Ballycatter.ca - Industrial Equipment

The T5.4 thermocouple is a temperature-sensing probe used in LM2500 gas turbines to measure exhaust gas temperature (EGT). The label T5.4 refers to its specific position in the turbine\'s exhaust thermocouple array—zone T5 (turbine exhaust), sensor 4. These sensors are part of a system that monitors thermal conditions at multiple points in the exhaust stream.

This thermocouple operates in high-temperature environments, withstanding continuous exposure up to approximately 1100°C. It is built to maintain accuracy and reliability under the thermal stress and vibration typical in gas turbine applications.

T5.4 thermocouples are often used with flexible

harness systems. This allows operators to replace individual probes without removing the entire harness, improving maintenance efficiency and reducing downtime.

By providing real-time exhaust temperature data, the T5.4 thermocouple supports engine control, performance optimization, and safety monitoring in industrial gas turbine operations.

View Details

Ball Valve Panel Mounted – 2-Way Female x Female End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Panel Mounted Ball Valve, 2-Way Female × Female, is an isolation valve designed to control, start, or stop fluid flow in oil and gas piping systems. Its 2-way configuration allows flow in either direction between two ports, providing reliable on/off operation for process lines, sampling, injection systems, or bypass lines.

The female × female connections provide secure inline installation without the need for additional fittings, reducing potential leak points and simplifying system integration. The panel-mounted design enables operation from a control panel, making it suitable for applications where multiple valves are centralized or access to the pipeline is limited.

The valve features a floating ball design that ensures leak-proof shut-off under high-pressure conditions. Operation is achieved via a quarter-turn handle, which indicates flow direction and allows fast, low-torque control. The three-piece construction facilitates easy installation, maintenance, and replacement of internal components. It is factory tested for seat and stem leakage and is available in a range of corrosion-resistant materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs make it suitable for demanding industrial environments.

View Details

Marine Oil Only Absorbent Spill Kit 4.6-gallon Bag

The absorbent spill kit 4.6-gallon bag contains, 5 Pads 8’ x 11.5” 1 Sorbent Sock 3” x 4ft 1 Bilge 1 Pair Nitrile Gloves 1 Disposal Bag Part number: OH-OOS-BO Use for small spills inside boats and near boat launches. Using an Oil Only Absorbent Spill Kit in a 4.6-gallon bag highly recommended for marine environments. It ensures that you are equipped to address oil spills swiftly and effectively, protecting the marine environment and complying with regulations. 5 Pads 8’ x 11.5” This package includes five absorbent pads, each measuring 8 feet by 11.5 inches. These pads are made for effective liquid cleanup, offering versatility and practicality. These pads are suitable for quick and efficient absorption of liquids, including oils and hydrocarbons. Their compact size and absorbent properties make them an ideal solution for managing spills in diverse industrial, automotive, and emergency response scenarios. 1 Sorbent Sock 3” x 4ft This package comprises a single Sorbent Sock, measuring 3 inches in diameter and 4 feet in length. The sock is made for efficient containment and absorption of liquid spills, particularly oil-based substances. Its mouldable and adaptable nature allows it to conform to different surfaces, making it versatile for diverse spill response applications. Whether used as a standalone solution or as part of a spill kit, this Sorbent Sock provides a targeted and effective response to spills. 1 Bilge A specific component designed for managing bilge water in a marine setting. The bilge component includes absorbent materials tailored for addressing water contaminated with oil or other hydrocarbons in a boat's bilge. This ensures a comprehensive solution for various spill scenarios that might occur on a boat. 1 Pair Nitrile Gloves This package includes 1 pair of Nitrile Gloves, a crucial component of personal protective equipment. Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. 1 Disposal Bag Includes 1 Disposal Bag, essential for the proper containment and disposal of used absorbent materials and contaminated items. Disposal Bag is employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. The absorbent spill kit in a 4.6-gallon bag is a complete package for marine use as it incorporates a range of components designed to address spills effectively and safely, whether they involve oil, fuel, or bilge water, ensuring a comprehensive and responsible spill response on boats and ships. View Details

2.5″ Butterfly Bleed Air Valve

The 2.5″ Butterfly Bleed Air Valve is a critical component in the LM2500 gas turbine, responsible for regulating the flow of bleed air—compressed air extracted from the turbine’s compressor stage. This valve helps control internal pressures and temperatures, which is essential to maintain safe and efficient turbine operation.

The valve has an effective flow area of 2.5 square inches, allowing it to manage airflow precisely in smaller turbine setups or space-restricted environments. Its butterfly-shaped disc is permanently attached to the shaft, which ensures consistent movement and reliable control of air flow with minimal play or slippage.

One important feature is its fast response time—less than 320 milliseconds to complete a full open or close stroke. This quick action enables the turbine control system to rapidly adjust pressure levels, preventing overheating and reducing mechanical stress on turbine components.

The valve’s bearing shaft is robustly designed to handle frequent small movements, known as dither cycles, without premature wear. The bearings themselves are specifically engineered to support these high-cycle conditions, improving the valve’s durability and lifespan.

By efficiently managing bleed air, this valve helps protect the turbine from excessive pressure build-up and thermal stress, which can otherwise lead to damage or reduced efficiency. Its design also allows installation without requiring changes to the turbine’s hydraulic or electrical systems, making it suitable for retrofits or upgrades on existing LM2500 turbines.

In summary, the 2.5″ Butterfly Bleed Air Valve plays a vital role in controlling compressor bleed air in LM2500 turbines, balancing safety, performance, and durability within compact or smaller turbine applications.

View Details

BMS Versol B

Introducing BMS VerSol B: The Perfect Replacement for Harmful Chemicals Cleanstream is proud to present BMS VerSol B, an environmentally friendly alternative to standard solvents like D-Limonene, Dearomatized hydrocarbons, and Perchloroethylene. We understand the negative impact that harmful chemicals have on our planet and that's why we have developed a product that is not only effective but also safer for the environment. With BMS VerSol B, you can say goodbye to traditional solvents and hello to a more sustainable future. BMS VerSol B is a chemical product that provides a more environmentally conscious alternative to D-Limonene. It's a perfect replacement for all your solvent needs, providing exceptional cleaning performance without the environmental hazards of traditional solvents. Whether you're a small business owner or a large industrial company, BMS VerSol B is the right choice for you. By choosing our product, you're taking a step towards reducing your costs and making a positive impact on the environment. At Cleanstream, we are committed to creating a sustainable future, and we believe that BMS VerSol B is just one of the many ways we can contribute to a cleaner, greener planet. So what are you waiting for? Make the switch to BMS VerSol B today and experience the benefits of a safer, more eco-friendly solvent. Contact us to learn more about how you can get started with BMS VerSol B. View Details

Multi-Process 5001 All-in-One Welder

Canaweld: Your All-In-One Solution for Oil and Gas Welding When it comes to welding machines and accessories for the oil and gas industry, Canaweld stands out as a leading expert. Our multi-process welding machines are designed to cater to all your welding needs, providing a comprehensive range of capabilities to handle various welding processes with ease. From MIG welding to TIG welding, Stick welding to Flux Cored welding, our multi-process welders are the ultimate all-in-one solution for your welding projects. Unmatched Variety, Unbeatable Quality At Canaweld, we take pride in offering a wide range of multi-process welders to meet the diverse needs of the oil and gas industry. Our production lines include industrial heavy-duty multi-process welders, high-tech (programmable, LCD panel, Synergic, or pulse) multi-process welders, and portable multi-process welders. Whatever your welding requirements, we have the perfect welding machine to match your needs. Versatility to Handle Various Materials Our multi-process welders are engineered to tackle a wide range of materials commonly used in the oil and gas industry. From mild steel and stainless steel to aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys, our machines are equipped to handle it all. Professional-Grade Wire-Feeding Mechanisms We understand that a robust and reliable wire-feeding mechanism is crucial for seamless welding operations. That's why all our multi-process welders are equipped with professional, heavy-duty wire-feeding mechanisms to ensure smooth and consistent wire feed, reducing downtime and improving efficiency. Introducing the Multiprocess 5000: The Workhorse for Medium to Heavy-Duty Applications The Multiprocess 5000 is a powerful 400-Amps welding machine that takes welding to a whole new level. Capable of Stick welding, MIG welding, Flux cored welding, or TIG welding with a lift start, this robust and reliable workhorse is the perfect companion for all your medium to heavy-duty applications. Engineered for Tough Conditions Designed to withstand the harshest conditions, the Multiprocess 5000 is a true workhorse. Its heavy-duty, robust design ensures reliability, making it a dependable partner in the most demanding environments. Unparalleled Performance With high power at 100% duty cycle and tested in extreme temperatures of 104°F/40°C and 140°F/60°C, the Multiprocess 5000 delivers exceptional welding quality, precise arc striking, and a highly stable arc. Its fully encapsulated PCB protects against dust contamination, ensuring continuous performance even in challenging conditions. Optimal Welding Control The Multiprocess 5000 features automatic compensation for main power fluctuations within ± 20% and electronic continuous control of inductance, ensuring trouble-free welding and excellent CC/CV characteristics. Whether you're engaging in MIG/MAG, Flux-cored, or Stick welding (MMA), this machine offers exceptional welding characteristics. User-Friendly and Worry-Free Setting parameters is a breeze with the Multiprocess 5000's user-friendly design. It includes initial and final crater control for precise welding results and comes with a comprehensive 3-year warranty, giving you peace of mind and confidence in your investment. Choose Canaweld: Your Trusted Welding Partner Experience the power, versatility, and reliability of Canaweld's multi-process welding machines. From the oil and gas industry to various industrial applications, our welding solutions have been trusted by professionals worldwide. When it comes to welding machines and accessories, Canaweld is the name you can trust. Unlock the potential of your welding projects with Canaweld's cutting-edge technology and exceptional performance. Invest in a welding machine that delivers superior results and choose Canaweld for all your welding needs. View Details

G Compression set Retrievable Packer

The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. C-1 Single Grip Invertible Packer The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. View Details

Subsurface Direct Controlled Safety Valve 4.26 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Storm Choke WI Valve 3.97 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

4 1/16 inch Gate Valve rated to 5000 psi operating pressure

Gate valves are an energy-efficient valve option, as the movement direction or ram is perpendicular to the media flow direction. As a result, less power is consumed when opening or closing the gate valves in comparison to globe valves. Due to their energy-efficiency, they help reduce total ownership cost. View Details

Service Rig for well servicing activities on onshore wells in any location

Service rig suitable for well interventions, workers, abandonments, and completion activities. Rigs can be sized for specific well campaign requirements with valid safety case for jurisdiction. Cost effective alternative to larger drilling rigs or hydraulic worker units for a wide range of activities. Well maintained rig fleet staffed by oil and gas industry professionals providing top notch service and flexibility in location and activities. Able to be deployed in any geographic area with a focus on project results. View Details

ESP 9 5/8” Production Packer

Electrical Submersible Pump Packer

A downhole Electric Submersible Pump (ESP) Packer for a 9 5/8” casing is a critical component in artificial lift systems, designed to provide a secure, pressure-tight seal between the tubing and casing while allowing the electrical cable to pass through to the ESP. Here’s how it works:

1. Hydraulic-Set, Dual-Bore Design

This single-mandrel, dual-bore packer is hydraulically set by applying fluid pressure through the tubing. This eliminates the need for mechanical manipulation, making it an effective choice for deviated or high-angle wells where mechanical setting might be challenging.

• The dual-bore design incorporates a dedicated pass-through bore, allowing the power cable to run from the surface, through the packer, and down to the ESP below.

• This configuration enables uninterrupted power delivery to the pump while maintaining zonal isolation in the wellbore.

2. Bi-Directional Slip System for Secure Anchoring

Once hydraulic pressure is applied, the case-carburized bi-directional slips engage against the casing wall.

• These slips are hardened to withstand high loads and anchor the packer firmly in place to resist both upward and downward forces caused by reservoir pressure fluctuations and ESP-induced pressure differentials.

• This ensures that the packer remains securely in position, preventing unintended movement during production or shutdown cycles.

3. Versatile Release and Retrieval Mechanism

When it’s time to retrieve or replace the ESP system, the packer features a flexible release system:

• The standard retrieval method involves applying a straight upward pull on the tubing, which disengages the slips and allows the packer to be removed.

• Alternatively, for applications where higher retrieval forces might be impractical, a cut-to-release option is available, enabling efficient removal in more challenging well conditions.

Operational Advantages

• Reliability in High-Load Applications: Designed to handle the extreme downhole conditions associated with ESP operations, including high fluid flow rates and pressure fluctuations.

• Adaptability to Various Completion Designs: The dual-bore configuration accommodates different ESP setups and cable-routing requirements.

• Efficiency in ESP Deployment: By securely isolating production zones while allowing cable pass-through, the packer streamlines the ESP installation process and enhances system integrity.

This ESP packer plays a vital role in ensuring reliable artificial lift performance, particularly in deep or high-pressure wells where stable downhole conditions are essential for maximizing production efficiency.

View Details

HP-3 Hydraulic Set High Angle 9 5/8" Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

WI Water Injection Valve 1.75 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

4-1/2 inch Type MC Water Injection Safety Valve

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

4 1/2” Surface-Controlled Subsurface Safety Valve (SCSSSV)

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 4 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) is selected for wells that require dependable emergency shut-in capability while handling moderate to high flow rates. This size is appropriate when production demands a larger flow area to minimize pressure drop and maintain efficient fluid flow. It provides essential well control by automatically isolating the wellbore in cases of equipment failure or loss of surface control pressure, ensuring safety without compromising production efficiency.

This SCSSSV is designed for compatibility with 4 1/2" (114.3 mm) tubing and is available with landing nipple seal bores of 3.437", 3.688", or 3.813". It supports working pressures up to 5,000 psi and comes with internal valve bore options of 1.75", 1.87", and 2.12"—allowing operators to balance flow capacity with safety requirements.

The self-equalizing mechanism minimizes differential pressure across the valve during opening, improving control and reducing mechanical wear. With sealing surfaces located outside the flow path in the open position, the valve is less susceptible to erosion and damage during production.

Constructed with a robust flapper made from bar stock, the valve features a flapper-type mechanism that reliably closes to prevent uncontrolled flow. The valve is wireline retrievable, which allows for extraction and servicing of major components without removing the entire tubing string. This capability reduces intervention time and operational costs, contributing to overall well uptime and efficiency.

View Details

Injection Valve Subsurface Safety 4.48 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Professional Hand Controller

6″ Butterfly Bleed Air Valve

The 6″ Butterfly Bleed Air Valve is designed to regulate the flow of compressed bleed air from the compressor section of large gas turbines, such as the LM2500. This valve uses a butterfly-shaped disc permanently attached to a robust shaft, allowing precise control over airflow to reduce pressure and temperature within the turbine system.

With an effective flow area of 19.1 square inches max, this valve accommodates higher volumes of bleed air, making it suitable for turbines with greater airflow requirements. It features a fast response time—less than 320 milliseconds for a full stroke—ensuring timely adjustments to changing operating conditions. The valve’s bearings are engineered for high cycle service, providing durability and reliability even under frequent opening and closing cycles.

The 6″ valve helps protect turbine components by managing thermal loads and maintaining optimal compressor performance, which in turn improves overall turbine efficiency and extends equipment life. It is commonly used in oil and gas applications where maintaining safe, efficient, and reliable turbine operation is critical. This valve also serves as a drop-in replacement in existing turbine systems, requiring no hydraulic or electrical modifications, simplifying installation and reducing downtime.

View Details

HP-3 Hydraulic Set High Angle 7" 29-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Point to Point (P2P) and Multipoint Radio Networks

Navigating the Oil and Gas Industry's Communication Challenges: A Spotlight on Nulux's P2P and Multipoint Radio Networks The expansive terrains and remote operation sites intrinsic to the oil and gas industry have perennially posed a daunting challenge: Ensuring stable, secure, and robust communication across vast distances and through obtrusive terrains. At Nulux Network Solutions, we deliver pioneering wireless infrastructure solutions, particularly focusing on Point to Point (P2P) and Multipoint Radio Networks, ensuring that your teams, whether in the office or in the field, are never out of sync. Understanding the Nuances: P2P and Multipoint Networks In the vast expanses where the oil and gas operations unroll, the requirement for crisp and clear communication is pivotal. It is imperative to understand the differential utility of P2P and Multipoint networks, especially in an industry where both localized and widespread communications are equally critical. Point to Point (P2P) Networks: Facilitating a dedicated data link between two distinct points, P2P networks are synonymous with secured, streamlined, and rapid communication, usually empowered by a dedicated line, ensuring that data integrity and security are never compromised. Multipoint Networks: Contrasting with P2P, multipoint networks allow a single communication line to interlink more than two points, ensuring that a centralized communication hub can effectively communicate with multiple nodes in a network. Unlocking Unparalleled Advantages with Nulux The choice between P2P and Multipoint networks isn’t binary but is instead driven by the unique operational requisites of your establishment. Fortified Productivity: The capability to ensure that every node, every team member is always in the loop, effectively eliminating communication bottlenecks and fostering enhanced productivity and decision-making prowess. Bolstering Security: Especially with P2P networks, where the communication link is exclusive and dedicated, the risk of data interception or unauthorized access is minimized, ensuring that your data flows securely. Cost-Effective Scalability: In terrains or circumstances where laying physical communication lines is implausible or exorbitantly expensive, our wireless networks offer a scalable, cost-effective alternative. Dedicated to Driving Innovation in Wireless Communication As technology evolves, so does the complexity and scale of oil and gas operations. Nulux, with a rich tapestry of experience in designing and implementing wireless systems, is at the forefront, engineering solutions that not only cater to the present but are also agile enough to adapt to future demands and technological evolutions. Our commitment goes beyond merely delivering solutions. We aspire to be partners in your journey, ensuring that as your operations expand, scale, and evolve, your communication infrastructure is not just a silent spectator but a dynamic enabler, effortlessly adapting and scaling to meet your growing needs. In a realm where every second count, where the magnitude of decisions is colossal, and where communication isn’t merely a need but a critical operational requisite, Nulux Network Solutions stands as a beacon of innovative, reliable, and secure wireless communication solutions. Connect with us, and let’s script the future of wireless communication in the oil and gas industry, together. View Details

Offshore Mini Coil Unit

Navigating Offshore Challenges with InWaTec Combined’s Offshore Mini-Coil Services Offshore oil and gas operations come with a unique set of logistical challenges. In the face of limited deck space and crane capacity, traditional coiled tubing units (CTUs) often fall short in providing the necessary services without compromising operational economics. InWaTec Combined rises to the occasion with our Offshore Mini-Coil Services, designed to deliver efficient, cost-effective well intervention and maintenance solutions in even the most constrained offshore environments. Compact Efficiency: Our capillary/mini-coil CTU is a game-changer for offshore operations. Its compact design minimizes the footprint on the deck, providing a practical alternative to bulkier traditional units. This space-efficient solution is crucial on platforms where every square foot counts. Lift and Load Advantages: The lightweight nature of our Mini-Coil CTU addresses the common challenges of crane limitations. With the reduced load requirements, our Mini-Coil equipment can be easily maneuvered and set up, facilitating a range of well services without the need for heavy lifting equipment. Versatile Applications: Despite its compact size, the Mini-Coil CTU is robust in capabilities. It's adept at a multitude of tasks, from precision interventions like chemical treatments and scale removal to essential maintenance procedures and even wellbore cleanouts. Economic Solution: InWaTec Combined’s Offshore Mini-Coil Services are not just operationally advantageous; they also present significant cost savings. The reduced logistical demands coupled with the efficiency of our Mini-Coil operations translate into a more economical approach to servicing wells offshore. Customized Service Delivery: Understanding that no two wells or offshore platforms are the same, we offer customized Mini-Coil solutions tailored to the specific requirements of each operation. Our team of experts meticulously plans every aspect of the service delivery, ensuring that it aligns perfectly with our clients' operational and economic objectives. At InWaTec Combined, we are committed to innovation and excellence in offshore well services. Our Offshore Mini-Coil Services embody this commitment, providing operators with the assurance that even under the constraints of limited deck space and crane capacity, their wells can be serviced efficiently and effectively. Choose InWaTec Combined for your offshore well interventions, and experience the strategic advantage of our Offshore Mini-Coil Services. We are dedicated to optimizing your operations, ensuring that your offshore wells maintain peak performance with minimal disruption. Let us bring our compact, powerful solutions to your platform, where space is at a premium, but potential is limitless. View Details

Valve Manifolds 2 Valve Manifold R Type – Integral Mount 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The R Type 2 Valve Manifold Integral Mount 1/2” Female NPT is a compact and robust solution for connecting impulse lines directly to pressure transmitters or gauges. It features a simple two-valve arrangement that allows operators to block process pressure, safely bleed trapped pressure, and calibrate transmitters without the need for additional piping. This configuration ensures quick and efficient maintenance and reduces potential leak points.

Its integral mount design allows the manifold to be attached directly to the transmitter, eliminating the need for extra brackets or complex assemblies. This not only saves space but also provides a secure and stable connection, which is particularly useful in oil and gas applications where reliability under high-pressure conditions is critical.

The manifold is constructed with a metal-to-metal body and bonnet seal to handle pressures up to 6000 PSI, with higher pressure options available upon request. It is fully factory tested for seat and packing leakage, and materials can be supplied to meet NACE MR 01 75 standards. The R Type is suitable for a wide temperature range and is designed to provide smooth operation, long-term durability, and leak-free performance even in demanding field conditions.

View Details

CBL-VDL

Elevating Well Integrity Analysis with InWaTec Combined's CBL-VDL Services Ensuring a solid cement bond between casing and the wellbore is not just a procedural step; it's a critical factor in well integrity that demands the most meticulous evaluation techniques. InWaTec Combined’s Cement Bond Logging (CBL) and Variable Density Logging (VDL) Services offer a refined approach to acoustic well logging, a method that has been a research focal point due to its importance in ascertaining well safety and functionality. Cement bonding evaluation can be segmented into two categories based on tool source frequency: the sonic method (around 20 kHz) and the ultrasonic method (several hundred thousand Hz). The sonic method, a technique that has stood the test of time since its introduction in 1963, provides a qualitative or semi-quantitative analysis of the cement bond. It involves the excitation of a sonic wave and measurement of its attenuation along the borehole axis, with the degree of attenuation reflecting the quality of shear coupling behind the casing. Simply put, the greater the attenuation, the better the bond. CBL specifically focuses on the attenuation factor derived from the first arrival amplitude, offering a snapshot of the bond's integrity. In contrast, VDL takes into account the full waveform amplitude, providing a more detailed and denser representation of the bond quality. These dual measurements, with industry-standard receiver spacings of 3-ft for the casing wave and 5-ft for the full wave, allow for a comprehensive analysis of the cement bond. InWaTec Combined's CBL-VDL Services employ these methodologies with precision-engineered tools that capture high-resolution data, enabling our experts to discern even subtle variations in bonding conditions. This data is not merely numbers on a log; it's a story of the well's integrity, revealing areas of potential concern that can be proactively addressed to prevent non-productive time and ensure operational safety. By leveraging the combined strengths of CBL and VDL, InWaTec Combined provides clients with a robust assessment of their cementation quality. The detailed logs produced not only satisfy regulatory requirements but empower operators with actionable insights to optimize their well construction and maintenance strategies. Choose InWaTec Combined's CBL-VDL Services for your cement bond evaluation needs and gain peace of mind with our thorough, reliable, and cutting-edge acoustic logging solutions. Our commitment to excellence in well logging means that when it comes to well integrity, you're not just meeting industry standards—you're setting them. View Details

7" Mech-1 Single Grip Mechanical Set Packer for 17-20 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

LM2500 SAC Gas Turbine

The LM2500 SAC Gas Turbine features a Single Annular Combustor (SAC) system—a type of combustion chamber where fuel and air are mixed and burned in a single, annular-shaped chamber. This design allows for efficient combustion with lower emissions and better fuel-air mixing. The turbine also supports dual-fuel capabilities, operating on both gas and diesel, offering greater flexibility in environments where fuel availability may vary.

Its open configuration is designed for accessibility, making maintenance tasks faster and more straightforward. This also allows for quicker engine removal or replacement, helping reduce downtime during service operations.

The LM2500 SAC is widely used across multiple industries, including electrical power generation, mechanical drive systems, and marine propulsion, due to its reliability, fuel flexibility, and proven performance in demanding conditions.

View Details

Ball Valve Panel Mounted – 2-Way Tube OD Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

This 2-way panel-mounted ball valve with Tube OD connections is designed to control, start, or stop fluid flow in oil and gas tubing systems. Its 2-way configuration allows fluid to flow in either direction between two ports, providing reliable on/off operation for pipelines, sampling lines, injection systems, or bypass lines.

The Tube OD connections allow direct attachment to tubing without additional fittings, simplifying installation and reducing potential leak points. The panel-mounted design enables operation from a control panel, making it suitable for systems where multiple valves are centralized or where physical access to the tubing is limited.

The valve features a floating ball design that ensures leak-proof shut-off under high-pressure conditions. Standard working pressure is 6000 PSI. It is designed and tested to ASME B16.34 for pressure-temperature ratings, and valve ratings follow ASME Process Piping Code B31.3. The valve has been type tested to MSS-SP-99 and offers a temperature range from –40 °F to 450 °F (–40 °C to 232 °C).

Operation is simple with a quarter-turn handle, providing fast, low-torque control. The three-piece construction allows easy installation and maintenance, including replacement of internal components. Each valve is factory tested pneumatically with nitrogen gas at 1000 psig for seat and stem leakage, with a maximum allowable leak rate of 0.1 sec/min. Optional additional tests, such as vibration, temperature, and helium, are available.

The valve is available in a range of corrosion-resistant materials, including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs makes it suitable for demanding industrial environments. Heat code traceability ensures material verification and quality assurance.

View Details

Alternative Energy Solutions

Unlocking Profitable Alternative Energy Solutions: Mobile, Reliable, and Environmentally Responsible Lovat Gas Solutions is your trusted partner in developing profitable alternative energy solutions. We understand the importance of coordinating a dedicated team of experts and resources to deliver innovative, mobile, reliable, and environmentally responsible solutions that assist our clients and partners in their transition to new energy paradigms. With a key focus on safety, we are committed to helping you achieve your energy goals while maximizing profitability. Why choose Lovat Gas Solutions for your alternative energy needs? 1. Coordinated Expertise: Our team of skilled professionals brings together expertise from various disciplines to provide a comprehensive approach to alternative energy solutions. We coordinate the efforts of our talented individuals and resources to ensure seamless execution and deliver high-quality results. 2. Mobile Solutions: We recognize the importance of mobility in the ever-evolving energy landscape. Lovat Gas Solutions offers mobile energy solutions that can be easily deployed and adapted to your specific requirements. Whether it's mobile power generation, off-grid solutions, or energy storage, we have the flexibility to meet your needs. 3. Reliability: We understand that reliability is a critical factor in the success of your alternative energy projects. Our commitment to delivering reliable solutions is ingrained in every aspect of our work. You can rely on our expertise and experience to provide solutions that consistently meet your energy demands. 4. Environmental Responsibility: At Lovat Gas Solutions, we prioritize environmental responsibility in all our endeavors. Our alternative energy solutions are designed to minimise carbon emissions, reduce environmental impact, and contribute to a sustainable future. We take pride in helping our clients transition to cleaner energy sources with a focus on sustainability. Partner with Lovat Gas Solutions to unlock profitable alternative energy solutions. We are dedicated to understanding your unique energy needs, designing innovative solutions, and delivering tangible results. Whether you require short-term solutions or long-term strategies, our team is here to support your transition to new energy frontiers. Contact us today to discuss your alternative energy goals. Let our experienced team guide you through the process, providing you with mobile, reliable, innovative, and environmentally responsible solutions that drive profitability and contribute to a greener future. Trust Lovat Gas Solutions to be your partner in successful alternative energy initiatives. View Details

Supply Vessels for Offshore Support

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

10-3/4 Annulus Safety Valve

The AV annulus safety valve is a fully retrievable high performance annulus safety system packer with integral annulus safety valve. The system provides annular bypass through a hydraulically operated poppet valve. The AV system is run in a single trip in conjunction with a setting sub that can be shifted for hydraulic tubing-set or can be alternatively control-line set from surface. Applications The AV system is used for controlling annulus fluids in gas lift applications, monitoring of annulus pressures in critical situations, and in one- or two-trip annulus safety system completions. The completion can be run to depth and set with the surface tubing hanger flanged up. It can also be used in completions in which spacing out against a subsurface tubing hanger is required (i.e., no elastomeric expansion joint necessary). The tailpipe can be left in either tension or compression. The system can be used where high tensile loads and pressure differentials exist with the completion anchored in unsupported or poor condition casing. Features » Interlock system prevents preset » Tubing test facility while running » Hydraulically set in one trip on tubing with no mandrel movement » Annulus-mounted release mechanism » Internal/external components rotationally locked together » Element anti-extrusion system » One-trip system allows multiple control-line bypass » Premium thread connections — no elastomeric seals tubing to annulus » Primary release method is applied tubing pressure using dedicated punch release tool on slickline » Secondary release method available with simple tubing cut *information collected from manufacturer literature View Details

Gauge Root Valve – Female x Female – 1/4”, 1/2”, 3/4” – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Female x Female connection is designed to control and isolate pressure instruments in process systems, particularly in oil and gas applications. It is rated for a standard working pressure of 6000 PSI, with the option for higher pressures upon request.

The valve is type-tested to MSS-SP-99 and designed according to ASME B16.34 for pressure-temperature ratings, ensuring reliable performance under demanding conditions.

The valve features a metal-to-metal body and bonnet seal, providing high-pressure and temperature sealing without the need for O-rings. It can operate in temperatures from -50°C to 230°C, with graphite sealing available for applications up to 500°C. The stem has a backseat for added security, and a self-centering, non-rotating tip ensures consistent shutoff and leak-free performance.

The packing is located below the stem threads, isolating the threads from process media, and the gland retainer is easily adjustable for maximum packing stability. The valve includes a removable T-handle for low-torque operation and a dust cap to prevent contamination. All valves are factory-tested with nitrogen at 1000 PSI to verify seat and packing leakage, with a maximum allowable leak rate of 0.1 sec/min.

Materials can be supplied to meet NACE MR 01-75 standards, and heat code traceability is provided. Additional tests, including vibration, temperature, and helium, are available on request. This design ensures long-lasting, reliable operation while protecting connected instruments and maintaining safety in high-pressure systems.

View Details

9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 36-43.5 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

SC-2 Retrieable Packer

The Baker Hughes SC-2™ retrievable packer is a high-performance, retrievable, sealbore packer. It can be run and set on electric wireline, slick line/tubing with the same setting tools used for the D packer. We can source from current stock or direct from the manufacturer. View Details

MS-32 Multistage Steam Turbine

Unleash Unprecedented Power with the Kessels MS-102 Multistage Steam Turbine: The Apex of Efficiency and Reliability In the oil and gas industry, where power and precision are non-negotiable, Kessels Steam Turbines proudly presents the MS-102 Multistage Steam Turbine – a true marvel of engineering designed to redefine excellence in the world of steam turbines. Mastering Back-Pressure Turbines Back pressure turbines have long been the cornerstone of industrial steam applications, and our MS-102 Multistage Steam Turbine takes their capabilities to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines are the linchpin between boiler units and process steam headers, revolutionizing steam utilization and power generation. Efficiency Beyond Compare At the heart of the MS-102 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning perfectly with process demands. Every unit of electrical power generated is consumed precisely as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-102 turbine is not merely a machine; it's a versatile powerhouse ready to excel in an array of applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-102 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature is invaluable when low-volume steam demands and high tolerance for pressure variations are essential. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-102 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the most demanding environments. Unparalleled Versatility: Adapt effortlessly to changing needs, be it for drive applications or eco-friendly power generation, knowing that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-102 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

PRV repalcement Turbine

Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success. View Details

Alligator Grab Wireline Fishing Tool – 1.25”, 1.50”, 1.85”, 2.25”, 2.81”, 3.50” O.D. – Adjustable Jaw Pressure

The Alligator Grab is a wireline fishing tool used to catch and retrieve loose or broken objects from inside an oil or gas wellbore. It has spring-loaded, serrated jaws that can be adjusted before use to set the right amount of grip for the object being retrieved. When downward force is applied, a pin shears, allowing the jaws to close and hold the object securely.

This tool is needed when small or hard-to-reach objects, often called “fish,” are stuck or floating in the wellbore. Unlike other retrieval tools, the Alligator Grab provides a controlled grip that can be adjusted to the size and type of object, reducing the risk of pushing it further down or damaging the well. It is not meant for heavy jarring once it has gripped an object, so it is used for careful and precise recovery.

The Alligator Grab comes in various sizes, with a maximum outside diameter of 1.25 to 3.50 inches, a fishing neck O.D. of 1.187 to 2.313 inches, and top connections ranging from 15/16-10 UN to 1-9/16-10 UN. It includes fishing necks and pin threads compatible with standard wireline equipment.

What makes this type of Alligator Grab unique is its ability to retrieve objects in tight or restricted wellbore spaces. Its adjustable jaws and compact size allow it to securely grip objects that other tools might not reach, making it especially valuable for precise and reliable recovery operations.

View Details

Test Tools

Maximize Downhole Efficiency with HOCA Oil Tools' Advanced Test Tools In the highly specialized field of oil and gas exploration, precision, reliability, and efficiency are paramount. HOCA Oil Tools stands at the forefront of downhole technology, offering an extensive range of Test Tools designed to optimize and ensure the integrity of downhole operations. Our Test Tools are engineered to address the complex challenges encountered in modern well environments, enabling operators to conduct thorough evaluations and maintain control over their downhole conditions. HOCA's Test Tools: Precision Engineered for Optimal Downhole Performance HOCA Oil Tools' Test Tools are meticulously designed for testing tubing, locating leaks, setting hydraulic-set packers, and evaluating well integrity. These tools are crucial for maintaining well safety and efficiency, providing operators with accurate data to make informed decisions. Built from high-grade materials and adhering to strict industry standards, our Test Tools withstand the harsh downhole environment, delivering reliable performance and ensuring successful operations. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Test Tools means selecting a partner committed to your operational success. Our dedication to quality, innovation, and customer support ensures that our products not only meet but exceed the expectations of the demanding oil and gas industry. Integrating our Test Tools into your downhole operations signifies a step towards enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just equipment; you acquire a strategic advantage backed by our expertise and unwavering support. Opt for HOCA Oil Tools for your downhole testing needs and join the ranks of satisfied clients who trust our Test Tools to optimize their operations. Partner with us, and harness the power of precision-engineered solutions to elevate your downhole success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards for reliability, efficiency, and accuracy in the oil and gas industry. View Details

Shipping Containers for multiple purposes, 20 foot and 40 foot standard or hi-cube

A shipping container is a container with strength suitable to withstand shipment, storage, and handling. Shipping containers range from large reusable steel boxes used for intermodal shipments to the ubiquitous corrugated boxes. The 20ft shipping container is the most popular and widely used container. It’s the smallest of the standard container range and is the most popular choice for intermodal transport, as it’s the easiest to move around. The 40ft high cube container is a taller version of the 40ft container, and is great for moving over-height cargo (up to 2.7m or 8.1ft tall). View Details

Renewable Natural Gas (RNG) Virtual Pipeline

Efficient RNG Transport Solutions: Trust Lovat Gas Solutions If you have Renewable Natural Gas (RNG) that needs to be transported from Point A to Point B, Lovat Gas Solutions is here to provide you with comprehensive and efficient logistical solutions. With our expertise in RNG transport, we can devise a tailor-designed plan that perfectly suits your project's requirements, covering every aspect from compression to trucking and decompression facilities. Renewable Natural Gas (RNG) has emerged as a vital component in the transition towards sustainable energy. It offers the dual benefits of reducing greenhouse gas emissions and providing a clean, renewable source of energy. At Lovat Gas Solutions, we understand the importance of RNG and its role in creating a greener future. That's why we are dedicated to providing top-notch RNG transport services to ensure the smooth and efficient movement of RNG from its source to sales. When you partner with Lovat Gas Solutions, you can expect: 1. Tailor-Designed Logistical Plan: We recognize that each RNG transport project is unique, with its own specific requirements. Our experienced team will work closely with you to understand the details of your project and devise a logistical plan that is perfectly tailored to your needs. From compression to trucking and decompression facilities, we cover every step of the process. 2. Comprehensive Service: Our commitment to excellence extends to every aspect of RNG transport. We offer a full range of services, including compression facilities to prepare the RNG for transport, efficient trucking solutions to transport the RNG safely and reliably, and decompression facilities at the destination to ensure the gas is ready for distribution or utilization. 3. Expertise and Experience: With years of experience in the industry, our team has the knowledge and expertise required to handle RNG transport projects of all sizes. We stay up-to-date with the latest advancements in RNG technology and transportation, ensuring that we provide you with the most efficient and effective solutions available. 4. Commitment to Sustainability: At Lovat Gas Solutions, sustainability is at the core of everything we do. We understand the importance of reducing carbon emissions and creating a greener future. By providing RNG transport solutions, we contribute to the utilization of renewable energy sources and help our clients achieve their sustainability goals. When it comes to RNG transport, trust Lovat Gas Solutions to deliver exceptional service, reliability, and efficiency. Contact us today to discuss your project and let us devise a tailor-designed logistical plan that meets your specific requirements. Together, let's move towards a more sustainable future with efficient RNG transport solutions from Lovat Gas Solutions. View Details

TIG AC/DC 281 Pulse Welding Machine

7" HP-6 Hydraulic Set High Angle Production Packer for 26-32 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Rotary Blasthole Drill

Precision Performance to Drive Costs Down and Profitability Up The Cat® MD6310 drill rig is a powerful, flexible tool that can help you get the most out of your drilling operation. It offers a wide variety of features and options designed to meet your site’s specific needs and challenges, with an updated cab that keeps operators safe and comfortable while increasing performance and productivity. Infused with the latest technologies, the MD6310 not only increases productivity and allows for automated drilling, but also improves the efficiency of all downstream operations. Designed to drill holes from 203-279 mm (8-11 in) in diameter, the MD6310 is is optimized for single-pass or multi-pass drilling in both rotary and down-the-hole drilling modes. View Details

Micro Hydro Turbine

A SIMPLE WATER-TO-WIRE SOLUTION This micro hydro solution is based on both proprietary designs in the turbine and drivetrain, and off-the-shelf components, to deliver a complete water-to-wire system. This solution is a self-contained module made of single or twin turbines, generators, electrical cabinet, and is connectable to BOP/Grid. They are assembled and mounted in a self-stabilized concrete structure requiring no civil works. The system power output is 480 V, 3-phase AC, 50 Hz & 60 Hz. This new, highly cost-effective, renewable energy solution, capable of capturing most of the untapped energy on your site, has many assets. Its performance levels have been tested both in laboratory and on site. Actual power rating and instantaneous output depend mainly on water velocity (>1 m/s). In our catalogue of product, we can select the best options to suit a particular site. This technology is scalable by equipping an existing canal with dozens or hundreds of 5 to 15 kw modules. Land usage Turbines are installed on existing, untapped water infrastructures. No land planning is needed, with no modification required on existing assets. Predictable and available Permanent, predictable and controllable production with 95% availability. *information from manufacturer View Details

Packer AD-1 Tension Set

The AD-1™ tension packer is a compact, economical, retrievable packer. Primarily used in waterlood applications, it can also be used for production, treating operations, and when a set-down packer is impractical. And because the AD-1 is tension-set, it is ideally suited for shallow wells where set-down weight is not available. The ADL-1™ tension packer is a large-bore version of the AD-1 and offers the same features and beneits; running and retrieving operations are also the same. We can source from current stock or direct from the manufacturer. View Details

Casing Collar Locator (CCL)

Precision Depth Control with InWaTec Combined's Casing Collar Locator Services Precise depth measurement is the linchpin of successful well completion and intervention. At InWaTec Combined, we recognize the pivotal role of accurate depth correlation in the lifecycle of a well, which is why we offer our specialized Casing Collar Locator (CCL) Services. These services are not just about measurement; they are about enhancing the precision of every operation that follows. The CCL is an essential tool in our suite of downhole diagnostic services, used to establish an accurate depth correlation between the casing collars and the open hole log of the well. This correlation is vital for a multitude of subsequent operations, particularly for the strategic placement of perforations and the depth assurance of wireline services within the cased hole. Typically run in tandem with a gamma ray, Cement Bond Log (CBL), or other cased-hole logging tools, our CCL services ensure that completion depths chosen from open hole logs are accurately transferred to the cased well environment. This step is critical because it anchors the location of future operations to a verified depth reference, ensuring that all interventions are performed at the intended stratigraphic intervals. The CCL log becomes a key depth control measurement, serving as a guide for precision perforating. It allows us to target the exact depth for the perforation guns, ensuring that we connect the wellbore to the hydrocarbon-bearing zones with pinpoint accuracy. This service is particularly crucial in complex wells where even small deviations can lead to significant complications. At InWaTec Combined, we understand that the integrity and success of cased-hole wireline services hinge on the reliability of depth measurements. Our CCL services provide a foundation of certainty upon which all subsequent interventions can confidently build. With our CCL technology, clients can expect a seamless transition from logging to completion, perforating, and beyond. Opting for InWaTec Combined's CCL Services means choosing a partner committed to precision and reliability. Our advanced tools, combined with our expert analysis, provide the clarity and assurance needed to execute well interventions with confidence. Ensure your operations are grounded in accuracy with InWaTec Combined, where every millimeter counts towards the success of your well. View Details

Sand Pump Bailer

Streamline Wellbore Cleanout with HOCA Oil Tools' Sand Pump Bailers In the fast-paced and ever-evolving oilfield industry, efficiency and reliability are paramount. HOCA Oil Tools, a leader in innovative downhole solutions, introduces the Sand Pump Bailer – a cutting-edge tool designed for the effective cleanout of sand, debris, and other obstructions from wellbores. This essential tool is part of our comprehensive range of downhole slick line tools, engineered to enhance the safety and efficiency of your operations. Innovative Solutions for Complex Challenges: The Sand Pump Bailer The HOCA Sand Pump Bailer is specifically designed to address the challenges associated with sand and debris accumulation in the wellbore. Utilizing a simple yet effective mechanism, it allows for the removal of obstructive materials, ensuring a clear path for production and extending the life of the well. Constructed with high-quality materials, the Sand Pump Bailer withstands the harsh downhole environment, delivering consistent performance and durability. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are committed to delivering solutions that meet the unique needs of the oil and gas industry. Our Sand Pump Bailers embody this commitment, providing an efficient, safe, and cost-effective solution for wellbore cleanout challenges. With a focus on innovation, quality, and customer service, we ensure that our tools not only meet but exceed the expectations of our clients. Incorporate HOCA's Sand Pump Bailers into your downhole operations and experience a new standard of efficiency and reliability. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your wellbore operations. Leverage the power of advanced downhole solutions with HOCA Oil Tools. Our Sand Pump Bailers are more than just tools – they are partners in your operational success, ensuring that your wells remain productive, safe, and free from obstructions. View Details

Bottomhole Pressure Instrument Hangers and Tools

Elevate Downhole Efficiency with HOCA Oil Tools' BHP Tools for Landing Nipples In the sophisticated world of downhole operations, where precision and efficiency govern success, the significance of specialized tools cannot be overstated. HOCA Oil Tools, at the forefront of downhole technology, proudly presents our line of BHP Tools for Landing Nipples, specifically engineered to support wireline operations and ensure seamless integration and functionality in landing nipple environments. HOCA's BHP Tools for Landing Nipples: Unmatched Precision and Reliability Designed with the end-user in mind, our BHP Tools for Landing Nipples offer a comprehensive solution for monitoring bottom-hole pressure (BHP) and other downhole parameters. These tools are essential for optimizing wireline operations, allowing for accurate data recording and ensuring the safe and secure placement of geophysical instruments within landing nipples. Crafted from premium materials and engineered to withstand the challenging downhole environment, our BHP tools exemplify our dedication to quality, innovation, and reliability. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we understand the challenges faced in the oil and gas industry and are committed to providing solutions that enhance operational success. Our BHP Tools for Landing Nipples represent this commitment, offering a level of precision, efficiency, and reliability that sets new industry standards. Choosing HOCA’s BHP Tools for your downhole operations means not only equipping yourself with superior tools but also partnering with a company that stands behind its products with unparalleled support and expertise. Opt for HOCA Oil Tools for your landing nipple needs and take your downhole operations to the next level. Partner with us to leverage the advantages of our BHP Tools and experience enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, elevate your wireline operations with tools that blend innovation with reliability – driving your success downhole. View Details

OilHungry oil absorbent big pad

Oil absorbent pads are designed to selectively absorb oil-based liquids while repelling water. They are commonly used in various industries, including automotive, marine, and manufacturing, to clean up and control oil spills or leaks. These pads are crucial for preventing environmental contamination and ensuring workplace safety. The size of oil absorbent pads can vary, and this specific product, Oil Absorbent big pad 22" x 23", is designed with dimensions of 22 inches by 23 inches. This size is suitable for addressing larger spills or leaks. It works very well and easy, when oil leaks occur, simply place the absorbent pad in the affected area to efficiently clean up and contain the spilled oil. And After use, follow proper disposal guidelines, on the packaging. The primary purpose of OilHungry Oil Absorbent pad is to effectively clean up oil spills. Whether it's a minor leak or a more substantial oil spill in an engine, the absorbent pad is designed to capture and contain the oil, preventing it from spreading further. Leaking oil can happen with every boat or vessel. And oil leaks pose a significant threat to the environment. The absorbent pad helps mitigate this threat by quickly and efficiently absorbing the leaked oil. This proactive approach protects water bodies, preventing the oil from contaminating rivers, lakes, or oceans. Having an Oil Absorbent big pad (22" x 23) is a valuable tool to address and solve challenges related to leaks in engines. the absorbent pad offers a targeted and effective solution for managing oil spills in various industrial and marine settings. Having the Oil Absorbent big pad prepared in your boat, is the same as having a plan for unexpected leaks. View Details

5 1/2" Mech-1 Single Grip Mechanical Set Packer for 13-15.5 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

MIG Spool Gun CST251

Introducing the Canaweld MIG Spool Gun CST251: Your Ultimate Solution for Precise Aluminum Welding When it comes to welding aluminum, achieving a stable arc and reliable feed is crucial for success. Meet the Canaweld MIG Spool Gun CST251, a game-changing accessory designed to enhance the "feed ability" of aluminum and other challenging wires, providing welders with exceptional control and precision. Unleash the Power of Aluminum Welding - Experience Unmatched Feeding Performance The Canaweld CST251 Spool Gun revolutionizes the welding experience with its short feed distance, offering a steady, reliable feed of soft aluminum wire. This pistol-grip style spool gun houses a compact 1 lb. 1/4-inch diameter spool of wire, delivering the perfect solution for feeding difficult wires like aluminum through the standard MIG gun. Experience Efficiency and Reliability - Designed for Excellence The CST251 spool gun is a lightweight, well-balanced semi-automatic gun with dual groove drive rolls and a heavy-duty all-metal wire feeder. Setting up the spool gun is a breeze, ensuring welders can quickly and efficiently achieve exceptional aluminum wire feeding with a variety of CV power sources and engine-driven welders. Remarkable Features that Make a Difference Let's explore the outstanding features of the Canaweld MIG Spool Gun CST251: 1. Multiple Processes: The CST251 is suitable for MIG (GMAW), Pulsed MIG (GMAW-P) with pulsing power sources, and FCAW, providing versatility for a wide range of welding applications. 2. Wire Types: Designed to handle aluminum, steel, and flux-cored wire, the CST251 is the ultimate companion for welding various materials with ease. 3. Industrial Applications: From trucks, trailers, and railcars to aerospace hardware, boat/yacht building, and recreational vehicles, the CST251 excels in diverse industrial applications. 4. Precision Welding: Perfect for automotive/motorcycle frames, sports products like scooters and bicycles, furniture, ladders and frames, ship decks, sign manufacturers, and general repair and maintenance. 5. Easy Maintenance: The CST251 features easy access to the drive assembly, reducing service time, and allowing routine maintenance without disassembling the gun. Elevate Your Welding with Canaweld MIG Spool Gun CST251 At Canaweld, we are dedicated to empowering welders with cutting-edge solutions that enhance their productivity and performance. The CST251 Spool Gun is a testament to our commitment to excellence, providing welders with the tools they need to achieve precise and reliable aluminum welding in diverse industrial settings. Experience the difference of seamless aluminum wire feeding with the Canaweld MIG Spool Gun CST251 - Your Ultimate Solution for Precision Welding! View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type