Ballycatter.ca - Industrial Equipment

The LM2500 Gas Turbine is a high-efficiency power unit designed for use in industrial, marine, and utility applications. It’s commonly used for grid support, combined heat and power, and in mobile or remote power installations.

The turbine uses a single-rotor gas generator that can be connected to a power turbine. Inside, it includes a 16-stage compressor, an annular combustor, and a two-stage high-pressure turbine—to deliver strong performance in demanding environments.

Built for flexibility, the LM2500 is well-suited for operations that require frequent start-and-stop cycles. It can ramp up from a cold shutdown to full power in under five minutes, making it a reliable option for fast, on-demand power delivery.

Adding to its versatility, the LM2500 supports a wide range of fuels—including natural gas, diesel, aviation fuel, naphtha, LPG, ethane, ethanol, biodiesel, and more. This fuel flexibility makes it easy to integrate into different operating environments.

Its proven adaptability and performance have made the LM2500 the most widely used gas turbine in the 25–37 megawatt range.

In addition to high efficiency and reliability, the LM2500 delivers low emissions—even in challenging environments or when water availability is limited. With control system redundancy and several configuration options, it offers a customizable solution for dependable, efficient power generation.

View Details

FXE 2-7/8 inch Wireline Retrievable Surface Controlled Subsurface Safety Valve

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Surface Controlled Subsurface Safety Valve Tubing Retrievable Halliburton WellStar 4-1/2 inch

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog. View Details

Needle Valves Integral Bonnet Series – Male x Female – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Integral Bonnet Series – Male x Female is designed for reliable and precise flow control in industrial applications, particularly in oil and gas. Its integral bonnet construction means the body and bonnet are a single piece, eliminating welds and enhancing overall strength, safety, and durability. This design ensures consistent performance under high-pressure conditions and reduces the risk of leakage or mechanical failure.

The Male x Female configuration allows for straightforward installation into piping systems, with the male end threading securely into a female port. This connection type is widely used in process lines, instrumentation, and control systems where accurate flow adjustment, isolation, or sampling is required.

These valves feature a removable T-handle for easy actuation with low torque, rolled stem threads for smooth operation and long service life, and fully supported packing to minimize maintenance. A self-centering, non-rotating stem tip ensures bubble-tight shutoff, while the mirror-finished stem reduces wear on packing and facilitates smooth operation. Optional stellite-tipped stems are available for applications involving abrasive or corrosive fluids, further extending the valve’s lifespan.

This series is ideal for applications requiring precise flow control, reliable sealing, and long-term durability in harsh environments such as high-pressure oil and gas systems, chemical process lines, and instrumentation panels.

View Details

Solar Panel capable of providing power to typical industrial monitoring and control systems

A solar panel, or solar module, is one component of a photovoltaic system. They are constructed out of a series of photovoltaic cells arranged into a panel. They come in a variety of rectangular shapes and are installed in combination to generate electricity. Solar panels are comprised of several individual solar cells which are themselves composed of layers of silicon, phosphorous (which provides the negative charge), and boron (which provides the positive charge). Solar panels absorb the photons and in doing so initiate an electric current. The resulting energy generated from photons striking the surface of the solar panel allows electrons to be knocked out of their atomic orbits and released into the electric field generated by the solar cells which then pull these free electrons into a directional current. This entire process is known as the Photovoltaic Effect. View Details

NORM Storage

Cleanstream: Ensuring Safe and Efficient Storage of NORM Material At Cleanstream, we understand the importance of maintaining a safe and sustainable environment. That's why we have developed rigorous procedures and controls to ensure that NORM material is stored safely and efficiently until proper cleaning and/or disposal can be carried out. NORM, or Naturally Occurring Radioactive Material, is present in many industries, including oil and gas, mining, and manufacturing. While it is a naturally occurring substance, it can be harmful if not handled properly. That's why Clearstream has taken proactive steps to ensure that our clients can safely and responsibly manage their NORM material. Our state-of-the-art storage facilities are equipped with the latest technology to monitor and control environmental factors, including temperature, humidity, and radiation levels. Our experienced team of professionals is trained to handle NORM material safely and efficiently, ensuring that it is stored in compliance with all regulatory requirements. At Cleanstream, we understand that our clients' needs are unique, and we work closely with them to develop customized solutions that meet their specific requirements. Our flexible storage options are designed to accommodate various types of NORM material, and we can quickly and efficiently adapt to changing circumstances. We take great pride in our commitment to safety, quality, and environmental responsibility. Our rigorous procedures and controls ensure that our clients can have peace of mind, knowing that their NORM material is stored safely and efficiently until proper cleaning and/or disposal can be carried out. Contact us today to learn more about how Cleanstream can help you safely and responsibly manage your NORM material. View Details

Gauge Cutter

Enhancing Well Integrity with HOCA Oil Tools B.V.'s Slickline Gauge Cutters In the specialized field of oil and gas exploration and production, maintaining well integrity and efficiency is non-negotiable. At HOCA Oil Tools B.V., we are at the forefront of providing innovative solutions that cater to the complex needs of wellbore maintenance. Our comprehensive array of Slickline Gauge Cutters represents our commitment to excellence and precision, designed to tackle diverse challenges within the tubing string. Multi-functional and Versatile Applications: Our Rebco Type ‘A’ Gauge Cutters serve as multi-functional tools indispensable in the upkeep and maintenance of tubing strings. They are meticulously designed for removing paraffin, corrosion, and other foreign materials from the internal surface of the tubing, ensuring unimpeded flow and operational efficiency. The versatility extends to gauging and tagging obstructions, identifying and marking landing nipples, and preparing wells for the safe insertion of sub-surface controls. These applications underscore the critical role our gauge cutters play in well maintenance and diagnostics, emphasizing their value in operational planning and safety. Customizable Sizes for Precise Operations: Understanding the diversity of wellbore sizes and operational requirements, HOCA Oil Tools offers Gauge Cutters ranging from 1 inch to 7 inches in diameter. This extensive range ensures that all operational needs are met, from smaller interventions to large-scale maintenance tasks. Each gauge cutter can be customized to specific operational needs, ensuring that whatever the well condition or requirement, we have the right tool for the job. How to Order and Customization Options: Our ordering process is streamlined to ensure that you receive the gauge cutter that best suits your operational needs. Gauge cutters are ordered by part number, designated by the outer diameter to three decimal places, ensuring precision and compatibility with your specific well conditions. Additionally, we offer customization options for thread and fishing neck lengths, accommodating unique operational requirements and ensuring that our tools integrate seamlessly with your existing equipment. In conclusion, HOCA Oil Tools B.V. remains committed to providing the oil and gas industry with superior quality tools and customer service. Our Slickline Gauge Cutters are a testament to this commitment, offering unparalleled versatility, efficiency, and reliability in wellbore maintenance operations. Choose HOCA Oil Tools for your downhole needs, and experience the difference that quality, innovation, and precision can make in optimizing your well performance View Details

MS-251EC Extraction Condensing Steam Turbine

Unlock Unparalleled Efficiency with the Kessels MS-251 EC Extraction Condensing Steam Turbine: Where Precision Meets Power In the ever-evolving landscape of the oil and gas industry, precision, reliability, and sustainability reign supreme. Kessels Steam Turbines is proud to introduce the MS-251 EC Extraction Condensing Steam Turbine, a technological marvel that redefines excellence in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the backbone of industries demanding a constant pressure steam flow for diverse processes. The MS-251 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency Perfected What sets the MS-251 EC apart is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-251 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-251 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-251 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-251 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

4 1/2” Surface-Controlled Subsurface Safety Valve (SCSSSV)

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 4 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) is selected for wells that require dependable emergency shut-in capability while handling moderate to high flow rates. This size is appropriate when production demands a larger flow area to minimize pressure drop and maintain efficient fluid flow. It provides essential well control by automatically isolating the wellbore in cases of equipment failure or loss of surface control pressure, ensuring safety without compromising production efficiency.

This SCSSSV is designed for compatibility with 4 1/2" (114.3 mm) tubing and is available with landing nipple seal bores of 3.437", 3.688", or 3.813". It supports working pressures up to 5,000 psi and comes with internal valve bore options of 1.75", 1.87", and 2.12"—allowing operators to balance flow capacity with safety requirements.

The self-equalizing mechanism minimizes differential pressure across the valve during opening, improving control and reducing mechanical wear. With sealing surfaces located outside the flow path in the open position, the valve is less susceptible to erosion and damage during production.

Constructed with a robust flapper made from bar stock, the valve features a flapper-type mechanism that reliably closes to prevent uncontrolled flow. The valve is wireline retrievable, which allows for extraction and servicing of major components without removing the entire tubing string. This capability reduces intervention time and operational costs, contributing to overall well uptime and efficiency.

View Details

MC Injection Safety Valve 3-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Stickwelder 5001C Series

Wisdom Metal Clip for Hardhat Light

Enhance Your Work Light with the Wisdom Rotatable Metal Clip – Available at Provix Provix is excited to offer the Wisdom Rotatable Metal Clip (model NWI-WLOA-CLIP), a robust and versatile accessory designed for hardhat lights. This metal clip is specifically engineered to enhance the functionality of Cap Light models 2, 3, and 4, making it an indispensable tool for miners, construction workers, and anyone requiring reliable helmet-mounted lighting. Rotatable Design for Optimal Lighting Angle One of the key features of the Wisdom Rotatable Metal Clip is its ability to rotate, allowing users to adjust the angle of their cap light easily. This flexibility is crucial in various work settings, enabling workers to focus light exactly where it's needed, improving visibility and efficiency in tasks. Durable Construction for Tough Environments The Rotatable Metal Clip is made from high-quality metal, ensuring durability and longevity even in the toughest work environments. Its robust construction is designed to withstand the daily rigors of mining and construction work, providing a secure and stable mount for your cap light. Compatible with Multiple Cap Light Models Designed for versatility, this metal clip is compatible with Wisdom Cap Light models 2, 3, and 4. This broad compatibility makes it an excellent accessory for various professionals who use Wisdom lighting equipment. Easy to Install and Use The Wisdom Rotatable Metal Clip is not only durable and versatile but also user-friendly. It can be easily attached to most hard hats, providing a secure and stable base for mounting your cap light. The simplicity of its design ensures that you can quickly set up your lighting without any hassle. A Must-Have Accessory for Professional Lighting Whether you're working underground in a mine, on a construction site, or in any other environment where helmet-mounted lighting is essential, the Wisdom Rotatable Metal Clip is a must-have accessory. It enhances the functionality of your cap light, ensuring you have reliable, adjustable lighting at all times. Get Your Wisdom Rotatable Metal Clip Today Upgrade your cap light setup with the Wisdom Rotatable Metal Clip from Provix. Visit our website at www.provix.net to learn more about this essential accessory and explore our range of high-quality mining equipment. Secure and enhance your lighting with Wisdom's reliable products. View Details

FH Hydrostatic Retrievable Packer

The FH™ is the industry-standard, hydrostatic-set and shear-release single-string retrievable packer. It can be used in the following applications: production, injection, and zonal isolation; single-string selective completions or dual-string completions with multiple packers; deviated wells or other applications when rotation for installation or removal is not beneficial; when it is beneficial to displace and set packers after the well is flanged up; when testing the tubing string before packer setting or to independently set and test individual packers in multiple packer completions is beneficial. The FH packer is hydraulically activated by applying tubing pressure against a plugging device below the packer. The packer requires only straight pull to release. The FHL™ is the large-bore version of the FH packer. Features, advantages and operational procedures are the same as those for the FH packers Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; Baker Hughes low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917) View Details

LM2500+G4 SAC 50Hz CC 1x1 Gas Turbine

The LM2500+G4 SAC 50Hz Combined Cycle 1x1 is a gas turbine system that combines a gas turbine with a steam turbine to improve overall power generation efficiency. This configuration captures waste heat from the gas turbine exhaust and uses it to produce steam, which then drives the steam turbine, generating additional electricity. This approach helps maximize power output while making better use of fuel energy.

Building on the LM2500+ design, the LM2500+G4 increases power capability by about 10% without reducing the lifespan of critical hot section components. This is achieved by increasing airflow, enhancing materials, and improving internal cooling. Despite these upgrades, the core compressor and turbine stages, as well as most airfoil and combustor designs, remain consistent with the LM2500 model.

The LM2500+G4 features a 17-stage high-pressure compressor that raises the engine’s pressure ratio and airflow, boosting the total power output of the gas turbine to over 31 MW. It uses a Single Annular Combustor (SAC) equipped with water injection to help control emissions while maintaining stable combustion. The SAC’s simple, proven design provides uniform flame temperature and reliable operation.

This balanced system is common in industrial and energy applications where efficiency and power output must be optimized, especially under varying ambient conditions. The combined cycle setup offers a reliable and efficient solution for electricity generation in demanding environments.

View Details

Remote Operated Vehicle (ROV) Training Courses

Dive into the Depths: Introducing Subsea ROV Training Courses We believe that the true potential of subsea exploration lies in the hands of skilled professionals. That's why we are excited to announce our comprehensive Subsea ROV Training Courses, designed to equip aspiring ROV operators and seasoned professionals alike with the knowledge and expertise needed to master the art of underwater robotics. Unleash Your Subsea Potential Subsea robotics and Remote Operated Vehicles (ROVs) are revolutionizing the way we explore and interact with the underwater world. Our ROV training courses are crafted to empower individuals with the skills required to navigate ROVs with precision and confidence, ensuring safe and efficient operations beneath the waves. Experience and Expertise The instructors have worked on diverse projects worldwide, ranging from offshore oil and gas installations to scientific research and environmental surveys. Comprehensive Curriculum Our Subsea ROV Training Courses cover a wide range of topics, catering to both beginners and advanced learners. From the fundamentals of ROV piloting and navigation to advanced techniques, troubleshooting, and maintenance, our courses leave no stone unturned in providing a well-rounded education in subsea robotics. Hands-On Learning We understand that practical experience is the key to mastering ROV operations. That's why our training courses feature hands-on learning opportunities with our cutting-edge ROV systems. Participants get to operate ROVs in simulated real-world scenarios, honing their skills under the guidance of our seasoned instructors. Tailored to Your Needs Whether you are an individual looking to kickstart your career in subsea robotics or a company seeking to train your ROV operators, our courses can be tailored to meet your specific needs. We offer both individual and group training options, ensuring that you get the most out of your learning experience. A Gateway to New Opportunities Completing our Subsea ROV Training Courses opens the door to exciting career opportunities in the subsea industry. As the demand for skilled ROV operators continues to grow, our certified graduates are well-prepared to embark on rewarding careers in offshore exploration, marine research, salvage operations, and more. Join the Academy Are you ready to dive into the depths of subsea robotics and ROV operations? Join the Academy and unlock the potential of underwater exploration. Our Subsea ROV Training Courses provide the knowledge, skills, and confidence you need to excel in the world of subsea robotics. Invest in Your Future Invest in your future and become a part of the cutting-edge subsea robotics industry. Contact us today to learn more about our Subsea ROV Training Courses and take the first step toward a fulfilling and adventurous career beneath the waves. The subsea world awaits your exploration! View Details

Fiber Network Backbone Installation

Illuminating the Pathway to Enhanced Connectivity with Nulux: Pioneering Fiber Network Backbone Installation for the Oil & Gas Sector In the intricate labyrinth of the energy sector, wherein seamless data transmission forms the spinal cord of operational efficacy, establishing a robust, secure, and unfettered network backbone becomes imperative. At Nulux Network Solutions, our objective transcends beyond offering mere solutions; we are your partners in navigating through the convoluted pathways of data connectivity and communication within the oil and gas industry, ensuring that the artery of your operations pulsates with vigor, reliability, and sustainability. Sustaining the Future with Fiber Optics Nulux emerges as a beacon of sustainable advancements, offering an array of products, solutions, and services that cascade across the entirety of the energy value chain. We are steadfast in our commitment to guiding our partners in the oil and gas industry towards a future that not only resonates with sustainability but is also interwoven with technological prowess and innovation. Our Fiber Optic solutions symbolize this commitment, ensuring your journey towards a more sustainable future is always illuminated by the consistent, reliable, and efficient transmission of data. The Nulux Fiber Network Backbone Installation The oil and gas industry, characterized by its voluminous data generation, necessitates a network backbone that can shoulder the hefty demands of data transmission with unbridled efficiency and security. Our Fiber Network Backbone Installation service is not merely a technological provision but an embodiment of our expertise, experience, and dedication to ensuring your operations are always in sync with the digital pulse of the industry. Reliable Data Transmission: An uninterrupted flow of operational data is ensured, empowering your operations with real-time analytics, diagnostics, and vital decision-driving data. Fortified Security: Guarding your data against potential breaches and vulnerabilities with a fiber network that is securely fortified, ensuring a safe and secure environment for your data to traverse. Scalability: Our fiber network infrastructure scales in tandem with your operational expanse, ensuring that as your data demands burgeon, our network is always a step ahead in meeting those requirements with equal efficiency and reliability. A Tapestry of Operational Excellence Our Fiber Network Backbone Installation forms the intricate tapestry that interlaces your operational nodes, ensuring that the voluminous data generated is seamlessly integrated, conveyed, and utilized, forming the substrate upon which vital operational strategies and decisions are cultivated and realized. Safeguarding Your Data, Ensuring Its Journey is Unhindered At Nulux, we ensure that the conduit through which your data traverses is not merely operationally optimized but also securely shielded against potential cyber threats and vulnerabilities, fortifying your operational data against breaches and ensuring it navigates through a secure pathway. Join Hands with Nulux Embark on a journey where your operational data is not merely transmitted but is safeguarded, scrutinized, and utilized to shape a future wherein your operations echo with sustainability, operational excellence, and technological advancement. With our Fiber Network Backbone Installation, steer through the digital realms of the oil and gas industry with Nulux, where every bit of data, every decision, and every operational stride is backed by the stalwart reliability and security of our fiber-optic solutions. In a realm where data propels decisions, ensuring its secure, efficient, and unfettered transmission is paramount. Traverse with Nulux, where your data is not merely communicated but empowers your operations towards a future where every decision is data-driven, every operation is efficient, and your journey towards sustainability is continually illuminated by the steadfast glow of our solutions. Your journey towards an operationally efficient and sustainable future begins with Nulux. Let’s navigate through the digital corridors of the oil and gas industry together, ensuring your data navigates through the most secure, reliable, and efficient pathways, crafting a future where technology and sustainability converge to form a symphony of operational excellence. Let’s craft this future, together, with Nulux. View Details

Oil Absorbent Net-Bag Pillows with Handle

Oil Absorbent Net Bags represent a paradigm shift in spill cleanup technology. The unique composition, impressive absorption capacity, and Canadian origin position them as a cutting-edge solution for large spills. As industries continue to prioritize efficiency, cost-effectiveness, and environmental responsibility, Oil Absorbent Net Bags stand at the forefront of progressive spill cleanup methodologies. Oil absorbent Net Bags contain polypropylene strips in a nylon mesh bag. and absorbs up to 10L (2,64 gal) of oil for each bag and repels water. Introduction: Large spills, particularly those involving oil, demand a tailored approach to cleanup. The conventional methods often fall short, necessitating the introduction of specialized tools. Oil Absorbent Net Bags have emerged as a promising solution, offering a combination of advanced materials, superior absorption capabilities, and efficiency in maintenance and disposal processes. Look at the technical design optimizes both absorption capacity and structural integrity because strips of polypropylene, a highly effective oil-absorbing material, are encapsulated within a durable nylon mesh bag. Also, the bag has a high absorption capacity, it stands out to absorb up to 10 liters (2.64 gallons) of oil. This impressive capacity positions it as a reliable and efficient tool for large spill cleanups, minimizing the need for frequent replacements and optimizing resource utilization. A distinctive trait of these net bags is their ability to repel water while selectively absorbing oil. Oil Absorbent Net Bags have proven to be several times more absorbent than traditional methods. The specialized composition enables to outperform alternatives, ensuring a faster and more thorough cleanup process. This not only streamlines the cleanup operation but also translates into lower maintenance costs. The Canadian origin aligns with a culture of environmental responsibility. By choosing Oil Absorbent Net Bags, users contribute to sustainable practices, supporting a product with a minimal ecological footprint. And we ensure that this product meets and exceeds expectations of a good cleanup. Good for the environment and good for you. View Details

7" Mech-1 Single Grip Mechanical Set Packer for 17-20 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Tube Fittings Male Elbow NPT – 1/4”, 5/16”, 3/8”, 1/2", 5/8", 7/8", 1" – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Tube Fittings Male Elbow NPT is a mechanical fitting that provides a 90° connection between tubing and components with National Pipe Taper (NPT) threads. It is designed for use in high-pressure systems with operating pressures up to 6000 PSI.

The elbow configuration allows tubing runs to change direction while maintaining a sealed joint. Threads are tapered in accordance with NPT standards to create a pressure-tight seal when properly installed.

These fittings are produced in a range of sizes from 1/4” to 1” and are manufactured in line with ASME B16.34, MSS-SP-99, and ASME B31.3 requirements. Typical applications include oil, gas, and industrial process systems where tubing must be connected to threaded equipment or piping at an angle.

View Details

SCSSSV Type NE 3-1/2 inch

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog. View Details

MJS Thermal Packer

The MJS™ packer is a compact, high-performance, thermal packer system which offers an expansion joint and a casing packer in a single assembly. The MJS is a rotationally set, double-grip packer, speciically designed for use in steam injection, huff and puff or geothermal production wells, when a wide range of pressures from above or below are anticipated. Please note: Tubing weight and grade must be capable of applying minimum speciied setting torque to the packer. We can source from current stock or direct from the manufacturer. View Details

5 inch WR-SCSSSV Bigbore

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog. View Details

Lead Impression Block

HDI Gauge Batteries, Parts, and Repair Kits

HDI Gauge systems used in oil and gas operations are often exposed to harsh environments and continuous use. To maintain accuracy, reduce downtime, and extend the service life of these systems, it is critical to have access to replacement components that are both durable and compatible. A full range of spare parts is available to support maintenance needs, including displays, sensors, cables, processor boards, connectors, and housing elements.

These parts are designed to be interchangeable across compatible models, allowing operators to replace worn or damaged components without requiring full system replacement. This modularity improves cost efficiency and simplifies logistics, especially in remote field locations. Most components are field-replaceable, reducing the need for specialized service technicians and enabling faster return to operation.

Processor boards and display units typically share a common design across multiple gauge models, streamlining inventory requirements and providing flexibility during urgent repairs. Sensors are matched with gauge heads for calibration accuracy but can be easily re-paired and recalibrated in the field or through service support if needed.

Using certified or manufacturer-specified replacement components ensures continued compliance with safety standards, maintains the expected measurement accuracy, and supports the longevity of the equipment. These parts are often backed by service documentation or part tracking for maintenance records and equipment history management.

In short, a well-organized supply of compatible, high-quality parts is essential for effective pressure and temperature gauge system upkeep in demanding industrial settings.

View Details

Plug with Removable Mandrel

Check Valve Poppet Type – Male x Female 1/2" NPT – 6000 PSI – ISO 9001

The 1/2" poppet type check valve with male × female NPT connections is designed to allow fluid flow in one direction while preventing backflow in oil and gas systems. Its poppet mechanism provides fast response and a positive seal under pressure, protecting pipelines, pumps, and equipment from reverse flow and pressure fluctuations.

The 1/2" size is suitable for medium diameter lines, instrumentation, sampling, and control applications where reliable uni-directional flow is required. Male × female connections enable secure inline installation and integration into existing piping systems without additional fittings, reducing potential leak points and simplifying system layout.

The valve has a standard working pressure of 6000 psi, with optional configurations up to 10000 psi. Selectable cracking pressures range from 1/3 to 25 psi, allowing precise adaptation to system requirements. Construction materials include corrosion-resistant SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, ensuring durability in demanding oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability ensures quality and material verification, and additional testing including vibration, temperature, and helium is available for critical applications requiring high reliability.

View Details

Isolation Packer HP-2 Hydraulic Set 5 1/2" Packer 20-23 PPF

The Ballycatter WC-HP-2 Isolation Packer is a hydraulic-set, single-string tandem packer designed for multiple-zone well completions.

Its primary function is to act as the upper packer in a stacked packer system, working in conjunction with a lower hydraulic retrievable packer to create a sealed isolation zone between them.

This allows for selective treatment, injection, or production within specific well intervals. Additionally, the WC-HP-2 packer can be used to seal off casing holes or perforations, providing an effective solution for low-pressure well applications.

View Details

ROV Remote Operated Vehicle for subsea and dive activities

ROV's are underwater machines that can be used to explore ocean depths while being operated remotely by someone at the waters surface by means of an umbilical. Remote operated vehicles provide high quality images and video of subsea infrastructure and can be used to manipulate valves and tools to operate and maintain oil and gas infrastructure. ROV's are used in a wide range of industrial applications and marine research activities without the challenges experienced by human divers. View Details

Pipe Recovery

Ensuring Continuity with InWaTec Combined’s Electric Line Pipe Recovery Services In the dynamic arena of oil and gas extraction, the unexpected is the only constant. One of the most formidable challenges that can grind operations to a halt is the dreaded scenario of a stuck drill string. Recognizing the critical need for swift and effective resolution, InWaTec Combined offers specialized Electric Line Pipe Recovery Services, designed to address and rectify such downhole dilemmas. When a drill string becomes lodged downhole, it is not just an obstacle; it represents a halt in production, potential damage to resources, and a significant operational cost. InWaTec Combined's Electric Line Pipe Recovery Services are the answer to this industry-wide challenge. Our services employ advanced wireline technology, leveraging the power of electric lines to deliver targeted interventions that free the stuck pipe. Our approach to pipe recovery combines precision-engineered tools with real-time data transmission capabilities. This dual advantage enables our skilled operators to assess the situation accurately and execute recovery procedures with minimal risk to the wellbore or the environment. By integrating our electric line expertise with our pipe recovery operations, we ensure that your drill rig can return to its primary function with minimal downtime. The electric lines play a crucial role; they not only serve as a conduit for the necessary tools to navigate the wellbore but also provide a continuous stream of data back to the surface. This data is critical for making informed decisions during the recovery process, allowing for adjustments and interventions that are precise and situation-specific. At InWaTec Combined, we understand that time is of the essence in such operations. Our Electric Line Pipe Recovery Services are designed for rapid deployment and execution, ensuring that your operations can swiftly transition from a state of suspension to full productivity. Our commitment to innovation, safety, and efficiency is unwavering, as we strive to provide solutions that minimize operational disruptions and maintain the integrity of your wellbore. In the face of stuck pipe challenges, you can count on InWaTec Combined to deliver not just services, but solutions that propel your operations forward. Trust in our expertise to navigate the complexities of downhole recovery, ensuring that your operations remain resilient and robust, no matter what obstacles lie beneath. View Details

7 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

HDI 3300 Temperature Gauge System

The HDI 3300 Temperature Gauge System is an intrinsically safe, battery-powered electronic temperature measurement device commonly used in oil and gas operations requiring precise temperature monitoring. Typical applications include high-pressure nitrogen pumping, geothermal and mud-based drilling, well control manifolds, flare stacks, and bulk liquid storage.

The system consists of a digital gauge display, sensor assembly, and interconnecting cable. The sensor, usually a Resistance Temperature Detector (RTD), is housed in a durable stainless steel case with various mounting options like 2-inch Male NPT, hammer unions, or flanges, allowing flexible installation near the temperature source.

The display features an LCD with numeric and analog bar graph outputs, providing temperature readings with 0.1-degree resolution and ±0.5% full-scale accuracy over a range of -50 to 150°C (-50 to 300°F). Users can switch between Celsius and Fahrenheit. It includes 4-20mA and 0-1 VDC output options for integration with remote monitoring, data logging, or control systems, and supports external power inputs.

Designed for ease of maintenance, the system is field-repairable with a replaceable battery pack. The sensor and display are factory-matched and calibrated, requiring recalibration if components are replaced. The gauge fits standard 6-inch panel cutouts and supports multiple mounting patterns. Cable lengths are customizable up to 200 feet or more.

The system operates reliably in temperatures from -40°C to +70°C and is certified for hazardous environments, with a rugged stainless steel sensor housing to withstand harsh field conditions.

The 3300 is well-suited for environments requiring precise, continuous temperature monitoring, including high-pressure drilling, well control, and fluid storage applications. Its intrinsically safe design provides dependable operation in hazardous locations without compromising safety. The solid-state electronics and durable construction reduce maintenance and downtime, while versatile mounting options allow placement close to the measurement point for accurate readings. Featuring clear numeric and bar graph displays along with remote output capabilities, the system supports timely decision-making and integrates easily with larger monitoring setups, enhancing process control and operational safety in demanding conditions.

View Details

LANAI Remote Operated Vehicle

Lanai ROV - The Ultimate All-In-One Solution for Subsea Operations Everything You Need - Ready to Dive Right In Imagine having all the tools you need at your fingertips, without the hassle of assembling and configuring complex systems. Introducing the Lanai ROV, the epitome of simplicity and efficiency. Designed by ROV operators for operations, the Lanai ROV is here to revolutionize your subsea exploration. Simplicity Meets Capability We understand that time is of the essence in the underwater world. The Lanai ROV comes fully assembled and ready to run straight out of the case, saving you valuable setup time. With a fully integrated console, tether reel, and factory-tested system, you can dive into your work without the need for a laptop. Engineered for Excellence Drawing upon decades of ROV operation experience and leveraging modern manufacturing techniques, we've created a remotely operated vehicle that sets new standards for capability and affordability. The Lanai ROV offers an unparalleled combination of features that will empower your missions. Pack More, Explore More The Lanai ROV's deck space and buoyancy cutouts offer ample room for a variety of payloads, including imaging sonar, scanning sonar, USBL, altimeter, CTD, UT, and Reach Alpha 5F manipulator. You won't need a tooling skid or extra buoyancy, maximizing your operational flexibility. Versatility at Your Fingertips Standard options such as the 125m tether/reel, console, and controller are just the beginning. With the Lanai ROV, you have the freedom to customize your setup with additional choices like the Newton grabber, waterproof transport cases, spare parts/tools, and more. Rest assured with our 2-year warranty - because your peace of mind is our priority. Unlock the Potential of Sonar Exploration With the Lanai ROV, discovering the underwater world has never been more accessible. The Sliding Aluminum Brackets are designed to securely hold a Cerulean Sonar ROVL (USBL), Blue Robotics Ping360 Sonar, DiveNET GPS (LBL), and many other sonars and beacons. Raise and lower the brackets effortlessly with an Allen Key to protect your valuable equipment from potential obstacles. The Power Behind the Performance Unleash the potential of the Lanai ROV with its impressive specifications: • Depth Rating: Dive confidently to 400m, exploring new depths and territories. • Compact and Lightweight: At just 13.0kg in air and dimensions of 559x356x305mm (LWH), the Lanai ROV is highly maneuverable and portable. • Payload Capacity: With a capacity of 2.1kg in freshwater, you can equip your Lanai ROV with a range of essential sensors and tools. • State-of-the-Art Thrusters: Experience precision movements with 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters. • Superior Imaging: Capture the underwater beauty with a 1080 HD IP camera with tilt and four 1,500 Lumen lights for optimal visibility. The Console - Your Command Center Control your exploration effortlessly with the Mini Integrated Console. Boasting a 12in HD monitor (1,200NIT) and fully isolated output with GFCI, it houses an Intel PC with pre-configured software for seamless operations. Unleash the Exploration with Lanai ROV Take charge of your underwater missions with the Lanai ROV. Simplify your operations, maximize your payload options, and explore with confidence. Contact us today to embark on your journey with the Lanai ROV - The Power of Simplicity, Unleashed. View Details

3” Tubing End Locator

The 3” Tubing End Locator is a mechanical downhole tool used to identify the precise end of a 3-inch production tubing string during well intervention operations. It provides a clear physical indication when the tool reaches the bottom of the tubing, helping to ensure accurate placement of equipment inside the well.

Designed specifically for tubing with a 3-inch outer diameter, the tool features a maximum outside diameter of 2.500 inches. This sizing ensures smooth movement within the tubing while maintaining close contact, allowing the tool to operate effectively without the risk of sticking or misalignment. At the core of the design is a spring-loaded finger mechanism that extends outward when the tubing end is reached. This mechanical movement is transmitted to the surface as a tactile response, signaling that the tubing bottom has been contacted.

The tool includes standard threaded connections—such as a 15/16 - 10 UN pin on the top and a 1 - 11 ½ NPT box on the bottom—which makes it compatible with a variety of toolstring configurations. It can be easily incorporated into slickline, wireline, or coiled tubing assemblies without the need for special adapters.

Constructed from durable, corrosion-resistant materials, the tubing end locator is built to perform reliably in downhole environments that involve high pressure, elevated temperature, and exposure to fluids. Its fully mechanical operation ensures a high level of dependability and minimizes the need for maintenance, especially in conditions where electronic systems may not be suitable.

The 3” Tubing End Locator is a practical solution for confirming tubing depth when preparing the well for further intervention.

View Details

LM2500 DLE Gas Turbine

The LM2500 DLE Gas Turbine is an advanced power generation unit designed to deliver high efficiency while significantly reducing emissions. Utilizing cutting-edge Dry Low Emissions (DLE) technology, it precisely controls fuel and air mixing to minimize nitrogen oxide (NOx) emissions.

The LM2500 DLE utilizes a single-rotor gas generator with a 16-stage compressor and a two-stage high-pressure turbine, coupled with cutting-edge DLE combustion technology to reduce nitrogen oxide emissions. It supports dual-fuel operation on a wide variety of fuels, including natural gas, diesel, aviation fuel, LPG, and even hydrogen blends with concentrations ranging from 5% to 95%. The turbine’s open configuration allows for faster maintenance and quicker engine replacement, minimizing downtime.

Its key benefit is utilizing advanced aeroderivative gas turbine technology with dual-fuel Dry Low Emissions (DLE) capability, achieving ultra-low emissions of just 15 ppm NOx on gas fuel, combined with broad fuel flexibility—making it ideal for meeting strict environmental regulations while providing fast, reliable power for dynamic grid demands.

View Details

MS-42 EB Multistage Steam Turbine

Unleash Power and Precision with the Kessels MS-42 EB Multistage Steam Turbine: Your Ultimate Back-Pressure Solution In the high-stakes world of the oil and gas industry, precision and performance are non-negotiable. That's why, at Kessels Steam Turbines, we're proud to introduce our cutting-edge MS-42 EB Multistage Steam Turbine – a powerhouse engineered to redefine excellence in back-pressure turbine technology. Mastering Back-Pressure Turbines Back pressure turbines have been the workhorses of industrial steam applications for decades, and our MS-42 EB takes their capabilities to new heights. Whether it's single-stage or multi-stage options, these turbines serve as the critical bridge between the boiler unit and the process steam header, revolutionizing steam utilization and power generation. Efficiency Redefined Our MS-42 EB Multistage Steam Turbine boasts the hallmark of back pressure turbines: their straight-back pressure nature. This design ensures the efficient harnessing of exhaust steam, meeting process demands with unparalleled precision. Every ounce of electrical power generated is consumed as per the process steam demand, offering unmatched efficiency. Applications Beyond Boundaries At Kessels, we understand that diverse industries have unique demands. That's why our MS-42 EB Multistage Steam Turbine excels in a wide range of applications: Drive Applications: Embrace the power of our turbine in oil and gas operations, sugar mills, sugar fibrizor systems, shredder drives, pump drives, and more. Wherever drive power is needed, Kessels delivers. Power Generation Applications: Elevate your sustainability game by using our turbine to generate electricity, powering generators with clean and efficient steam energy. Bleed Back-Pressure Steam Turbines Our commitment to versatility is evident in the design of the MS-42 EB. With built-in bleed points, uncontrolled extraction vents enable steam extraction within a medium pressure range. This feature proves invaluable in situations where bleeding steam is required at low volume steam demands and when there's a high tolerance for pressure variations. Kessels turbines seamlessly blend the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines When your process steam demand volume is substantial, and you can't compromise on pressure variations, our steam turbines with controlled extraction vents come to the rescue. These turbines operate under intermediate pressure levels, ensuring a steady and reliable steam supply that your operations can depend on. Why Choose Kessels? Choosing Kessels Steam Turbines means choosing a legacy of excellence, innovation, and reliability. Our MS-42 EB Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization and minimize wastage with our precision-engineered turbine. Reliability Redefined: Rigorously tested and built with unwavering precision, the MS-42 EB ensures your operations run seamlessly. Unparalleled Versatility: Adapt to changing needs effortlessly, whether it's drive applications or eco-friendly power generation. Sustainability at Its Core: Harness the power of steam for electricity generation, reducing your carbon footprint and contributing to a greener future. Expert Support: Our team of specialists is always at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-42 EB Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you towards a future of success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Tailor Made Gas Solutions

Tailor-Made Gas Solutions: Your Trusted Partner for Mobile Gas At Lovat Gas Solutions, we understand that every gas-related application is unique. That's why we leverage our extensive experience and expertise to develop tailor-made solutions that perfectly match your specific needs. Whether it's volume, application, duration, or location, we consider all the relevant factors to deliver the best solution for your job. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With years of industry experience, our team has a deep understanding of gas-related challenges and requirements. We have successfully designed and executed numerous projects across various sectors, earning the trust and loyalty of our customers. 2. Customized Approach: We believe in the power of customization. By considering your specific requirements, we develop fit-for-purpose solutions that precisely address your needs. Our solutions are not one-size-fits-all; they are carefully tailored to ensure optimal performance and efficiency for your application. 3. Quality Solutions: Our commitment to quality is unwavering. We take pride in delivering solutions that meet the highest standards of performance, safety, and reliability. When you choose Lovat Gas Solutions, you can trust that our fit-for-purpose solutions will exceed your expectations and deliver exceptional results. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We prioritize open communication and collaboration to ensure that we fully understand your objectives and challenges. Our dedicated team goes the extra mile to provide personalized service and support, making us the first call for our customers whenever they need mobile gas solutions. Contact Lovat Gas Solutions today and discover how we can help you with your mobile gas needs. We are confident that our tailor-made solutions will exceed your expectations, and one job is all it takes for you to experience the excellence of Lovat Gas Solutions. Let us be your trusted partner in delivering exceptional gas solutions that drive the success of your operations. Together, we will find the perfect fit for your gas requirements with Lovat Gas Solutions. View Details

10 3/4" Mech-1 Single Grip Mechanical Set Packer

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

2" Globe-Style Gas Metering Valve

The 2” Globe-Style Gas Metering Valve is designed to provide precise regulation of fuel gas flow in industrial and aero-derivative gas turbines. Its globe valve design offers excellent throttling capabilities, allowing fine control over fuel delivery to maintain the optimal fuel-to-air mixture necessary for efficient combustion. This precise control is crucial for achieving stable turbine performance, reducing emissions, and optimizing fuel consumption.

Constructed with robust materials, the valve is built to withstand the high pressures and temperatures commonly encountered in gas turbine applications. Its durable design ensures long service life and reliable operation even under demanding conditions. The valve features foolproof electrical cables and connectors, enhancing installation safety and reducing the risk of connection errors.

The valve’s compact size and right-angle configuration facilitate straightforward integration into existing turbine fuel systems. Compared to previous models, this valve is an upgrade due to its improved electrical interface and enhanced durability, which reduce maintenance needs and increase operational reliability.

By accurately controlling fuel flow, the 2” Globe-Style Gas Metering Valve helps prevent issues such as flame instability and combustion inefficiency, contributing to smoother turbine operation and lower maintenance costs. It is widely used across various turbine models, including aero-derivative and small- to mid-frame industrial turbines, where precise fuel metering is critical for maintaining performance and compliance with environmental standards.

View Details

WR-SCSSSV 7 inch FXE

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

9 5/8" HP-5 Hydraulic Set Production Packer

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

ROV Field Training

Dive into the Depths: Enhance Your ROV Skills with ROV Field Training As the underwater frontier beckons with mysteries and challenges, subsea robotics is at the forefront of exploring and unraveling its secrets. At Poseidon Robotics, we believe that knowledge and skill are the cornerstones of successful ROV (Remotely Operated Vehicle) operations. That's why we are proud to present our comprehensive ROV Field Training program, designed to equip you with the expertise to navigate the depths with confidence. Unparalleled Hands-On Experience Our ROV Field Training is a unique opportunity to gain hands-on experience in operating and maneuvering advanced underwater robotics. Under the guidance of our seasoned instructors, you will immerse yourself in the world of subsea exploration, learning practical skills that will empower you to conduct successful missions and overcome real-world challenges. Tailored for All Skill Levels Whether you're a seasoned ROV pilot or just embarking on your subsea robotics journey, our training program caters to all skill levels. Beginners will receive comprehensive instruction on ROV basics, including vehicle setup, navigation, and troubleshooting. Experienced operators will have the chance to refine their skills, learn advanced techniques, and master specialized maneuvers. Customized Training for Your Needs We understand that each organization and project is unique. That's why we offer customized training programs tailored to your specific needs. Our team will work closely with you to identify your goals and objectives, ensuring that the training aligns with your requirements. Whether you're in the oil and gas industry, marine research, or environmental conservation, our training program will be adapted to suit your field. In-Depth Learning Modules Our ROV Field Training covers a wide range of critical topics, including: 1. ROV Operation Fundamentals: Understanding the vehicle components, controllers, and communication systems. 2. Navigation and Maneuvering: Mastering piloting techniques, maintaining stability, and performing complex maneuvers. 3. Mission Planning and Execution: Developing effective mission plans and strategies for successful outcomes. 4. Troubleshooting and Maintenance: Learning to identify and address common technical issues to ensure seamless operations. 5. Safety and Risk Management: Understanding safety protocols, emergency procedures, and risk assessment. Empowering Your Team for Success By participating in ROV Field Training, you are investing in the success of your team and your subsea operations. Our mission is to empower professionals like you with the knowledge and skills needed to unlock the full potential of underwater exploration and achieve remarkable results. Join the ROV Field Training Today Don't miss this opportunity to take your ROV expertise to new heights. Reach out to us today to learn more about our training program and how it can elevate your subsea capabilities. View Details

7" Mech-1 Single Grip Mechanical Set Packer for 26-29 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Electric Submersible Pump ESP Packer – 7" – 3,500 PSI

The 7" ESP Packer is a single-mandrel, dual-bore, hydraulic-set production packer set in place using hydraulic pressure applied through the tubing. The dual-bore configuration includes a pass-through section that allows the electric cable to reach the ESP pump below the packer while maintaining isolation between the tubing and the annulus, enabling reliable deployment and operation of the ESP system for artificial lift in oil and gas wells.

The packer has bi-directional, case-carburized barrel slips that anchor it securely against well pressures from both above and below, preventing movement during operation. It can be retrieved with a straight upward pull on the tubing string and is available in both straight-pull and cut-to-release configurations to suit different well conditions.

The packer has a nominal size of 7" and fits 7" casing weighing 26–32 PPF or 7-5/8" casing weighing 55.3 PPF. The outer diameter is 5.970", and the main bore inner diameter is 2.992". The assembly allows up to five feed-through lines for electric cables or injection lines, and the total length is 125".

The body is made from L80 material with HNBR elastomer seals, rated for pressures up to 3,500 PSI and temperatures from 70°F to 300°F. Connections include a 3-1/2", 9.2 PPF VAM TOP box at the top and a 3-1/2", 9.2 PPF VAM TOP pin at the bottom. The release weight is 68,800 lbs. The packer meets API Validation Grade V3 and Quality Level QL1 standards, providing reliable performance under standard service conditions.

These attributes make the ESP packer reliable for high-load applications, adaptable to various completion designs, and efficient in facilitating ESP deployment in oil and gas wells.

View Details

Hydraulic Set Large Bore Retrievable Production Packer

The HPL-1 Large Bore Hydraulic Set Retrievable Production Packer is a high-performance isolation toolactivated using tubing pressure, eliminating the need for mechanical manipulation. When pressure is applied against an underneath plugging device, the hydraulic setting mechanism engages, compressing the multiple packing element system to create a secure seal between the tubing and casing. Designed for versatility, the HPL-1 is available in 7” and 9 5/8” large bore options, making it ideal for high-volume production and injection applications. This design allows the packer to be set at any depth, making it particularly effective in low hydrostatic head wells while ensuring well integrity after the tubing is in place, even in large-diameter casing environments.

Once set, the double-grip system secures the packer in position using hydraulic hold-down pistons and a body lock ring, preventing unwanted movement due to pressure fluctuations or tubing expansion. Themechanically locked setting force ensures that reductions in bottom-hole pressure or tubing contraction do not weaken the seal, providing long-term reliability in production, injection, and zonal isolation applications. With the 7” and 9 5/8” options, the HP-1 is well-suited for high-flow rate completions, offering exceptional sealing performance and operational efficiency in larger casing sizes.

To retrieve the packer, operators can apply a straight upward pull, or, if equipped with the optional right-hand rotational release, use torque combined with a shear release mechanism. This flexibility allows for efficient removal in both standard and deviated wells, making the HP-1 packer a versatile, high-capacity solution for a wide range of completion designs, including large-bore well systems requiring robust isolation and retrieval capabilities.

View Details

Pulling Tools for Internal Fishing Necks

Maximize Your Downhole Retrieval Success with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the specialized and high-stakes environment of oil and gas exploration and production, the right tools can make a significant difference in operational efficiency, safety, and cost-effectiveness. Recognizing the industry’s needs, HOCA Oil Tools introduces its line of Internal Fishing Neck Pulling Tools, expertly designed to address the challenges of downhole tool retrieval. Our products stand as a testament to our commitment to innovation, offering precision-engineered solutions to enhance your downhole operations. HOCA’s Internal Fishing Neck Pulling Tools: Precision-Engineered for Optimal Performance Crafted for the safe and efficient retrieval of downhole equipment with internal fishing necks, HOCA Oil Tools' Internal Fishing Neck Pulling Tools are essential for any downhole operation requiring tool retrieval. Engineered with the highest standards of quality and precision, these tools are designed to securely latch onto internal fishing necks, providing a reliable grip for retrieval without causing damage to the wellbore or the tools themselves. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means selecting a partner dedicated to enhancing the efficiency and safety of your downhole operations. Our commitment to quality, innovation, and customer service ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your operational toolkit positions your projects for greater success, offering the reliability and efficiency needed to tackle the complexities of modern downhole activities. With HOCA Oil Tools, you gain more than just a product; you gain a strategic advantage in your downhole operations, backed by our expertise and support. Opt for HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who trust our Internal Fishing Neck Pulling Tools to enhance their operational capabilities. Elevate your downhole operations with HOCA Oil Tools – where technology, precision, and reliability converge to drive your success. View Details

Plug with Equalizing Prong and Valve Sub-Assembly

HOCA Oil Tools: Revolutionizing Downhole Operations with Plug with Equalizing Prong and Valve Sub-Assembly In the dynamic and demanding world of downhole operations within the oil and gas industry, the quest for innovation, efficiency, and safety is relentless. HOCA Oil Tools, a leading provider of specialized downhole slick line tools, meets this challenge head-on with our advanced Plug with Equalizing Prong and Valve Sub-Assembly. This tool is meticulously designed to enhance the functionality and safety of downhole operations, providing a solution that is both versatile and reliable. HOCA’s Plug with Equalizing Prong and Valve Sub-Assembly: Tailored for Optimal Performance Our Plug with Equalizing Prong and Valve Sub-Assembly is engineered for precision and durability, designed to address the complex needs of modern downhole activities. This innovative tool combines the functionality of a plug for secure sealing and isolation with the added advantage of an equalizing prong and valve mechanism. This integration allows for controlled pressure equalization, crucial in preventing potential downhole complications and ensuring the safety of the well and personnel. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Plug with Equalizing Prong and Valve Sub-Assembly means opting for a product that stands at the confluence of innovation, quality, and safety. We are committed to providing solutions that not only meet the current demands of the oil and gas industry but also anticipate future challenges, ensuring our clients are equipped for success. Integrating our advanced plug assembly into your downhole operations signifies a move towards enhanced efficiency, safety, and control. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your operational goals with cutting-edge solutions and comprehensive service. Select HOCA Oil Tools for your downhole needs and leverage the advantages of our Plug with Equalizing Prong and Valve Sub-Assembly to optimize your operational outcomes. Partner with us and step into a new era of downhole operations, where efficiency, safety, and performance are paramount. With HOCA Oil Tools, empower your downhole activities with tools that redefine industry standards and drive your success in the competitive oil and gas landscape. View Details

9 5/8" Hydraulic Set Large Bore Retrievable Production Packer

HPL-1 Hydraulic Set Retrievable Production Packer – Large Bore Design for 9 5/8” Casing

The HPL-1 Hydraulic Set Retrievable Production Packer is a large-bore, hydrostatic-set, double-grip packer engineered for 9 5/8” casing, providing enhanced flow capacity and efficient wellbore isolation for production, injection, and zonal isolation applications. Designed to maximize flow efficiency while maintaining well integrity, this packer is set hydraulically by applying tubing pressure, eliminating the need for mechanical tubing manipulation. The expanded internal diameter minimizes flow restrictions, making it an ideal solution for high-rate production and injection wells. Once set, the multiple packing element systemensures a mechanically locked, long-lasting seal, maintaining pack-off force throughout its operational life.

To prevent movement under differential pressure, the hydraulic hold-down pistons engage after setting, while the body lock ring secures the setting force, ensuring bottom-hole pressure variations or tubing contraction do not affect the seal. The large bore design allows for unrestricted flow paths, improving overall reservoir performance and artificial lift system efficiency. This makes it particularly valuable in ESP, gas lift, and other high-flow applications, where maintaining maximum production rates is critical.

For retrieval, operators can use a straight upward pull or an optional right-hand rotational release for controlled removal, reducing the risk of stuck tools and minimizing intervention time. With its high-capacity flow path, secure hydraulic setting, and efficient retrievability, the HPL-1 packer for 9 5/8” casing is an optimal solution for operators looking to enhance well performance, reduce pressure losses, and maintain long-term well integrity.

View Details