Ballycatter.ca - Industrial Equipment

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Inverter and Charger Combination

Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue View Details

Cable Counter

I'm excited to share with you one of our innovative products that can greatly benefit your business. Our cable counters are designed to accurately measure material as it's threaded through the internal wheels, making it an essential tool for the oil industry. What sets our cable counters apart is their ability to add and subtract measurements, giving you precise readings of the amount of material that has been used or remaining. This feature not only saves you time but also ensures accuracy in your operations, which is crucial in the oil industry. Our cable counters are versatile and can be mounted on a pedestal or floor stand, making them easy to use and accessible for your team. This ensures that your operations run smoothly and efficiently. At Sivam, we take pride in our commitment to quality and durability. Our cable counters are built to withstand harsh environments and are made to last, giving you peace of mind and saving you money in the long run. Investing in our cable counters will give you a competitive edge in the oil industry, making your business more efficient and profitable. Contact us today to learn more about our products and how they can benefit your operations. View Details

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 24-28 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

9 5/8" Hydraulic Set Large Bore Retrievable Production Packer

HPL-1 Hydraulic Set Retrievable Production Packer – Large Bore Design for 9 5/8” Casing

The HPL-1 Hydraulic Set Retrievable Production Packer is a large-bore, hydrostatic-set, double-grip packer engineered for 9 5/8” casing, providing enhanced flow capacity and efficient wellbore isolation for production, injection, and zonal isolation applications. Designed to maximize flow efficiency while maintaining well integrity, this packer is set hydraulically by applying tubing pressure, eliminating the need for mechanical tubing manipulation. The expanded internal diameter minimizes flow restrictions, making it an ideal solution for high-rate production and injection wells. Once set, the multiple packing element systemensures a mechanically locked, long-lasting seal, maintaining pack-off force throughout its operational life.

To prevent movement under differential pressure, the hydraulic hold-down pistons engage after setting, while the body lock ring secures the setting force, ensuring bottom-hole pressure variations or tubing contraction do not affect the seal. The large bore design allows for unrestricted flow paths, improving overall reservoir performance and artificial lift system efficiency. This makes it particularly valuable in ESP, gas lift, and other high-flow applications, where maintaining maximum production rates is critical.

For retrieval, operators can use a straight upward pull or an optional right-hand rotational release for controlled removal, reducing the risk of stuck tools and minimizing intervention time. With its high-capacity flow path, secure hydraulic setting, and efficient retrievability, the HPL-1 packer for 9 5/8” casing is an optimal solution for operators looking to enhance well performance, reduce pressure losses, and maintain long-term well integrity.

View Details

Monoflange DBB Double Block & Bleed Valve – Flange x Thread – Needle Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange DBB Double Block and Bleed Valve with Needle-Needle-Needle configuration is designed to provide dual isolation and safe venting in oil and gas, chemical, and process systems. Both isolation points use needle valves, allowing precise control of flow and pressure in the cavity between the two isolation points, which minimizes leakage and ensures accurate venting. This configuration is particularly suited for instrument and gauge isolation, chemical injection, and sampling applications, where fine control and safety are critical.

The monoflange design integrates the two isolation valves and the bleed into a single compact body. This eliminates the need to bolt together separate valves, reducing the number of joints, potential leak paths, and overall weight, while saving installation space and simplifying maintenance. The valve can accommodate flange sizes from 1/2” to 2” and is rated for Class 150 to Class 2500, making it suitable for a wide range of high-pressure applications.

Manufactured to recognized industry standards including ASME B16.34, API 6D, and ISO 17292, the valve is available in a variety of materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional NACE MR-0-175 compliant materials are available for corrosive environments. In-built vent valves and low emission testing ensure the valve meets stringent safety and environmental requirements, providing a reliable solution for critical fluid control applications.

View Details

ATEX Group II, Battery

Power Your Work with the ATEX Group II Battery – A High-Performance Solution from Provix Provix is proud to present the ATEX Group II Battery (Part # NWI-WLAMP3A-ATEX), a powerful and reliable energy source designed specifically for use in challenging industrial environments. This battery is an ideal choice for professionals who require dependable and long-lasting power for their mining and construction equipment. Exceptional Performance and Durability The ATEX Group II Battery is engineered to deliver outstanding performance. With a capacity of 2*3.5=7.0Ah, it offers a strong and consistent power supply, ensuring your equipment operates at peak efficiency. The battery boasts an impressive 11000 LUX and 240 Lumens, providing bright and clear illumination for a variety of tasks. Extended Runtime for Demanding Workdays One of the key features of this battery is its extended runtime. Capable of running for 13 hours on a single charge, it is perfectly suited for long shifts and continuous use. This extended runtime ensures that your equipment stays operational throughout your workday, minimizing interruptions and maximizing productivity. Compliance with ATEX Safety Standards Safety is paramount in industrial settings, and the ATEX Group II Battery adheres to the highest safety standards. It is specifically designed for use in potentially explosive atmospheres, meeting the rigorous requirements of ATEX Group II certification. This compliance ensures that the battery can be safely used in hazardous environments commonly found in mining and construction sites. Robust Construction for Industrial Use Constructed with durability in mind, the ATEX Group II Battery is built to withstand the tough conditions of industrial work environments. Its robust design ensures it can endure the rigors of daily use, providing reliable performance over time. Ideal for Mining and Construction Professionals Whether you are working in mining, construction, or any other industry where reliable power is crucial, the ATEX Group II Battery is an essential tool. Its combination of high performance, extended runtime, and compliance with safety standards makes it a top choice for professionals. Invest in Reliable Power with Provix Upgrade your equipment with the ATEX Group II Battery from Provix. Visit our website at www.provix.net to learn more about this high-quality battery and explore our wide range of specialized mining and construction equipment. Power your work with the best – choose Provix. View Details

U-KWIK Cross Coupling Protector

Electric Submersible Pump ESP Packer – 7" – 3,500 PSI

The 7" ESP Packer is a single-mandrel, dual-bore, hydraulic-set production packer set in place using hydraulic pressure applied through the tubing. The dual-bore configuration includes a pass-through section that allows the electric cable to reach the ESP pump below the packer while maintaining isolation between the tubing and the annulus, enabling reliable deployment and operation of the ESP system for artificial lift in oil and gas wells.

The packer has bi-directional, case-carburized barrel slips that anchor it securely against well pressures from both above and below, preventing movement during operation. It can be retrieved with a straight upward pull on the tubing string and is available in both straight-pull and cut-to-release configurations to suit different well conditions.

The packer has a nominal size of 7" and fits 7" casing weighing 26–32 PPF or 7-5/8" casing weighing 55.3 PPF. The outer diameter is 5.970", and the main bore inner diameter is 2.992". The assembly allows up to five feed-through lines for electric cables or injection lines, and the total length is 125".

The body is made from L80 material with HNBR elastomer seals, rated for pressures up to 3,500 PSI and temperatures from 70°F to 300°F. Connections include a 3-1/2", 9.2 PPF VAM TOP box at the top and a 3-1/2", 9.2 PPF VAM TOP pin at the bottom. The release weight is 68,800 lbs. The packer meets API Validation Grade V3 and Quality Level QL1 standards, providing reliable performance under standard service conditions.

These attributes make the ESP packer reliable for high-load applications, adaptable to various completion designs, and efficient in facilitating ESP deployment in oil and gas wells.

View Details

Tracked-hoe Excavator of various sizes and brands available to fit your needs

Excavators contain four major pieces - a boom, dipper, bucket, and cab, all of which are located on a rotating platform known as the house. Excavators are versatile pieces of equipment that can be used in the following applications (to name just a few); Digging trenches, holes, and foundations Demolition with hydraulic claws, cutters, and breaker attachments Mining, especially, but not only open-pit mining Driving piles, in conjunction with a pile driver Dredging rivers Drilling shafts and rock blasting Snow removal with snowplow and snow blower attachments Forestry mulching Handling materials Brush cutting with saws and mower attachments General landscaping Forestry work Construction View Details

Oclansorb Oil Spill Clean-up Material

Oclansorb is 100% organic and non-toxic material which absorbs oil on contact. This oil absorbent is biodegradable and can be used on land and on water. Oclansorb is made from sphagnum peat moss and will absorb oil and hydrocarbons but not water. It is 15 times more absorbent than clay, translating into one 18 pound bag of Oclansorb being as effective as 450 pounds of clay. This improves the efficiency of clean-up operations as only 1 bag of Oclansorb replaces the shipping and handling of nine 50 pound bags of clay. On land, apply Oclansorb over the area with hydrocarbon contamination and lightly brush the Oclansorb around. The surface can be dry or wet, as Oclansorb does not absorb water. The oil is absorbed on contact, and the captured volumes can be disposed of in landfills or incinerated (as approved by local authorities). On water, cover the oil with Oclansorb as completely as possible. In wavy or flowing conditions, a boom should be used to concentrate the oil. The hydrocarbon will absorb on contact with Oclansorb, and mixing the material to expose more surface area to the hydrocarbons increases absorption. View Details

Storm Choke WI Valve 3.97 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

7 5/8" HP-6 Hydraulic Set High Angle Production Packer for 24-29.7 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Tubing Retrievable Surface Controlled Subsurface Safety Valve 2-7/8 inch SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

HP-1 Hydraulic Set 9 5/8 inch Packer

The HPL-1 Large Bore Hydraulic Set Retrievable Production Packer is a high-performance isolation toolactivated using tubing pressure, eliminating the need for mechanical manipulation. When pressure is applied against an underneath plugging device, the hydraulic setting mechanism engages, compressing the multiple packing element system to create a secure seal between the tubing and casing. Designed for versatility, the HPL-1 is available in 7” and 9 5/8” large bore options, making it ideal for high-volume production and injection applications. This design allows the packer to be set at any depth, making it particularly effective in low hydrostatic head wells while ensuring well integrity after the tubing is in place, even in large-diameter casing environments.

Once set, the double-grip system secures the packer in position using hydraulic hold-down pistons and a body lock ring, preventing unwanted movement due to pressure fluctuations or tubing expansion. Themechanically locked setting force ensures that reductions in bottom-hole pressure or tubing contraction do not weaken the seal, providing long-term reliability in production, injection, and zonal isolation applications. With the 7” and 9 5/8” options, the HP-1 is well-suited for high-flow rate completions, offering exceptional sealing performance and operational efficiency in larger casing sizes.

To retrieve the packer, operators can apply a straight upward pull, or, if equipped with the optional right-hand rotational release, use torque combined with a shear release mechanism. This flexibility allows for efficient removal in both standard and deviated wells, making the HP-1 packer a versatile, high-capacity solution for a wide range of completion designs, including large-bore well systems requiring robust isolation and retrieval capabilities.

View Details

ImplosionStixx by StimStixx

Introducing the ImposionStixx by StimStixx Technologies - Redefining Wellbore Perforation Cleaning with Precision Implosion! Are you ready for a game-changing solution to enhance your wellbore perforation cleaning? Look no further than the ImposionStixx by StimStixx Technologies. Our revolutionary product utilizes a specially formulated solid acid stick, capable of delivering heated acid vapor with pinpoint accuracy at the zone of interest, while creating an extraordinary implosion downhole. Harnessing the power of highly reactive heated acid vapor, the ImposionStixx guarantees increased penetration and optimal contact with contaminants and carbonate scale, effectively cleaning wellbore perforation tunnels like never before. The implosion created downhole ensures a thorough and efficient cleaning process, leaving no room for compromise when it comes to well stimulation. The ImposionStixx offers unparalleled environmental benefits as well. As the heated acid vapor interacts with contaminants and carbonate scale, it vaporizes and becomes fully spent down-hole, leaving no contaminated effluent behind. This not only reduces the risk of spills at the surface but also eliminates the need for post-treatment clean-up or disposal. With StimStixx Technologies, you can rest assured that you are making a choice that prioritizes both operational excellence and environmental responsibility. Say goodbye to traditional methods that fall short in achieving the level of precision and effectiveness you deserve. The ImposionStixx is here to revolutionize wellbore perforation cleaning, providing you with exceptional results, increased operational efficiency, and peace of mind. Join the ranks of industry leaders who trust StimStixx Technologies to deliver cutting-edge solutions for well stimulation. Experience the power of precision implosion with the ImposionStixx and unlock the true potential of your wellbore perforation cleaning. The future of well stimulation starts here. View Details

MLE Clamp for ESP's

Gauge Cutter

Enhancing Well Integrity with HOCA Oil Tools B.V.'s Slickline Gauge Cutters In the specialized field of oil and gas exploration and production, maintaining well integrity and efficiency is non-negotiable. At HOCA Oil Tools B.V., we are at the forefront of providing innovative solutions that cater to the complex needs of wellbore maintenance. Our comprehensive array of Slickline Gauge Cutters represents our commitment to excellence and precision, designed to tackle diverse challenges within the tubing string. Multi-functional and Versatile Applications: Our Rebco Type ‘A’ Gauge Cutters serve as multi-functional tools indispensable in the upkeep and maintenance of tubing strings. They are meticulously designed for removing paraffin, corrosion, and other foreign materials from the internal surface of the tubing, ensuring unimpeded flow and operational efficiency. The versatility extends to gauging and tagging obstructions, identifying and marking landing nipples, and preparing wells for the safe insertion of sub-surface controls. These applications underscore the critical role our gauge cutters play in well maintenance and diagnostics, emphasizing their value in operational planning and safety. Customizable Sizes for Precise Operations: Understanding the diversity of wellbore sizes and operational requirements, HOCA Oil Tools offers Gauge Cutters ranging from 1 inch to 7 inches in diameter. This extensive range ensures that all operational needs are met, from smaller interventions to large-scale maintenance tasks. Each gauge cutter can be customized to specific operational needs, ensuring that whatever the well condition or requirement, we have the right tool for the job. How to Order and Customization Options: Our ordering process is streamlined to ensure that you receive the gauge cutter that best suits your operational needs. Gauge cutters are ordered by part number, designated by the outer diameter to three decimal places, ensuring precision and compatibility with your specific well conditions. Additionally, we offer customization options for thread and fishing neck lengths, accommodating unique operational requirements and ensuring that our tools integrate seamlessly with your existing equipment. In conclusion, HOCA Oil Tools B.V. remains committed to providing the oil and gas industry with superior quality tools and customer service. Our Slickline Gauge Cutters are a testament to this commitment, offering unparalleled versatility, efficiency, and reliability in wellbore maintenance operations. Choose HOCA Oil Tools for your downhole needs, and experience the difference that quality, innovation, and precision can make in optimizing your well performance View Details

MIG Pulse / Multiprocess 202 Welder

2" Globe-Style Gas Metering Valve

The 2” Globe-Style Gas Metering Valve is designed to provide precise regulation of fuel gas flow in industrial and aero-derivative gas turbines. Its globe valve design offers excellent throttling capabilities, allowing fine control over fuel delivery to maintain the optimal fuel-to-air mixture necessary for efficient combustion. This precise control is crucial for achieving stable turbine performance, reducing emissions, and optimizing fuel consumption.

Constructed with robust materials, the valve is built to withstand the high pressures and temperatures commonly encountered in gas turbine applications. Its durable design ensures long service life and reliable operation even under demanding conditions. The valve features foolproof electrical cables and connectors, enhancing installation safety and reducing the risk of connection errors.

The valve’s compact size and right-angle configuration facilitate straightforward integration into existing turbine fuel systems. Compared to previous models, this valve is an upgrade due to its improved electrical interface and enhanced durability, which reduce maintenance needs and increase operational reliability.

By accurately controlling fuel flow, the 2” Globe-Style Gas Metering Valve helps prevent issues such as flame instability and combustion inefficiency, contributing to smoother turbine operation and lower maintenance costs. It is widely used across various turbine models, including aero-derivative and small- to mid-frame industrial turbines, where precise fuel metering is critical for maintaining performance and compliance with environmental standards.

View Details

Wisdom Cap Lamp KL12MS

Discover Unmatched Illumination with Wisdom's KL12MS Corded Miner's Cap Lamp from Provix Introducing the Wisdom KL12MS Corded Miner's Cap Lamp, a cutting-edge lighting solution for the mining industry, proudly offered by Provix. This lamp is specifically designed to meet the challenging demands of underground mining, providing exceptional illumination, safety, and durability. Exceptional Lighting Performance The KL12MS is equipped with a robust 14,000mAh battery, guaranteeing up to 13 hours of continuous operation. It features a high-powered main light LED with a working voltage of 3.0V, current of 1080mA, and power of 3.24W. This results in a remarkable luminous flux of 512 lm and an extraordinary lighting degree of 28,000 lx, ensuring unparalleled visibility in the darkest environments. Durability and Longevity Built to last, the KL12MS boasts a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery life extends up to 1,200 cycles under typical working conditions, emphasizing reliability and longevity. Prioritizing Safety Your safety is our priority. The KL12MS is designed with explosion-proof features, conforming to ATEX GROUP II standards, and an IP68 waterproof rating. Its short circuit protection time of less than 320 μs further enhances its safety credentials, making it a trustworthy companion in any mining operation. Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz), the KL12MS is comfortable for extended use. Its main cable length ranges from 1.4 to 1.65 meters (4.59 to 5.41 feet), offering flexibility and freedom of movement. The compact battery box, measuring 94 x 36 x 90 mm (3.7 x 1.4 x 3.5 in), ensures the lamp is not cumbersome during long shifts. Efficient Charging Capabilities The lamp's rechargeable via USB feature provides convenient and efficient charging. It takes only 5.5 to 10 hours to charge, minimizing downtime and maximizing productivity. Get in Touch for More Information Upgrade to the Wisdom KL12MS Corded Miner's Cap Lamp for enhanced visibility, safety, and efficiency in your mining operations. Visit Provix at our location, call us, or email sales@provix.net for more details. Explore our range of products at www.provix.net and experience the future of mining illumination with the Wisdom KL12MS. View Details

CSA 120 unit, non-Locking FAST charger rack

Maximize Charging Efficiency with the CSA 120 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to present the CSA 120 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-120BC), a large-scale charging solution designed for operations that demand quick and efficient charging of a high volume of equipment. This charger rack is perfect for extensive mining operations, large construction sites, and industrial settings where time and space are of the essence. High-Capacity, Rapid Charging The CSA 120 Unit Charger Rack is engineered to meet the needs of large teams, offering rapid charging times of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This fast charging capability is crucial for operations where equipment must be ready for continuous use, ensuring minimal downtime and maximum productivity. Designed for Space Efficiency Despite its large capacity, the CSA charger rack is designed to be space-efficient. It’s an ideal solution for organizations that need to manage a significant number of devices but have limited space. This single-sided charger rack can be easily placed in equipment rooms or centralized charging stations, optimizing your workspace. Easy Access and User-Friendly The non-locking feature of this charger rack offers easy and quick access to all charging ports, making it straightforward to manage multiple devices. This design is particularly beneficial in dynamic work environments where quick equipment turnaround is essential. Durable and Reliable for Industrial Use Constructed with durability in mind, the CSA 120 Unit Charger Rack is built to withstand the demanding conditions of mining and industrial environments. Its robust construction ensures it can provide reliable performance over time, making it a smart investment for large-scale operations. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and equipment rental providers who need to charge a substantial number of devices efficiently. Its high capacity and fast charging capabilities make it an indispensable tool for operations of considerable size. Upgrade Your Charging Station Equip your operation with the Wisdom CSA 120 Unit Non-Locking FAST Charger Rack from Provix. Visit our website at www.provix.net to discover more about this high-capacity, efficient charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions. View Details

ESP Disassembly Bench

Are you in need of a high-quality disassembly bench for the teardown and inspection of electric submersible pumps? Look no further than Sivam! We're proud to offer a range of disassembly benches that are specifically designed for the inspection and maintenance of ESP's. Our benches are built from the highest quality materials and are engineered to provide exceptional durability and reliability, ensuring that your team can work safely and efficiently. At Sivam, we understand the importance of precision and accuracy when it comes to maintaining critical equipment like ESP's. That's why our disassembly benches are designed to provide a stable and secure platform for teardown and inspection, with features like adjustable height for a level working surface to ensure maximum convenience and ease of use. But that's not all - our disassembly benches also come equipped with a range of additional features to help your team work more efficiently. From built-in cages to customizable work surfaces, our benches are designed with your team's needs in mind. At Sivam, we're committed to providing our customers with the highest level of quality and customer service. That's why we work closely with our clients to understand their specific needs and design benches that meet their exact specifications. So if you're in need of a high-quality disassembly bench for the inspection and maintenance of ESP's, choose Sivam. Contact us today to learn more about our products and services and to find out how we can help take your operations to the next level! View Details

7" HP-6 Hydraulic Set High Angle Production Packer for 26-32 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

4” Surface-Controlled Subsurface Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 4-inch Surface-Controlled Subsurface Safety Valve (SCSSV) is designed for installation in wells with 4-inch production tubing and serves as a critical safety device to shut in the well during uncontrolled flow events caused by equipment failure or loss of surface hydraulic control pressure. The valve operates via a hydraulically actuated flapper mechanism that remains open under normal operating pressure but closes automatically if the hydraulic signal is lost. This fail-safe design isolates the wellbore, preventing unintended release of hydrocarbons and protecting both personnel and the environment.

The flapper mechanism is simple and robust, minimizing moving parts in the flow path and reducing potential points of failure. When open, the sealing surfaces are positioned out of the fluid flow path, which helps maintain smooth production flow and reduces wear on sealing components. The valve’s hydraulic actuation allows reliable operation under varying pressure and flow conditions commonly encountered in oil and gas wells.

The valve is wireline retrievable, which means it can be removed, serviced, or replaced using wireline tools without the need to pull the entire tubing string from the well. This capability significantly reduces well intervention time and associated costs while allowing maintenance or upgrades to be performed efficiently.

This SCSSV fits standard landing nipples with a seal bore of 3.313 inches and is rated for working pressures up to 5,000 psi. Its internal valve diameter is 1.75 inches, providing an appropriate balance between flow capacity and structural integrity for wells with moderate to high flow rates. The 4-inch tubing size is common in many oil and gas production wells, making this valve size versatile across different field conditions.

This size is commonly applied in production wells where 4-inch tubing is standard, supporting reliable well control and efficient maintenance. Its hydraulic surface control and simple flapper design contribute to dependable operation under varying well conditions.

View Details

Subsurface Safety Valve for Injection Wells 5.4 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Plug Chokes for Tubing

Elevate Downhole Efficiency with HOCA Oil Tools' Plug Chokes for Tubing In the rapidly evolving landscape of the oil and gas industry, achieving optimal control and efficiency in downhole operations is crucial. HOCA Oil Tools, at the forefront of downhole technology innovation, introduces its Plug Chokes for Tubing – specialized tools designed to revolutionize fluid flow control within the wellbore. Crafted with precision and built to meet the highest industry standards, our Plug Chokes are engineered to enhance the performance and safety of downhole operations. HOCA’s Plug Chokes for Tubing: Precision Control, Unmatched Durability Our Plug Chokes for Tubing are designed for operators who demand precise fluid flow control in their downhole operations. These tools are crucial for managing production rates, minimizing fluid losses, and optimizing well performance. Constructed from high-grade materials resistant to corrosion and wear, HOCA's Plug Chokes ensure reliability and durability under the harshest downhole conditions. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Plug Chokes for Tubing means choosing a solution that stands for innovation, efficiency, and reliability. Our commitment to excellence ensures that our products not only meet but exceed the demands of modern oilfield operations, providing our clients with tools that enhance their downhole success. Integrating our Plug Chokes into your downhole operations marks a step toward enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a strategic partner committed to supporting your operational challenges with advanced solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Plug Chokes for Tubing. Partner with us, and take your downhole operations to new heights of efficiency and performance. With HOCA Oil Tools, empower your downhole activities with tools that set new standards for reliability, control, and performance in the challenging oil and gas industry. View Details

6 5/8" Mech-2 Double Grip Mechanical Set Packer

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

2-1/2 inch Ambient Valve

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

3” Gas Fuel Isolation Valve

The 3” Gas Fuel Isolation Valve is a solenoid-pilot actuated sleeve-style valve designed specifically for aero-derivative gas turbines. It features a three-inch outlet flange and operates on dual voltage ranges of 24 or 95-140 VDC, providing flexibility for various power systems without compromising performance.

Constructed entirely from stainless steel, the valve complies with NACE standards for corrosion resistance, ensuring durability in harsh environments. It is engineered to withstand heat soak temperatures up to 300°F, making it suitable for high-temperature applications commonly found in turbine fuel systems.

Certified to CE-ATEX standards for Zone 2, Group IIA, Category 3, T3 temperature class, the valve is qualified for use in hazardous and explosive atmospheres, enhancing operational safety.

This valve acts as a critical safety device by isolating the fuel supply during emergency shutdowns or fuel system failures, preventing potential damage to the turbine. Typically deployed in pairs, it offers dual-redundancy to maintain safety even if one valve fails.

The valve is widely used in industrial gas turbine fuel systems where rapid and reliable fuel isolation is critical. Its design supports fast shutoff to prevent damage caused by fuel control failures or stuck throttle conditions. The valve’s durability and compliance with industry standards make it a dependable choice for maintaining operational safety in challenging environments.

View Details

HDI 3300 Temperature Gauge System

The HDI 3300 Temperature Gauge System is an intrinsically safe, battery-powered electronic temperature measurement device commonly used in oil and gas operations requiring precise temperature monitoring. Typical applications include high-pressure nitrogen pumping, geothermal and mud-based drilling, well control manifolds, flare stacks, and bulk liquid storage.

The system consists of a digital gauge display, sensor assembly, and interconnecting cable. The sensor, usually a Resistance Temperature Detector (RTD), is housed in a durable stainless steel case with various mounting options like 2-inch Male NPT, hammer unions, or flanges, allowing flexible installation near the temperature source.

The display features an LCD with numeric and analog bar graph outputs, providing temperature readings with 0.1-degree resolution and ±0.5% full-scale accuracy over a range of -50 to 150°C (-50 to 300°F). Users can switch between Celsius and Fahrenheit. It includes 4-20mA and 0-1 VDC output options for integration with remote monitoring, data logging, or control systems, and supports external power inputs.

Designed for ease of maintenance, the system is field-repairable with a replaceable battery pack. The sensor and display are factory-matched and calibrated, requiring recalibration if components are replaced. The gauge fits standard 6-inch panel cutouts and supports multiple mounting patterns. Cable lengths are customizable up to 200 feet or more.

The system operates reliably in temperatures from -40°C to +70°C and is certified for hazardous environments, with a rugged stainless steel sensor housing to withstand harsh field conditions.

The 3300 is well-suited for environments requiring precise, continuous temperature monitoring, including high-pressure drilling, well control, and fluid storage applications. Its intrinsically safe design provides dependable operation in hazardous locations without compromising safety. The solid-state electronics and durable construction reduce maintenance and downtime, while versatile mounting options allow placement close to the measurement point for accurate readings. Featuring clear numeric and bar graph displays along with remote output capabilities, the system supports timely decision-making and integrates easily with larger monitoring setups, enhancing process control and operational safety in demanding conditions.

View Details

ESP Dual Grip 9 5/8" Packer

The Ballycatter Model WC-ESP Dual Grip 9 5/8” Packer is a robust hydraulic-set packerbuilt for large-bore ESP completions in 9 5/8” casing. Designed for high-volume production and injection applications, this packer features bi-directional barrel slips that anchor it against pressure fluctuations and tubing movement, ensuring stability and well integrity.

The pass-through cable section enables a secure electrical connection to the ESP below, maintaining operational efficiency in high-flow rate wellbores. Its durable single-mandrel construction and Acner Array Packing Element provide exceptional resistance to high temperatures and corrosive environments, making it an ideal choice for challenging downhole conditions.

The WC-ESP Dual Grip 9 5/8” Packer is set hydraulically by applying tubing pressure against a plugging device, mechanically locking the slips and sealing elements in place. Its dual-grip anchoring system enhances stability, making it particularly suited for large-bore completions with significant tubing expansion and contraction forces.

The straight pull retrieval mechanism allows for efficient removal and reduced intervention costs, ensuring minimal downtime and operational efficiency. Compatible with all major ESP cable pack-off systems, this packer provides high-performance isolation and superior sealing integrity in large-diameter wells.

View Details

Valve Manifolds 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT is designed to provide a reliable and compact solution for connecting impulse lines to pressure transmitters and gauges. This manifold allows operators to safely isolate instruments from the process for maintenance, calibration, or testing, without the need to shut down the system. The T-type configuration features two valves that control flow to and from the instrument, enabling efficient block, bleed, and vent operations.

The pipe-to-pipe design ensures a direct connection to the piping system, which reduces potential leak points and simplifies installation. It is suitable for high-pressure applications, with a standard working pressure of 6000 PSI and options available for higher pressures. The manifold is built with a metal-to-metal body and bonnet seal for enhanced durability and temperature resistance, with materials that can comply with NACE MR 01 75 standards for corrosion resistance.

Additional features include a removable T-handle for low-torque operation, self-centering non-rotating stems for consistent shutoff, and a dust cap to prevent contamination. Packing is positioned below the stem threads to isolate the threads from the process media, and the stem’s rolled threads provide smooth operation and long life. The manifold is 100% factory tested for leakage and performance, ensuring reliable operation in critical oil and gas applications.

View Details

Drive Down Bailer

Enhance Your Downhole Recovery Operations with HOCA Oil Tools' Drive Down Bailers In the intricate world of oil and gas exploration and production, addressing downhole challenges with precision, efficiency, and innovation is key to operational success. HOCA Oil Tools specializes in the development and distribution of premium downhole slick line tools, including our high-performance Drive Down Bailers. Designed for the effective retrieval of debris, our Drive Down Bailers are indispensable for maintaining clear, productive wellbores. Drive Down Bailer: The Ultimate Solution for Debris Retrieval HOCA’s Drive Down Bailers are engineered for maximum efficiency in the removal of sand, debris, and other obstructions from wellbores. These tools are crucial in situations where traditional bailers fail, offering a proactive solution to maintain well integrity and operational flow. Constructed from robust materials, our Drive Down Bailers withstand the harsh downhole conditions, ensuring reliability and durability. Empower Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with tools that solve real-world challenges. Our Drive Down Bailers are a testament to our commitment to innovation, quality, and customer satisfaction. By incorporating these bailers into your operations, you can expect not only to resolve downhole debris issues but also to enhance the overall efficiency and safety of your wellbore maintenance tasks. Investing in HOCA's Drive Down Bailers means choosing a partner committed to your operational success. Embrace the future of downhole operations with HOCA Oil Tools, where efficiency, reliability, and customer satisfaction drive everything we do. Experience the difference in your downhole operations with HOCA's Drive Down Bailers – your solution to maintaining clear, efficient, and productive wells. Trust in HOCA Oil Tools for unmatched downhole solutions that propel your operations forward. View Details

ROV Communications Systems

Stay Connected with Advanced ROV Communications Systems In the dynamic world of subsea exploration and robotics, seamless communication is the key to success. We understand the critical role that robust and reliable communication systems play in the success of your Remote Operated Vehicle (ROV) missions. That's why we are thrilled to introduce our state-of-the-art ROV Communications Systems, designed to keep you connected and informed throughout your underwater operations. A Complete Communication Solution Our ROV Communications Systems are more than just individual components – they are a complete and integrated solution. The system includes telemetry units, a cutting-edge 3kV step-down transformer, and a Coarse Wave Division Multiplexer (CWDM) assembly that seamlessly feeds them. These components are carefully installed as a system and are ready to be wired, ensuring a hassle-free setup process and maximum performance. Robust Telemetry Units The heart of our ROV Communications Systems lies in our advanced telemetry units. These units are built to withstand the harsh subsea environment and are tested rigorously to ensure top-notch performance. Equipped with multiple Ethernet, video, and serial connections, our telemetry units provide a robust communication interface for your ROV, enabling seamless data transfer, control, and feedback during your underwater missions. 3kV Step-Down Transformer and CWDM Assembly Our innovative 3kV step-down transformer is a key component of the communication system. It allows for efficient and safe voltage reduction, ensuring that your subsea equipment receives the power it needs without compromising safety. The Coarse Wave Division Multiplexer (CWDM) assembly further enhances the system's capabilities by providing high-speed optical communication links, allowing for increased data capacity and transmission rates. Reliable and Efficient Integration We pride ourselves on delivering products that are not only technologically advanced but also user-friendly. Our ROV Communications Systems are pre-integrated and designed to seamlessly work together, saving you time and effort during installation and setup. With our system, you can rest assured that your ROV's communication infrastructure is optimized for performance and reliability. Unleash the Power of Communication Experience the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Whether you are conducting scientific research, performing subsea inspections, or engaging in search and rescue operations, our communication solutions will keep you connected, informed, and in control. Say goodbye to communication challenges and embrace a new level of efficiency and effectiveness in your underwater missions. Choose Poseidon Robotics With a legacy of excellence and innovation. Our commitment to quality, reliability, and customer satisfaction drives us to deliver cutting-edge solutions that exceed expectations. Join the growing community of satisfied customers and elevate your ROV operations with advanced communication systems. Stay Connected, Stay Successful Don't let communication gaps hinder your subsea missions. Embrace the power of seamless communication with ROV Communications Systems. Contact us today to learn more about our products and how they can enhance your underwater operations. View Details

Transport Trucking services for local and international equipment hauling

Transport trucks for long haul equipment moves. Specializing in international and express shipments. Since truck transportation effectively remains the most direct solution for the transport of your goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. If you need to get your goods from one place to another in a safe, reliable and cost effective way then truck transportation is hard to beat. So hard in fact that transporting goods by truck is still the most widely used mode of transport in Canada and North America. Contact us to arrange your next rig move or industrial equipment shipment. View Details

Monoflange SBB Double Block & Bleed Valve – Flange x Thread – OS&Y Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange SBB Double Block and Bleed Valve with Flange x Thread connections features an OS&Y isolation valve and a needle drain, providing dual isolation in a single compact assembly. It is designed for oil and gas applications where safe venting of trapped pressure between isolation points is required, such as instrument or gauge isolation, chemical injection, and sampling lines.

The valve’s monoflange design integrates both isolation and venting functions in one unit, reducing the number of joints and potential leak paths while saving space and simplifying installation. The OS&Y isolation valve offers clear visual indication of open or closed status, allowing operators to quickly verify valve position. The needle drain provides controlled venting of pressure trapped between the isolation points, ensuring safe operation during maintenance or sampling procedures.

The valve is suitable for flange sizes from 1/2” to 2” and pressure classes from 150 to 2500, with options for reduced or full bore depending on process requirements. It is available in a variety of materials including stainless steel 316, 316L, duplex, super duplex, Hastelloy, Inconel, and Monel, and can be manufactured to meet NACE MR-0175 standards. The design complies with recognized standards such as ASME B16.34, API 6D, and ISO 17292, and is tested to low emission requirements.

This configuration is ideal for oil and gas operations requiring reliable dual isolation, precise venting, and compact installation in critical piping systems.

View Details

Wireless Infrastructure Design and Implementation

Redefining Wireless Infrastructure for the Oil & Gas Sector: Nulux Network Solutions Leads the Way In the modern era of the oil and gas industry, the intricate operations and vast terrains involved necessitate a robust, efficient, and secure communication network. As reliance on digital solutions becomes more pronounced, so does the need for seamless wireless infrastructure. With Nulux Network Solutions at the helm of wireless infrastructure design and implementation, the oil and gas sector can now look forward to tailored solutions that guarantee optimum connectivity. Bridging Distances and Overcoming Obstacles Geographical distances, challenging terrains, and myriad obstacles are inherent to the oil and gas industry. In such scenarios, traditional hard-line connections might prove ineffective, expensive, or even impossible. This is where Nulux’s expertise in wireless communication links becomes invaluable. With a proven track record of designing and implementing both point-to-point and multipoint radio networks, along with tower construction, rigging, and mesh networks, Nulux offers unparalleled solutions that ensure constant, uninterrupted connectivity. Harnessing the Power of Wireless Access Points As workplaces in the oil and gas sector become more dynamic, the dependency on mobile devices for tasks such as documentation review, QA-QC, and project planning is intensifying. Recognizing this need, Nulux offers top-tier wireless network designs that ensure every corner of your facility, be it the office or the expansive facility floor, remains connected. This not only boosts productivity but also paves the way for substantial time and cost savings. Point-to-Point Vs. Multipoint: Customized Solutions for Diverse Needs Understanding the distinction between point-to-point and multipoint networks is vital. While the former establishes a dedicated link between two distinct points ensuring utmost security and streamlined communication, the latter connects multiple points through a single shared line, facilitating broad-spectrum connectivity. Key Benefits of Opting for Nulux’s Wireless Infrastructure: Boosted Productivity: Seamless connectivity ensures that all personnel, regardless of their location, have unhindered access to centralized data, thereby accelerating operations. Enhanced Security: The private nature of point-to-point networks shields data from potential interceptions, guaranteeing safe data transfers. Cost-Effective Solutions: Especially in scenarios where traditional hard-line installations are impractical, wireless networks present a more economical and feasible option. In conclusion, the sophisticated nature of operations in the oil and gas industry demands nothing short of excellence in communication infrastructure. With Nulux Network Solutions, engineering professionals can expect wireless infrastructure designs that are not only advanced and reliable but are also tailor-made for the unique challenges of the sector. As the industry evolves and the need for reliable wireless tech surges, Nulux remains steadfast in its commitment to stay ahead, ensuring that the oil and gas sector remains seamlessly connected, always. Connect with us today, and let's build the future of wireless communication together. View Details

Injection Safety MC Valve 2-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Injection Well Subsurface Safety Valve WI 4.89

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

SEM SDR Rust Remover

Introducing SEM SDR Rust Remover, the revolutionary rust removal technology that is changing the game in the steel industry. Developed from proven nuclear industry and engineering pre-commission operations, this water-based, safe and non-toxic product is flexible and effective on all grades of steel. SEM SDR Rust Remover is unlike any other rust removal product on the market. With a neutral pH and non-corrosive properties, it is safe for use on all steels, metals and engineering polymers. When used as directed, SEM SDR effectively removes all rust to leave behind a super clean, virgin metal surface. What sets SEM SDR apart is its ability to impart a degree of corrosion resistance to the treated surface. This helps to prevent flash rusting after cleaning, providing long-lasting protection for your valuable assets. To ensure the best results, it is recommended to degrease the metal surface before treatment with SEM SDR. This can easily be achieved with a surfactant or wash. Don't settle for less when it comes to rust removal. Choose SEM SDR Rust Remover and experience the power of advanced technology and superior results. View Details

7 5/8" HP-6 Hydraulic Set High Angle Production Packer for 20-24 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

HT-2 Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool.\r\n\r\nT Tubing Hanger\r\nThe T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling.\r\n\r\nT-CL Tubing Hanger\r\nThe T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style.\r\n\r\nC-SRL-CL Tubing Hanger\r\nThe C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools.\r\n\r\nCXS Tubing Hanger\r\nThe CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

Double Block & Bleed Valve – Flange x Flange – Ball Isolation with Needle Drain – 1/2” (DN 15) – Class 150 – ASME B16.34 / API 6D / ISO 17292

The Double Block & Bleed Valve with Flange x Flange connections and Ball x Ball isolation with Needle drain is designed to provide reliable dual isolation in oil and gas applications. This valve allows two points of isolation in a single assembly, reducing leak paths and ensuring safe maintenance downstream of the first isolation point. The integrated needle drain safely vents any trapped pressure between the two isolation valves.

This valve is available in flange sizes from 1/2” (DN 15) and can be used in applications requiring Class 150 ratings. Reduced and full bore options are offered to accommodate varying flow requirements. The design is suitable for direct or remote mounting of instruments, chemical injection connections, gauge isolation, instrument drains, and piping/instrument interfaces.

Manufactured in materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, the valve can also meet NACE MR-0-175 requirements where corrosion resistance is necessary. The assembly conforms to recognized standards including ASME B16.34, API 6D, and ISO 17292. Its compact design allows easier installation in space-constrained environments while minimizing stress from loading or vibration.

This configuration is particularly useful in oil and gas operations where dual isolation is needed for maintenance, sampling, or chemical injection, providing a safe and efficient solution in instrument and piping systems.

View Details

Gas Check Valve for LM2500 Gas Turbine

The Gas Check Valve is a unidirectional valve used in LM2500 gas turbine systems to prevent the reverse flow of combustion gases into critical fuel and oil lines. Its primary function is to maintain the correct flow direction, ensuring that gases only travel toward the combustion chamber and not back into upstream components, where reverse flow could cause damage, safety risks, or system inefficiencies.

This check valve is engineered to operate under the high-pressure and high-temperature conditions typical of industrial gas turbine environments. It serves as a passive safety component, requiring no external power to function, and contributes to the overall reliability and integrity of the turbine system.

Commonly found in aero-derivative gas turbines used in oil and gas applications, the check valve is essential for maintaining proper system performance. Its inclusion in the turbine’s gas path helps ensure safe operation by minimizing the risk of combustion gas contamination in auxiliary systems.

View Details

Needle Valves Integral Bonnet Series – Male x Female – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Integral Bonnet Series – Male x Female is designed for reliable and precise flow control in industrial applications, particularly in oil and gas. Its integral bonnet construction means the body and bonnet are a single piece, eliminating welds and enhancing overall strength, safety, and durability. This design ensures consistent performance under high-pressure conditions and reduces the risk of leakage or mechanical failure.

The Male x Female configuration allows for straightforward installation into piping systems, with the male end threading securely into a female port. This connection type is widely used in process lines, instrumentation, and control systems where accurate flow adjustment, isolation, or sampling is required.

These valves feature a removable T-handle for easy actuation with low torque, rolled stem threads for smooth operation and long service life, and fully supported packing to minimize maintenance. A self-centering, non-rotating stem tip ensures bubble-tight shutoff, while the mirror-finished stem reduces wear on packing and facilitates smooth operation. Optional stellite-tipped stems are available for applications involving abrasive or corrosive fluids, further extending the valve’s lifespan.

This series is ideal for applications requiring precise flow control, reliable sealing, and long-term durability in harsh environments such as high-pressure oil and gas systems, chemical process lines, and instrumentation panels.

View Details

OCTG Tubing from 2 3/8 inch to 7 inch for oil and gas well completions

OCTG (Oil Country Tubular Goods) refers to the piping products that are used in oil and gas production and drilling activities. OCTG pipe normally is manufactured based on API specifications. Oil country tubular goods (OCTG) is a family of seamless rolled products consisting of drill pipe, casing and tubing subjected to loading conditions according to their specific application. Tubing is the pipe placed in the well that is exposed to flowing fluids from the reservoir to surface. It is uncemented and able to pulled and replaced in the event the pipe erodes or corrodes. Our international network of manufacturers and warehouses have almost all weights and grades in stock. View Details

Pumpjack C-320D-256-144 for application in the majority of oil wells

The Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit. These units are simple to operate and require minimum maintenance. Unit Size C-320D-256-144 A 120.00 B 180.00 C 260.00 E 215.25 F 353.75 H 398.00 I 32.75 J 110.00 L 72.50 M 76.00 N 21.13 N1 16.13 R 136.88 T 34.00 U 98.63 V 52.00 W 43.00 X 112.50 AA 53.625 AB 93.00 UU 31.00 VV 48.25 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, all brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. View Details

HDI 2250 Valve Position Indicator System

The HDI 2250 Valve Position Indicator System provides a reliable method to monitor the open or closed status of manual and hydraulically operated gate valves on choke manifolds. It offers two modes of position verification: a clear visual indicator mounted directly on the valve, and an electronic signal transmitted remotely to control rooms or monitoring systems. This dual feedback delivers real-time valve position information both locally and from a distance, enhancing operational control and safety.

The system is compatible with a wide range of rising and non-rising stem gate valves from various manufacturers, adding position monitoring without compromising valve integrity or certification. An adapter enables installation on valves that lack built-in position feedback. The sensor is an inductive Namur type housed within a rugged 316 stainless steel case, engineered for hazardous oilfield environments. It operates on a 5 to 25 volts DC power supply, making it suitable for integration with most industrial control systems.

Weighing 15.3 pounds with the junction box mounted, the 2250 is built for durability and long-term performance in demanding onshore and offshore conditions. Once installed, it requires minimal maintenance, reducing operational downtime.

The system connects easily to local displays and remote monitoring platforms, offering a comprehensive view of valve positions across the manifold. It supports both Namur and proximity sensors, providing flexibility to meet different installation requirements.

The 2250 stands out for its ability to retrofit manual valves without modification, its robust construction for harsh environments, and dual visual and electronic position reporting. These features make it a practical, dependable choice for improving safety and operational awareness in oil and gas valve management.

View Details

CBL-VDL

Elevating Well Integrity Analysis with InWaTec Combined's CBL-VDL Services Ensuring a solid cement bond between casing and the wellbore is not just a procedural step; it's a critical factor in well integrity that demands the most meticulous evaluation techniques. InWaTec Combined’s Cement Bond Logging (CBL) and Variable Density Logging (VDL) Services offer a refined approach to acoustic well logging, a method that has been a research focal point due to its importance in ascertaining well safety and functionality. Cement bonding evaluation can be segmented into two categories based on tool source frequency: the sonic method (around 20 kHz) and the ultrasonic method (several hundred thousand Hz). The sonic method, a technique that has stood the test of time since its introduction in 1963, provides a qualitative or semi-quantitative analysis of the cement bond. It involves the excitation of a sonic wave and measurement of its attenuation along the borehole axis, with the degree of attenuation reflecting the quality of shear coupling behind the casing. Simply put, the greater the attenuation, the better the bond. CBL specifically focuses on the attenuation factor derived from the first arrival amplitude, offering a snapshot of the bond's integrity. In contrast, VDL takes into account the full waveform amplitude, providing a more detailed and denser representation of the bond quality. These dual measurements, with industry-standard receiver spacings of 3-ft for the casing wave and 5-ft for the full wave, allow for a comprehensive analysis of the cement bond. InWaTec Combined's CBL-VDL Services employ these methodologies with precision-engineered tools that capture high-resolution data, enabling our experts to discern even subtle variations in bonding conditions. This data is not merely numbers on a log; it's a story of the well's integrity, revealing areas of potential concern that can be proactively addressed to prevent non-productive time and ensure operational safety. By leveraging the combined strengths of CBL and VDL, InWaTec Combined provides clients with a robust assessment of their cementation quality. The detailed logs produced not only satisfy regulatory requirements but empower operators with actionable insights to optimize their well construction and maintenance strategies. Choose InWaTec Combined's CBL-VDL Services for your cement bond evaluation needs and gain peace of mind with our thorough, reliable, and cutting-edge acoustic logging solutions. Our commitment to excellence in well logging means that when it comes to well integrity, you're not just meeting industry standards—you're setting them. View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type