AS’ Knuckle Joint (RQLS Connection): An addition to our lineup, offering enhanced swivel action and compatibility with a range of wireline tools, facilitating seamless downhole operations. Each of our Knuckle Joints is engineered with precision, incorporating features such as double fishing necks for increased adaptability and operational safety. The diverse sizes and connection types we offer ensure that there is a HOCA Knuckle Joint suitable for every downhole challenge. By choosing HOCA Oil Tools B.V. for your wireline operational needs, you are selecting a partner dedicated to innovation, quality, and customer service. Our Knuckle Joints represent just one aspect of our commitment to providing the oil and gas industry with tools that meet the highest standards of performance, reliability, and safety. Embrace the flexibility and efficiency of HOCA’s Wireline Knuckle Joints to enhance your downhole operations. Contact us today to learn more about how our tools can transform your well interventions and streamline your operational workflows View Details

Transport Trucking services for local and international equipment hauling

Transport trucks for long haul equipment moves. Specializing in international and express shipments. Since truck transportation effectively remains the most direct solution for the transport of your goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. If you need to get your goods from one place to another in a safe, reliable and cost effective way then truck transportation is hard to beat. So hard in fact that transporting goods by truck is still the most widely used mode of transport in Canada and North America. Contact us to arrange your next rig move or industrial equipment shipment. View Details

Gas Turbine LM2500+ DLE 50Hz 1x CC

The LM2500+ DLE in a 1x1 combined cycle configuration—one gas turbine, one heat recovery steam generator (HRSG), and one steam turbine—delivers significantly higher efficiency, exceeding 50% in combined cycle mode.

Designed for high thermal efficiency, fast start capability, and reduced emissions, the LM2500 family is widely used across onshore and offshore environments, including industrial plants, pipeline stations, CHP systems, and utility-scale power production.

The DLE combustion system enables the LM2500+ to maintain low NOx and CO emissions without the need for water or steam injection—simplifying operations and reducing water-related maintenance.

Key features include:

Triple annular combustor design for even temperature distribution and lower emissions across the power range
Electrically actuated DLE fuel valves replacing traditional electro-hydraulic SAC valves for better control
75 pre-mixers in 30 external modules, creating a consistent lean fuel/air mixture
NOx emissions ≤15–25 ppm and CO emissions ≤25 ppm (on natural gas, full load)

With fast ramp-up—achieving base load from cold start in under five minutes—the LM2500 is an ideal choice for fast-start and cycling applications. This performance makes it well suited to dynamic grid environments and industrial use cases requiring quick responsiveness.

View Details

LM2500 DLE Gas Turbine

The LM2500 DLE Gas Turbine is an advanced power generation unit designed to deliver high efficiency while significantly reducing emissions. Utilizing cutting-edge Dry Low Emissions (DLE) technology, it precisely controls fuel and air mixing to minimize nitrogen oxide (NOx) emissions.

The LM2500 DLE utilizes a single-rotor gas generator with a 16-stage compressor and a two-stage high-pressure turbine, coupled with cutting-edge DLE combustion technology to reduce nitrogen oxide emissions. It supports dual-fuel operation on a wide variety of fuels, including natural gas, diesel, aviation fuel, LPG, and even hydrogen blends with concentrations ranging from 5% to 95%. The turbine’s open configuration allows for faster maintenance and quicker engine replacement, minimizing downtime.

Its key benefit is utilizing advanced aeroderivative gas turbine technology with dual-fuel Dry Low Emissions (DLE) capability, achieving ultra-low emissions of just 15 ppm NOx on gas fuel, combined with broad fuel flexibility—making it ideal for meeting strict environmental regulations while providing fast, reliable power for dynamic grid demands.

View Details

6″ Butterfly Bleed Air Valve

The 6″ Butterfly Bleed Air Valve is designed to regulate the flow of compressed bleed air from the compressor section of large gas turbines, such as the LM2500. This valve uses a butterfly-shaped disc permanently attached to a robust shaft, allowing precise control over airflow to reduce pressure and temperature within the turbine system.

With an effective flow area of 19.1 square inches max, this valve accommodates higher volumes of bleed air, making it suitable for turbines with greater airflow requirements. It features a fast response time—less than 320 milliseconds for a full stroke—ensuring timely adjustments to changing operating conditions. The valve’s bearings are engineered for high cycle service, providing durability and reliability even under frequent opening and closing cycles.

The 6″ valve helps protect turbine components by managing thermal loads and maintaining optimal compressor performance, which in turn improves overall turbine efficiency and extends equipment life. It is commonly used in oil and gas applications where maintaining safe, efficient, and reliable turbine operation is critical. This valve also serves as a drop-in replacement in existing turbine systems, requiring no hydraulic or electrical modifications, simplifying installation and reducing downtime.

View Details

StimStixx HotStixx

Are you tired of dealing with stubborn paraffin buildup in your wells? Look no further than HotStixx by StimStixx Technologies. Our cutting-edge product utilizes a specially formulated solid acid stick to deliver heated acid vapor with pinpoint accuracy at the zone of interest, creating a powerful combination of pressure and heat downhole to eliminate paraffin buildup. HotStixx is engineered to tackle paraffin-related challenges head-on. The heated acid vapor, generated by our innovative technology, interacts with paraffin deposits, breaking them down effectively. The precise delivery of pressure and heat ensures maximum penetration, targeting the problematic areas with unparalleled accuracy. Witness the power of HotStixx as it removes paraffin buildup, revitalizing your well's performance. As the heated acid vapor does its job, it quickly vaporizes and becomes fully spent down-hole. Thanks to its high reactivity and relatively low volume, no residual contaminated effluent remains. This eliminates the need for post-treatment clean-up or disposal, reducing environmental risks and streamlining your operations. With HotStixx, you can confidently overcome paraffin challenges while minimizing downtime and maximizing efficiency. Say goodbye to costly and time-consuming maintenance associated with paraffin buildup. With StimStixx Technologies, you can focus on optimizing production and enhancing your well's performance. Join the ranks of forward-thinking industry leaders who trust HotStixx by StimStixx Technologies to eliminate paraffin buildup effectively and efficiently. Experience the power of precision pressure and heat, and unlock the true potential of your wells. The future of paraffin removal starts here. View Details

Valve Manifolds 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT is designed to provide a reliable and compact solution for connecting impulse lines to pressure transmitters and gauges. This manifold allows operators to safely isolate instruments from the process for maintenance, calibration, or testing, without the need to shut down the system. The T-type configuration features two valves that control flow to and from the instrument, enabling efficient block, bleed, and vent operations.

The pipe-to-pipe design ensures a direct connection to the piping system, which reduces potential leak points and simplifies installation. It is suitable for high-pressure applications, with a standard working pressure of 6000 PSI and options available for higher pressures. The manifold is built with a metal-to-metal body and bonnet seal for enhanced durability and temperature resistance, with materials that can comply with NACE MR 01 75 standards for corrosion resistance.

Additional features include a removable T-handle for low-torque operation, self-centering non-rotating stems for consistent shutoff, and a dust cap to prevent contamination. Packing is positioned below the stem threads to isolate the threads from the process media, and the stem’s rolled threads provide smooth operation and long life. The manifold is 100% factory tested for leakage and performance, ensuring reliable operation in critical oil and gas applications.

View Details

5" Mech-2 Double Grip Mechanical Set Packer for 15-18 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

5 1/2" HP-6 Hydraulic Set High Angle Production Packer for 14-20 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

StimStixx Thru-Tubing 3 1/2

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionizing Well Treatment Efficiency! Are you ready for a game-changing solution in well treatment? Look no further than Thru-Tubing Acid Stimulation by StimStixx Technologies. Our innovative product offers quick and easy deployment via electric wireline, providing you with a seamless experience from start to finish. We offer two powerful options to meet your specific needs: HCL and HCL/HF acid blends. With our specially formulated solid acid stick, delivered through slickline, wireline, coil tubing, or tractor conveyance, we ensure heated acid vapor is precisely directed to the zone of interest, providing pinpoint accuracy. The secret behind our success lies in the highly reactive nature of our heated acid vapor. It penetrates contaminants and carbonate scale with increased efficiency, resulting in enhanced contact with the formation. The vapor quickly vaporizes and becomes fully spent down-hole, thanks to its high reactivity and relatively low volume. This unique feature eliminates the need for post-treatment clean-up or disposal, ensuring a cleaner and safer operation. But the benefits don't stop there. Thru-Tubing Acid Stimulation offers numerous advantages that will transform your well treatment process. Our technology reduces CO2 emissions, helping you contribute to a greener future. With reduced downtime and simple implementation, you can save valuable time and resources. The increased precision of our product guarantees optimal results, while its fast-acting nature ensures efficient operations. Lower manpower, rig, and equipment costs further enhance the cost-effectiveness of our solution. Additionally, you can bid farewell to worries about corrosion and wear on machinery, as our product minimizes these concerns. And with no surface spillage and reduced exposure to hazardous materials, safety becomes a top priority. Join the Thru-Tubing Acid Stimulation revolution today and experience the unparalleled efficiency and effectiveness of StimStixx Technologies. Trust us to elevate your well treatment process to new heights. View Details

Lean Environmental Services System (LESS)

Are you looking for a game-changing solution that can revolutionize your oil and gas operations? Look no further than the Lean Environmental Services System (LESS) unit, the innovative mobile system designed to minimize pollution, risks, costs, and time during well service operations. The LESS unit is specifically designed to support and assist various well service operations such as electric line, slickline, and coiled tubing. By preventing any fluid or gas releases during these operations, the LESS unit can eliminate risks to people and the environment. The unit stores all the fluids into its tanks, reducing the risk of spills and leaks that can lead to costly cleanup operations and environmental damage. In addition to reducing risks and pollution, the LESS unit can significantly reduce costs and time associated with well service operations. With its efficient design and advanced technology, the unit can streamline operations and enhance productivity, resulting in faster job completion and higher efficiency. But that's not all - the LESS unit also offers the possibility to re-inject fluids into the well at the end of the job, further reducing environmental impact and promoting responsible resource management. With its sustainable features and advanced technology, the LESS unit is a powerful tool for companies looking to improve their environmental performance and reduce their carbon footprint. Don't miss out on the opportunity to revolutionize your operations with the Lean Environmental Services System (LESS) unit. Contact us today to learn more about how this innovative mobile system can benefit your business and help you achieve your sustainability goals. View Details

7" HP-5 Hydraulic Set Production Packer 32-35 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

K Storm Choke 2 inch

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Truck Oil Absorbent Spill Kit

The spill kit contains, 10 Pads 8” x 19” 2 Sorbent Socks 3” x 4 ft 1 Pair Nitrile Gloves 2 Disposal Bags Pads 8” x 19” Deploy these absorbent pads on liquid spills, especially those involving oil-based substances. Their dimensions and absorbent properties make them effective in quickly containing and cleaning up spills, contributing to a cleaner and safer environment. Whether as part of an emergency response kit or for routine maintenance, these absorbent pads provide a practical solution for liquid cleanup needs. The absorbent pads come in a pack of 10, with each pad measuring 8 inches by 19 inches. This size provides practical coverage for various applications. 2 Sorbent Socks 3” x 4 ft Whether as part of an emergency kit or for routine maintenance, these Sorbent Socks offer a practical solution for managing liquid spills. Quantity: The package contains 2 Sorbent Socks, offering a practical quantity for spill response. Dimensions: Each sock is 3 inches in diameter and 4 feet in length, providing versatility in deployment. Material: Made from sorbent materials designed to effectively contain and absorb liquid spills. Hydrophobic Nature: Repels water, focusing on absorbing oil-based substances. Adaptability: Mouldable model allows the socks to conform to different surfaces and shapes. 1 Pair Nitrile Gloves This package includes 1 pair of Nitrile Gloves, a crucial component of personal protective equipment. Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. 2 Disposal Bags Includes 2 Disposal Bags, essential for the proper containment and disposal of used absorbent materials and contaminated items. Disposal Bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal Bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met spills. Truck Oil Absorbent Spill Kit Used in industrial settings, transportation and areas dealing with hazardous materials. View Details

Solar Charge Controller

All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue View Details

5 1/2" HP-6 Hydraulic Set High Angle Production Packer for 13-15.5 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Provix Lanyard

Elevate Your Gear with the Provix Lanyard – A Versatile Accessory from Wisdom Mining Equipment Provix is proud to introduce the Provix Lanyard (model NWI-PRX-LANYARD), a simple yet essential accessory for miners and professionals in various industries. Designed to fit Cap Light models 2, 3, and 4, this lanyard is a versatile tool to enhance the functionality and safety of your essential equipment. Enhanced Security and Accessibility The Provix Lanyard is expertly crafted to provide a secure way to carry your cap lights. Whether you’re navigating through a mine or working on a construction site, this lanyard ensures that your light source is always within reach. It’s an excellent solution for preventing loss or damage to your cap lights, making your workday more efficient and worry-free. Universal Compatibility Designed with versatility in mind, the Provix Lanyard is compatible with Wisdom Cap Light models 2, 3, and 4. This broad compatibility makes it an invaluable accessory for a wide range of professional lighting needs, ensuring that your cap light is always handy, no matter the model. Durable and Reliable Constructed from high-quality materials, the Provix Lanyard is built to endure the challenging conditions of mining, construction, and other demanding work environments. Its durability and reliability make it a trusted companion in any professional setting. Lightweight and Comfortable The Provix Lanyard is lightweight and comfortable to wear, ensuring that it doesn't add any unnecessary bulk or discomfort to your gear. Its user-friendly design makes it easy to attach and detach from your cap lights, offering convenience and ease of use. A Must-Have for Professionals The Provix Lanyard is more than just an accessory; it’s an essential tool for anyone who relies on helmet-mounted lighting. Ideal for mining, construction, outdoor adventures, and more, this lanyard is a practical addition to your professional equipment. Get Your Provix Lanyard Today Visit Provix to secure your Provix Lanyard and keep your cap lights safe and accessible. Enhance the functionality of your mining equipment with this simple yet effective tool. Check out our website at www.provix.net for more information and to explore our wide range of high-quality mining equipment. View Details

ESP Dual Grip 7 inch Packer

The Ballycatter Model WC-ESP Dual Grip 7” Packer is a hydraulic-set, dual-grip production packer designed for electric submersible pump (ESP) completions in 7” casing. Engineered for high-load applications, it incorporates bi-directional barrel slips that securely anchor the packer against both upward and downward forces, ensuring reliable zonal isolation in high-pressure well environments.

The pass-through section allows seamless integration of ESP power cables, maintaining an uninterrupted electrical connection to the pump below the packer. The single-piece mandrel construction and Acner Array Packing Element enhance durability and resistance to extreme temperatures and corrosive fluids. Additionally, the packer includes NPT chemical injection ports and a vent valve port, facilitating chemical treatments and pressure equalization.

The hydraulic setting mechanism is activated by applying tubing pressure against a plugging device, mechanically locking the packer in place for long-term sealing integrity. The dual-grip anchoring system provides increased stability, making it ideal for high-flow rate production and injection wells. The packer can be retrieved using straight pull release, ensuring efficient removal and minimal well disruption. Compatible with all major cable pack-off or feed-thru devices, the WC-ESP Dual Grip 7” Packer offers superior performance for ESP completions in demanding well conditions.

View Details

2 1/2" Tubing End Locator – 1.750" Max O.D. – 15/16-10 UN Pin × 1-11 1/2 NPT Box – For 2" to 2 1/2" Tubing

In oil and gas well operations, the 2 ½” Tubing End Locator plays a critical role in confirming the exact depth at which production tubing terminates within the wellbore. Accurately identifying the tubing endpoint is essential during various well intervention activities, including maintenance, workovers, and the installation or retrieval of downhole tools and equipment.

During operations such as setting packers, deploying plugs, running logging tools, or performing fishing jobs to recover stuck equipment, precise knowledge of tubing length ensures that tools are positioned correctly. This prevents accidental over-pumping or tool deployment beyond the tubing into the open hole section of the well, where damage to equipment or tool loss can occur.

The 2 ½” Tubing End Locator is designed specifically to fit tubing with an outer diameter of approximately 2 ½ inches. It features a compact maximum outside diameter of around 1.750 inches, allowing it to pass easily within the tubing without causing obstruction. The tool employs a spring-loaded finger mechanism that activates mechanically upon reaching the tubing bottom. This signal does not rely on electronic sensors or depth measurement devices, making the tool highly reliable even in harsh downhole environments where electronics may be compromised by pressure, temperature, or fluid conditions.

Standardized threaded connections on the tool—typically a 15/16 - 10 UN pin on the top and a 1 - 11 1/2 NPT box on the bottom—enable it to be seamlessly integrated into a wide range of intervention toolstrings. These common connection types ensure compatibility with existing downhole equipment and facilitate quick assembly and deployment.

Manufactured from high-strength alloy steel or similar materials, the tubing end locator is built to withstand typical downhole conditions, including high pressure, elevated temperatures, and corrosive fluids commonly found in oil and gas wells. Its purely mechanical design minimizes maintenance requirements and reduces the risk of failure compared to electronic alternatives.

This tool is particularly valuable in wells where tubing length may have changed due to wear, repairs, or previous interventions, offering an essential measure of control and confidence in complex well environments.

View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type