The Needle Valves Hex Body Series Male x Female are industrial valves designed for precise flow control in high-pressure systems. The hexagonal body allows for standard wrench access, facilitating installation and maintenance. Male and female NPT connections enable integration into various piping systems, commonly used in instrumentation, process control, and oil and gas applications.

These valves are manufactured according to ASME B16.34 standards and type-tested to MSS-SP-99. They have a standard working pressure of 6000 PSI, with options for higher pressures. The metal-to-metal body and bonnet seal provides reliable sealing under high pressure and temperature conditions. Materials can comply with NACE MR 01 75, and the valves operate over a temperature range of -50°C to 230°C, with graphite seals available up to 500°C.

Each valve undergoes factory testing for seat and packing leakage using nitrogen gas at 1000 PSI. The valves feature a back-seated stem, rolled threads, and a mirror-finished stem through the packing, ensuring consistent and smooth operation. The removable T-handle reduces torque requirements during operation, and a dust cap protects the stem threads. The hex body and male-female connections provide a standard interface for connection while maintaining secure and leak-resistant operation.

The Tube Fittings Male Elbow NPT is a mechanical fitting that provides a 90° connection between tubing and components with National Pipe Taper (NPT) threads. It is designed for use in high-pressure systems with operating pressures up to 6000 PSI.

The elbow configuration allows tubing runs to change direction while maintaining a sealed joint. Threads are tapered in accordance with NPT standards to create a pressure-tight seal when properly installed.

These fittings are produced in a range of sizes from 1/4” to 1” and are manufactured in line with ASME B16.34, MSS-SP-99, and ASME B31.3 requirements. Typical applications include oil, gas, and industrial process systems where tubing must be connected to threaded equipment or piping at an angle.

The HDI 1000P Pressure Gauge System is a battery-powered, intrinsically safe electronic gauge used to monitor high-pressure systems in oil and gas operations. It measures pressure using a strain gauge sensor and provides real-time readings on a digital display with both numeric and bar graph formats. Common applications include choke manifolds, cementing units, coiled tubing, and high-pressure pumping systems.

With pressure ranges available from 5,000 psi up to 30,000 psi, the 1000P is suitable for demanding environments. It offers ±0.5% full-scale accuracy, and optional 4-20mA or 0–1 VDC outputs for integration with PLCs or remote monitoring systems. The unit is housed in a sealed stainless steel enclosure and built to perform reliably in harsh, high-vibration field conditions.

Designed for ease of use, the 1000P includes a field-replaceable battery pack and supports a range of connection types such as 2" 1502, 2002, 2202, or flanged. Its solid-state platform minimizes maintenance and ensures consistent performance over time, making it a dependable tool for critical pressure monitoring tasks.

Pipe Fittings Adapters Female to Male NPT are designed to connect a female-threaded pipe or fitting to a male-threaded pipe, providing a secure and leak-resistant joint. They are made from high-quality materials such as stainless steel, brass, and carbon steel to ensure durability and corrosion resistance in demanding environments.

The adapters are suitable for a wide range of pressures, with standard ratings up to 10,000 psi, and conform to industry standards including ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228.

These adapters are used extensively in oil and gas applications, instrumentation, and process control systems where it is necessary to adapt different thread types or sizes. Their precise threading ensures maximum engagement and leak-tight connections, making them reliable for high-pressure or critical systems.

Available in sizes ranging from 1/8 inch to 1 inch, these adapters support efficient and safe connections in pipelines, instrumentation panels, and chemical or petrochemical systems. Their compact design allows for installation in tight spaces without compromising performance, and they are free from burrs or debris to maintain smooth flow paths.

The Mini Needle Valve Series – Male x Female is designed for accurate and reliable flow control in small or compact piping systems. Its male-to-female connections allow easy integration into existing instrumentation or process lines. The valve ensures bubble-tight shut-off, preventing leaks in sensitive applications.

The rolled stem threads provide smooth operation, strength, and long service life, while the mirror-finished stem reduces friction, extends packing life, and ensures consistent performance. Packing located below the stem threads prevents lubricant washout, protects against corrosion, and keeps solids from entering the thread area, which could cause damage.

With low operating torque, these valves are easy to operate even in tight spaces. Optional panel-mount versions allow installation in control panels or instrument assemblies, making them ideal for oil and gas, chemical, and other industrial applications where precise flow control is essential.

The R Type 2 Valve Manifold Integral Mount 1/2” Female NPT is a compact and robust solution for connecting impulse lines directly to pressure transmitters or gauges. It features a simple two-valve arrangement that allows operators to block process pressure, safely bleed trapped pressure, and calibrate transmitters without the need for additional piping. This configuration ensures quick and efficient maintenance and reduces potential leak points.

Its integral mount design allows the manifold to be attached directly to the transmitter, eliminating the need for extra brackets or complex assemblies. This not only saves space but also provides a secure and stable connection, which is particularly useful in oil and gas applications where reliability under high-pressure conditions is critical.

The manifold is constructed with a metal-to-metal body and bonnet seal to handle pressures up to 6000 PSI, with higher pressure options available upon request. It is fully factory tested for seat and packing leakage, and materials can be supplied to meet NACE MR 01 75 standards. The R Type is suitable for a wide temperature range and is designed to provide smooth operation, long-term durability, and leak-free performance even in demanding field conditions.

The 2 Valve Manifold H Type Flange to Flange is designed for use in the oil and gas industry to connect impulse lines and transmitters. Its simple two-valve configuration allows operators to perform essential tasks such as blocking, bleeding, and calibrating static pressure transmitters or gauges with ease. This design ensures accurate and reliable measurement while minimizing the risk of leaks or process interruptions.

The H Type manifold features a metal-to-metal body and bonnet seal, which provides a secure seal under high pressure and temperature conditions, eliminating the need for O-ring seals. The valves are designed with a self-centering, non-rotating tip to provide consistent positive shutoff and reduce wear on the packing. The stem includes a back seat for added safety, and a removable T-handle ensures smooth operation with low torque. A dust cap protects the stem from contamination, and rolled threads improve durability and ease of operation.

These manifolds are manufactured to meet ASME B16.34 standards for pressure-temperature ratings and are type tested to MSS-SP-99. They have a standard working pressure of 6000 PSI, with higher pressures available upon request. Materials can be supplied in accordance with NACE MR 01 75, and temperature ratings range from -50°C to 230°C, or up to 500°C with graphite. Every valve is factory tested for leakage and performance, and heat code traceability ensures quality and reliability. 

The Check Valve Poppet Type with 1/4" NPT tube ends is a compact, high-performance valve designed to provide reliable one-way flow control in hydraulic and pneumatic systems. Built for demanding applications, this valve is rated up to 6000 PSI working pressure, making it suitable for both high-pressure and industrial environments.

The poppet design ensures a tight seal when backflow occurs, preventing fluid from moving in the reverse direction while allowing free flow in the intended direction. This not only protects sensitive system components but also maintains system efficiency by eliminating leakage.

With a cracking pressure typically available from 1 to 25 psi, the valve can be selected to suit specific operational needs, ensuring smooth opening without unnecessary resistance. The female NPT tube end connection provides a secure, leak-free fit, compatible with a wide range of standard piping and tubing systems. Constructed from durable stainless steel or carbon steel depending on configuration, the valve offers excellent resistance to wear, corrosion, and high-pressure fatigue.

Commonly used in oil and gas, the poppet-type check valve provides consistent performance, low maintenance requirements, and long service life.

Its simple yet effective design ensures operators can trust it in critical applications where preventing reverse flow is essential for safety and operational reliability.

The Gauge Root Valve Male x Female is a high-pressure valve designed for precise isolation and control of gauge lines in oil and gas industry. It allows for secure attachment of pressure gauges or instruments while maintaining reliable sealing and flow control. The male x female connection simplifies installation by providing a compact and leak-resistant interface, suitable for both standard and custom piping setups.

This valve is built to withstand pressures up to 6000 psi, with optional higher ratings available upon request, and operates over a wide temperature range from -50°C to 230°C, with extended ratings up to 500°C when using graphite seals. The metal-to-metal body bonnet seal ensures consistent high-pressure performance without relying on O-rings.

The valve’s stem incorporates a backseat design for added safety, rolled threads for smooth operation, and a self-centering, non-rotating tip that provides consistent, leakage-free shutoff. Packing is positioned below the stem threads to prevent media contact, and an adjustable gland retainer enhances stability and long-term performance. A removable T-handle enables low-torque operation, while the stem dust cap prevents contamination and protects the actuating threads.

Manufactured to ISO 9001, PED, ATEX, ASME B16.34, and MSS-SP-99 standards, each valve undergoes rigorous factory testing, including pneumatic leak checks at 1000 psi, to ensure reliability and compliance. Optional vibration, temperature, and helium testing can be performed to meet specific process requirements. Heat code traceability and NACE-compliant material options provide confidence in both performance and quality.

This combination of features makes the Gauge Root Valve Male x Female an ideal choice for safe, accurate, and durable gauge isolation in critical industrial systems.