Ballycatter.ca - Industrial Equipment

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Pneumatic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Hardhat Clip Mount

Secure Your Lighting with Wisdom's NWI-NS-HMC4 Hard Hat Clip Mount – Now Available at Provix Provix is excited to introduce the Wisdom NWI-NS-HMC4 Hard Hat Clip Mount, a practical and robust accessory designed for miners and construction workers. This clip mount is an essential tool for anyone who requires reliable and secure mounting of lighting equipment on their hard hats. Effortless Installation and Strong Adhesion The NWI-NS-HMC4 Hard Hat Clip Mount is equipped with 3M adhesive, known for its strong bonding capabilities. This ensures a secure attachment to any hard hat, providing a stable and sturdy base for mounting mining lamps or other light sources. The ease of installation allows users to quickly set up their equipment without the need for additional tools or complicated procedures. Designed for Durability and Compatibility Crafted with high-quality materials, the Wisdom Hard Hat Clip Mount is built to withstand the tough conditions often encountered in mining and construction environments. Its robust design ensures that it can hold up against daily wear and tear, making it a reliable accessory for any professional. Versatile and Convenient This clip mount is not only durable but also versatile. It is designed to be compatible with a wide range of headlamps and mining lamps, making it a universal solution for various lighting needs. Its compact size and lightweight nature ensure that it doesn’t add bulk or weight to the hard hat, maintaining comfort for the user. Enhance Your Safety and Efficiency The NWI-NS-HMC4 Hard Hat Clip Mount enhances safety by ensuring that your headlamp stays securely in place, providing consistent illumination without the risk of it falling or shifting. This stability is crucial for efficient and safe working conditions, especially in low-light environments. Get Yours Today Upgrade your safety gear with the Wisdom NWI-NS-HMC4 Hard Hat Clip Mount from Provix. Visit our website at www.provix.net to learn more about this essential accessory and explore our range of mining and construction equipment. Secure your lighting and enhance your work safety and efficiency with Wisdom's reliable products. View Details

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

Electric Submersible Pump ESP Packer – 7" – 3,500 PSI

The 7" ESP Packer is a single-mandrel, dual-bore, hydraulic-set production packer set in place using hydraulic pressure applied through the tubing. The dual-bore configuration includes a pass-through section that allows the electric cable to reach the ESP pump below the packer while maintaining isolation between the tubing and the annulus, enabling reliable deployment and operation of the ESP system for artificial lift in oil and gas wells.

The packer has bi-directional, case-carburized barrel slips that anchor it securely against well pressures from both above and below, preventing movement during operation. It can be retrieved with a straight upward pull on the tubing string and is available in both straight-pull and cut-to-release configurations to suit different well conditions.

The packer has a nominal size of 7" and fits 7" casing weighing 26–32 PPF or 7-5/8" casing weighing 55.3 PPF. The outer diameter is 5.970", and the main bore inner diameter is 2.992". The assembly allows up to five feed-through lines for electric cables or injection lines, and the total length is 125".

The body is made from L80 material with HNBR elastomer seals, rated for pressures up to 3,500 PSI and temperatures from 70°F to 300°F. Connections include a 3-1/2", 9.2 PPF VAM TOP box at the top and a 3-1/2", 9.2 PPF VAM TOP pin at the bottom. The release weight is 68,800 lbs. The packer meets API Validation Grade V3 and Quality Level QL1 standards, providing reliable performance under standard service conditions.

These attributes make the ESP packer reliable for high-load applications, adaptable to various completion designs, and efficient in facilitating ESP deployment in oil and gas wells.

View Details

Check Valve Poppet Type – Male x Female 1/4" NPT – 6000 PSI – ISO 9001

The 1/4" poppet type check valve with male × female NPT connections is designed to allow fluid flow in one direction while preventing backflow in oil and gas systems. Its poppet design provides fast response and reliable sealing under pressure, ensuring protection of pipelines, pumps, and other critical equipment from damage caused by reverse flow or pressure fluctuations.

The 1/4" size is ideal for small diameter lines, instrumentation, sampling, or control applications where space is limited and precise flow control is required. Male × female connections allow secure inline installation and integration into existing piping without the need for additional fittings, reducing potential leak points and simplifying system layout.

Factory tested for cracking and reseal performance, the valve has a standard working pressure of 6000 psi, with optional ratings up to 10000 PSI. It offers selectable cracking pressures from 1/3 to 25 psi, making it adaptable to various flow requirements. The valve is available in corrosion resistant materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, suitable for demanding oil and gas environments. Heat code traceability ensures quality and material verification, and additional testing options including vibration, temperature, and helium testing are available for critical applications.

View Details

6 5/8" Mech-1 Single Grip Mechanical Set Packer

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

LM2500 Cylindrical Roller Bearing R6

The Bearing, Roller, Cylindrical No. 6R is a precision-engineered component used in LM2500 aero-derivative gas turbines commonly employed in the oil and gas sector. Installed at the No. 6R position, this cylindrical roller bearing supports the turbine’s rotor shaft by carrying radial loads and maintaining accurate shaft alignment during high-speed operation.

Its specialized roller design allows it to withstand intense mechanical stresses and thermal changes typical in demanding oil and gas environments. By reducing vibration and ensuring smooth rotation, the bearing contributes to stable and efficient turbine performance, which is critical for continuous operation in upstream, midstream, and downstream applications.

The No. 6R bearing’s role in maintaining precise shaft positioning supports the overall durability and reliability of LM2500 turbines used in gas compression, power generation, and offshore platforms, making it a key element in sustaining safe and efficient operations within the oil and gas industry.

View Details

Tube Fittings Male Elbow ISO Tapered Thread – 1/4”, 5/16”, 3/8”, 1/2" – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Tube Fittings Male Elbow ISO Tapered Thread is a 90° angled fitting designed to connect tubing in systems where a change of direction is required. It features ISO standard tapered threads that create a tight, leak-resistant seal without the need for additional gaskets. Manufactured from high-quality materials, the fitting ensures durability and consistent performance under vibration, pressure fluctuations, and harsh industrial conditions.

Its compact elbow design allows for space-efficient installations, making it suitable for piping layouts with limited room. The fitting is precision-machined for proper alignment and easy assembly, ensuring the tubing sits securely and maintains a smooth flow path. Typical applications include oil and gas systems, chemical plants, and other process industries where reliable flow direction changes are essential. The male elbow also simplifies maintenance and reconfiguration since it can be easily disassembled and reinstalled without compromising the seal.

View Details

API-611 Steam Turbine

Elevate Your Operations with Kessels API-611 Compliant Steam Turbine: Where Precision Meets Excellence In the demanding realm of the oil and gas industry, precision, reliability, and adherence to standards are paramount. Kessels Steam Turbines takes pride in being a premier supplier of Steam Turbines that not only comply with but exceed the rigorous API-611 standards for general-purpose steam turbines. Setting New Standards in Steam Turbine Excellence Kessels Steam Turbines are at the forefront of driving pumps, fans, and compressors in Oil Refineries across the Middle East, India, and South East Asia. These turbines stand as testaments to our unwavering commitment to adhering to stringent design engineering practices set by oil giants and discerning end customers alike. Distinguishing Features of Kessels API-611 Single Stage Steam Turbines: Meets & Exceeds API-611 Standard: Our turbines not only meet but go beyond the API-611 standard, ensuring top-notch performance and reliability. Direct Drive Oil Relay Governors: Equipped with provisions for Direct Drive Oil relay constant speed governors conforming to NEMA class 'A' & NEMA class 'D'. Over Speed Mechanical Trip: Safety is paramount, and our turbines come with an over-speed mechanical trip with safety shut-off as standard. Versatile Gland Sealing: Gland sealing is achieved through carbon rings (up to six, removable), labyrinths, or mechanical steam seals. We offer the flexibility of choosing any combination of these three options. Impulse-Type Wheels: Provision for Single disc single-row, and Single disc two-row Curtis impulse-type wheels made of forged steel. Built-in Steam Strainer: As a standard feature, our turbines include a built-in steam strainer that is removable for your convenience. Versatile Support: Our turbines can be centerline or foot-mounted, offering flexibility in installation. Solenoid Trips: Provision for solenoid trips for remote shutdowns comes as standard, ensuring safety and control. Suitable for High Pressures: Built to handle high inlet and exhaust steam pressures, our turbines are robust and reliable. Horizontal and Vertical Orientation: Choose between horizontal and vertical shaft orientation to suit your specific needs. These features are a testament to our unwavering commitment to ensuring that customers can operate Kessels API-611 compliant Steam Turbines with complete peace of mind for their mechanical driving needs. Choose Kessels for Unparalleled Excellence Choosing Kessels Steam Turbines is a choice for excellence, precision, and reliability. Our API-611 Compliant Steam Turbines not only meet industry standards but surpass them, ensuring the highest levels of performance and safety for your operations. Empower Your Operations with Kessels In the competitive landscape of the oil and gas industry, precision and reliability are non-negotiable. Elevate your operations with the Kessels API-611 Compliant Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Lamp KL5MS MSHA

Introducing the Wisdom KL5MS MSHA Corded Miner's Cap Lamp – A New Standard in Mining Safety and Efficiency, Exclusively from Provix Provix is excited to unveil the latest addition to its range of high-quality mining equipment – the Wisdom KL5MS MSHA Corded Miner's Cap Lamp. This innovative product is not just a lighting solution; it's a commitment to safety, efficiency, and reliability in the demanding world of mining. Exceptional Lighting for Enhanced Safety Equipped with a powerful 7,800mAh battery, the KL5MS MSHA guarantees 13 hours of continuous lighting, ensuring that miners are never left in the dark. The main light LED, with a working voltage of 3.0V and current of 640mA, delivers a luminous flux of 340 lm. The impressive lighting degree of 18,000 lx at 1 meter enhances visibility significantly, making it a vital tool for miners. MSHA & ATEX M1 Certified for Maximum Safety The KL5MS MSHA goes above and beyond when it comes to safety. It is both MSHA (Mine Safety and Health Administration) and ATEX M1 certified, meeting the highest safety standards in the mining industry. This certification underscores our commitment to providing equipment that ensures the utmost safety of miners in potentially hazardous environments. Built to Last in Harsh Conditions Durability is a key feature of the KL5MS MSHA. The lamp has a main light lifespan of 50,000 hours and an auxiliary light lifespan of 40,000 hours. Its IP68 water-proof rating and explosion-proof design make it ideal for use in various mining conditions. Additionally, the battery life spans 1,200 cycles, ensuring long-term reliability. Ergonomically Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), the KL5MS MSHA is designed for comfort. Its compact dimensions (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure it is not cumbersome, allowing for mobility and ease during long shifts. Efficient and Convenient Charging The KL5MS MSHA is as practical as it is powerful. It features a convenient USB charging system, enabling quick and easy recharging. The charging time of 4 to 7.5 hours ensures the lamp is ready for use with minimal downtime. Get Yours Today The Wisdom KL5MS MSHA Corded Miner's Cap Lamp is available now at Provix. Visit our website at www.provix.net, call us, or email for more information. Elevate your mining operations with the Wisdom KL5MS MSHA – where safety and efficiency meet. View Details

Bailer Sampling

InWaTec Combined: Streamlining Wellbore Clarity with Premier Sample Bailer Services In the ever-evolving landscape of drilling and production, the importance of maintaining a clean wellbore is paramount. At InWaTec Combined, we understand that the efficiency of your operations hinges on the clarity of the wellbore. That's why we offer comprehensive Sample Bailer running services, designed to support operations on drilling rigs, during workover operations, and in production wells, whether onshore or offshore. Optimizing Wellbore Integrity with Bailing Operations Bailing operations are a critical component of wellbore maintenance, aimed at collecting solids and cleaning the wellbore to ensure uninterrupted operations. InWaTec Combined's Sample Bailer services are tailored to meet the needs of any operation, providing a thorough cleansing of the wellbore and collection of solids that could otherwise impede production or damage equipment. Adaptable Services for Diverse Environments Whether it's the dynamic environment of offshore rigs or the structured demands of onshore wells, InWaTec Combined's Sample Bailer services are adaptable to any setting. Our equipment and expertise are suited to the unique challenges presented by both drilling and production phases, ensuring that we provide optimal solutions regardless of the environment. Leveraging Technology for Efficient Operations At InWaTec Combined, we utilize the latest technology in our Sample Bailer running services. This approach allows us to efficiently collect wellbore debris and samples, minimizing downtime and maximizing the productivity of the well. Our commitment to technological advancement means that we continuously improve our services to stay at the forefront of the industry. Safety and Environmental Stewardship We prioritize safety and environmental stewardship in all our operations. Our Sample Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of eco-friendly operations, especially in sensitive onshore and offshore locations. InWaTec Combined’s Commitment to Excellence Choosing InWaTec Combined for your bailing needs means partnering with a company that is committed to excellence. Our Sample Bailer running services are designed to deliver results with precision, safety, and environmental responsibility at the forefront. We are dedicated to providing services that not only meet but exceed industry standards. Conclusion: Your Clear Choice for Clear Wells In summary, InWaTec Combined’s Sample Bailer running services represent the highest standard in wellbore cleaning and sample collection. With our advanced technology, adaptable services, and unwavering commitment to safety and the environment, we are your clear choice for ensuring the integrity and productivity of your wells. Trust InWaTec Combined to deliver clarity and quality to your wellbore operations. View Details

Halliburton SP 7 inch TR-SCSSSV

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

Professional Hand Controller

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 28-32 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Tubing Hanger Coupling - 4 ½” to 2 7/8”

The 4 ½ x 2 7/8” Tubing Hanger Coupling is a specialized connection component used in oil and gas wellhead systems to join two different sizes of upset tubing—4 ½-inch and 2 7/8-inch. This size combination is commonly selected when there is a need to transition from a wider tubing hanger profile to a smaller production string, without significantly restricting flow or compromising mechanical strength. The slightly larger 2 7/8” production tubing allows for greater internal flow area than smaller alternatives, making this configuration well-suited for completions that aim to support moderate to high production rates.

The coupling is designed with a union nut mechanism, which enables installation without rotating the Christmas tree or disturbing other surface equipment. This simplifies operations, especially in space-limited or sensitive surface environments. Both the top and bottom threads of the coupling can be manufactured to meet specific customer requirements, ensuring compatibility with a range of tubing string designs. Additionally, the coupling is threaded to accommodate a back pressure valve, offering an important safety feature by allowing well pressure to be managed during maintenance or pressure control procedures.

Constructed from high-grade steel and compliant with API standards, the 4 ½ x 2 7/8” Tubing Hanger Coupling offers high durability, corrosion resistance, and the mechanical integrity required for challenging downhole conditions. By supporting a secure, pressure-tight connection between tubing sizes, it plays a key role in maintaining well integrity and operational efficiency in various oil and gas production scenarios.

View Details

Tubing Inspection

Ensuring Production Integrity with InWaTec Combined's E-Line Tubing Inspection Services In the lifecycle of oil and gas wells, tubing integrity is fundamental to ensuring consistent production and operational safety. At InWaTec Combined, we offer specialized E-Line Tubing Inspection Services to preemptively identify and mitigate risks associated with tubing failure, utilizing state-of-the-art diagnostic techniques to safeguard your assets. Tubing failures, which can stem from deformation, physical wear, or corrosion, pose a significant threat to well integrity and production. Our advanced inspection services are designed to detect these issues early, enabling timely interventions that maintain continuous well performance. Our comprehensive suite of E-Line Tubing Inspection Services includes: Cased-Hole Calipers: These tools provide precise measurements of the internal diameter of tubing, detecting anomalies and changes that could indicate deformation or wear. Flux-Leakage Tools: Specialized for identifying defects in ferrous tubulars, these tools locate areas of metal loss or corrosion by detecting disruptions in magnetic flux. Electromagnetic Phase-Shift Tools: By measuring the changes in electromagnetic fields, these tools can effectively pinpoint areas of wall thickness changes due to corrosion or wear. Ultrasonic Tools: Employing high-frequency sound waves, these tools are adept at measuring tubing wall thickness, identifying areas at risk of thinning, which could lead to potential collapse. In addition to these, our E-Line Tubing Inspection Services also employ ultrasonic radial-cement-evaluation and modified openhole-imaging devices, which are particularly effective in assessing the condition of the tubing for signs of internal or external metal loss—a crucial step in preventing unexpected well shut-ins. At InWaTec Combined, we understand that the stakes are high when it comes to maintaining well integrity. Our E-Line Tubing Inspection Services are not just about identifying problems; they're about delivering peace of mind. By utilizing our advanced diagnostic tools, operators can rest assured that the integrity of their production tubing is being monitored with the utmost precision, allowing them to focus on maximizing output and efficiency. Choosing InWaTec Combined means partnering with a company that places a premium on innovation, safety, and reliability. Our commitment to excellence ensures that your operations benefit from the latest in inspection technology, delivered by a team of seasoned professionals. Trust us to provide the insights you need to keep your wells flowing safely and smoothly, today and into the future. View Details

ESP Dual Grip 9 5/8" Packer

The Ballycatter Model WC-ESP Dual Grip 9 5/8” Packer is a robust hydraulic-set packerbuilt for large-bore ESP completions in 9 5/8” casing. Designed for high-volume production and injection applications, this packer features bi-directional barrel slips that anchor it against pressure fluctuations and tubing movement, ensuring stability and well integrity.

The pass-through cable section enables a secure electrical connection to the ESP below, maintaining operational efficiency in high-flow rate wellbores. Its durable single-mandrel construction and Acner Array Packing Element provide exceptional resistance to high temperatures and corrosive environments, making it an ideal choice for challenging downhole conditions.

The WC-ESP Dual Grip 9 5/8” Packer is set hydraulically by applying tubing pressure against a plugging device, mechanically locking the slips and sealing elements in place. Its dual-grip anchoring system enhances stability, making it particularly suited for large-bore completions with significant tubing expansion and contraction forces.

The straight pull retrieval mechanism allows for efficient removal and reduced intervention costs, ensuring minimal downtime and operational efficiency. Compatible with all major ESP cable pack-off systems, this packer provides high-performance isolation and superior sealing integrity in large-diameter wells.

View Details

Long Stroke Hydraulic Pumping Unit

In the last few years, thanks to intense engineering studies, Sivam has designed and manufactured the Long Stroke Hydraulic Pumping Unit to maximize the efficient recovery of oil from wells completed with sucker rods. One of the main advantages of the Long Stroke Hydraulic Pumping Unit compared to a conventional Beam Pump is the longer stroke length results in less pump cycles per barrel resulting in higher pump efficiency and less wear and tear on the downhole components. Installation of the Long Stroke Hydraulic Pumping Unit is quick and simple. Installation averages just 3 hours and civil work is not required. The light weight of the unit (under 3 tonnes) and small footprint (it is mounted on the X-mas Tree) provides a artificial lift pumping unit that can be used in well testing or offshore platform applications (dual barrier policy can be achieved when used in conjunction with our rod sentinel SCSSSV). View Details

Wax Knife

Experience Unmatched Efficiency in Wellbore Cleaning with HOCA Oil Tools' Wax Knife In the highly specialized field of downhole operations, the quest for efficiency, precision, and reliability is ongoing. At HOCA Oil Tools, we understand the challenges faced by the oil and gas industry and are committed to providing solutions that not only meet but exceed these demands. A shining example of our commitment to innovation and quality is our Wax Knife, a pivotal tool designed for effective wellbore cleaning, particularly in the removal of paraffin buildup. HOCA’s Wax Knife: Tailored for Optimal Wellbore Maintenance The HOCA Wax Knife is expertly engineered to address the common yet critical issue of wax accumulation within wellbores. Crafted from premium materials and designed with precision, our Wax Knife ensures the thorough and efficient removal of wax, thereby maintaining optimal well performance. Ideal for a range of well conditions and compatible with various slick line diameters, the HOCA Wax Knife is a versatile tool essential for maintaining well integrity and flow. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with innovative and reliable downhole solutions. Our Wax Knife exemplifies this dedication, offering a blend of efficiency, effectiveness, and durability that is unmatched in wellbore maintenance. Integrating the HOCA Wax Knife into your downhole maintenance regimen is not just an investment in a tool but an investment in the continued productivity and safety of your operations. Our commitment to excellence ensures that each Wax Knife we deliver meets the rigorous demands of downhole environments and helps our clients achieve their operational objectives with greater ease and efficiency. Discover the difference that a HOCA Wax Knife can make in your downhole maintenance operations. Choose HOCA Oil Tools for your wellbore cleaning needs and experience the highest standards of quality, efficiency, and customer service in the industry. Step up your well maintenance game with HOCA Oil Tools’ Wax Knife – the key to maintaining optimal well performance and operational safety. Contact us today to learn more about how our downhole solutions can revolutionize your operations. View Details

ATEX Group II, Battery

Power Your Work with the ATEX Group II Battery – A High-Performance Solution from Provix Provix is proud to present the ATEX Group II Battery (Part # NWI-WLAMP3A-ATEX), a powerful and reliable energy source designed specifically for use in challenging industrial environments. This battery is an ideal choice for professionals who require dependable and long-lasting power for their mining and construction equipment. Exceptional Performance and Durability The ATEX Group II Battery is engineered to deliver outstanding performance. With a capacity of 2*3.5=7.0Ah, it offers a strong and consistent power supply, ensuring your equipment operates at peak efficiency. The battery boasts an impressive 11000 LUX and 240 Lumens, providing bright and clear illumination for a variety of tasks. Extended Runtime for Demanding Workdays One of the key features of this battery is its extended runtime. Capable of running for 13 hours on a single charge, it is perfectly suited for long shifts and continuous use. This extended runtime ensures that your equipment stays operational throughout your workday, minimizing interruptions and maximizing productivity. Compliance with ATEX Safety Standards Safety is paramount in industrial settings, and the ATEX Group II Battery adheres to the highest safety standards. It is specifically designed for use in potentially explosive atmospheres, meeting the rigorous requirements of ATEX Group II certification. This compliance ensures that the battery can be safely used in hazardous environments commonly found in mining and construction sites. Robust Construction for Industrial Use Constructed with durability in mind, the ATEX Group II Battery is built to withstand the tough conditions of industrial work environments. Its robust design ensures it can endure the rigors of daily use, providing reliable performance over time. Ideal for Mining and Construction Professionals Whether you are working in mining, construction, or any other industry where reliable power is crucial, the ATEX Group II Battery is an essential tool. Its combination of high performance, extended runtime, and compliance with safety standards makes it a top choice for professionals. Invest in Reliable Power with Provix Upgrade your equipment with the ATEX Group II Battery from Provix. Visit our website at www.provix.net to learn more about this high-quality battery and explore our wide range of specialized mining and construction equipment. Power your work with the best – choose Provix. View Details

Gas Metering Valve 2"

The 2″ Gas Metering Valve is designed to precisely control the flow of gas fuel in aero-derivative gas turbines, including the LM2500. By adjusting fuel delivery based on operating conditions, it maintains the optimal fuel-to-air ratio essential for safe, efficient, and reliable turbine operation.

Fuel metering valves act as the throttle control for gas turbines. Since turbines generate power by burning fuel mixed with compressed air, accurate regulation of this mixture directly impacts power output, efficiency, and emissions such as nitrogen oxides (NOx) and carbon monoxide (CO).

This valve delivers exceptional accuracy within ±1% of the flow point, ensuring consistent fuel delivery and optimal combustion. It is built to perform reliably in demanding environments and meets safety standards including ATEX, PED, and UL, certifying it for use in hazardous and extreme conditions.

The fuel metering valve is a two-inch right-angle style valve commonly used on aero-derivative turbines. It integrates easily into existing systems without requiring hydraulic or electrical changes. With millions of hours of proven field performance, it offers dependable, precise fuel control that enhances turbine efficiency and reduces fuel consumption.

View Details

Gas Lift Kickover Tools

Maximize Downhole Efficiency with HOCA Oil Tools' Advanced Kickover Tools In the highly specialized realm of oil and gas production, achieving operational precision and efficiency is critical. HOCA Oil Tools responds to this need with our superior line of Kickover Tools, specifically designed to enhance gas lift operations and optimize production rates. Our Kickover Tools are engineered to facilitate the precise installation and retrieval of side pocket mandrels and other downhole control devices, ensuring seamless well performance and maximizing production. HOCA's Kickover Tools: Engineered for Excellence HOCA Oil Tools' Kickover Tools are the epitome of innovation in downhole technology. Designed for compatibility with a range of wellbore sizes and specifications, our tools are crafted to offer unmatched precision, durability, and ease of use. Whether you are installing new equipment or retrieving existing devices, our Kickover Tools provide the reliability and efficiency needed for successful downhole operations. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ Kickover Tools means opting for a brand synonymous with quality, innovation, and reliability. Our commitment to excellence ensures that our products meet the high standards demanded by the oil and gas industry, providing our clients with the tools they need to succeed in their downhole operations. By integrating our Kickover Tools into your operational toolkit, you gain not just superior downhole equipment but also a strategic advantage in your production operations. With HOCA Oil Tools, you partner with a company dedicated to supporting your success with cutting-edge solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Kickover Tools to enhance their operational efficiency and well performance. Partner with us, and harness the power of advanced downhole solutions designed for success. With HOCA Oil Tools, elevate your downhole operations with Kickover Tools that set new standards for reliability, efficiency, and accuracy in the oil and gas industry. View Details

NE Safety Valve, Surface Controlled 4-1/2 inch

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog. View Details

7" Mech-1 Single Grip Mechanical Set Packer for 20-26 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Storm Choke 4 inch K

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Wind Turbine Charger

Rutland 1200 Turbine Features Unique Tri-Namic Aerofoil Blades The refined aerofoil blade profile is purpose designed for quietness, low windspeed start up and high wind peak aerodynamic performance. Each injection moulded blade is identical and perfectly balanced for smooth operation. Unrivalled power generation of 250W at 10m/s (23mph/37kmph) and peak power of 483W @ 15m/s. Our efficient, finely profiled Tri-namic blades ensure that the Rutland 1200 converts the maximum energy available in the wind to charge your batteries. Elegant and Aerodynamically Styled The sculpted nose and nacelle efficiently direct the flow of air leading to the built-in tail fin which directs the rotor to the prevailing wind. Our Build Quality The Rutland 1200 Turbine sets the standard for micro wind turbines in both performance and reliability. At our manufacturing facility in Corby, UK we use high grade materials to create a robust, high quality and long lasting turbine. Distinctive blue hard anodized marine grade aluminium, modern and lightweight UV stable injection mouldings and stainless steel components and fasteners perform in temperatures experienced from the Arctic to the equator. Available in 12V 24V & 48V versions. Generator The Rutland 1200T generator is based on Marlec’s pioneering disk type design. Its low resistance AC operation combines the latest powerful rare earth type magnets with a 3-phase winding and low friction bearings. This is housed in a protective aluminium casing and all manufactured by Marlec in the UK. *features from manufacturers literature View Details

SEM SDR Rust Remover

Introducing SEM SDR Rust Remover, the revolutionary rust removal technology that is changing the game in the steel industry. Developed from proven nuclear industry and engineering pre-commission operations, this water-based, safe and non-toxic product is flexible and effective on all grades of steel. SEM SDR Rust Remover is unlike any other rust removal product on the market. With a neutral pH and non-corrosive properties, it is safe for use on all steels, metals and engineering polymers. When used as directed, SEM SDR effectively removes all rust to leave behind a super clean, virgin metal surface. What sets SEM SDR apart is its ability to impart a degree of corrosion resistance to the treated surface. This helps to prevent flash rusting after cleaning, providing long-lasting protection for your valuable assets. To ensure the best results, it is recommended to degrease the metal surface before treatment with SEM SDR. This can easily be achieved with a surfactant or wash. Don't settle for less when it comes to rust removal. Choose SEM SDR Rust Remover and experience the power of advanced technology and superior results. View Details

HDI 2021 Pressure Transmitter System

The HDI 2021 Pressure Transmitter System is an electronic device designed to measure pressure accurately and convert it into a standardized 4–20 mA electrical signal for monitoring and control. It consists of a strain gauge sensor embedded in a stainless-steel housing and a transmitter assembly that processes the sensor signal. This system is widely used in oil and gas operations to provide precise, real-time pressure data essential for safe and efficient wellhead monitoring, pump and compressor control, manifold pressure tracking, and other critical process points.

In typical oilfield applications, the transmitter measures pressure at locations such as wellheads, flowlines, separators, and pumps to ensure that equipment operates within safe pressure limits, preventing failures and optimizing production. The 4–20 mA output enables easy integration with control systems, remote displays, data loggers, and automated safety shutdowns, supporting operational decisions and regulatory compliance.

The 2021 system supports pressure ranges from 5,000 psi to 20,000 psi, with overpressure protection allowing up to 30% above rated pressure for lower ranges, and 10% for higher ranges. It offers multiple housing options including hammer unions and various flanged connections to fit existing infrastructure. The sensor uses a high-quality strain gauge design with a robust stainless-steel case to ensure durability in harsh field conditions. A shielded instrument cable (up to 200 feet recommended) connects the sensor to the transmitter, minimizing electrical noise for reliable data transmission. The system is field repairable and designed with no moving parts or fluids, reducing maintenance needs and enhancing reliability.

The 2021 Pressure Transmitter System delivers accurate, dependable pressure measurement critical for monitoring and controlling high-pressure equipment in oil and gas operations, helping to maintain safety, protect assets, and improve production efficiency.

View Details

Warehouse Dolly

Are you tired of searching for the perfect ESP stand for the inspection and maintenance of your electric submersible pumps? Look no further than Sivam! We specialize in providing high-quality ESP stands that are specifically designed to meet the needs of your team. Our ESP stands are built using only the highest quality materials, ensuring exceptional durability and reliability. At Sivam, we understand the importance of precision and accuracy in the maintenance of critical equipment like ESP's, which is why our stands are designed to provide a stable and secure platform for teardown and inspection. We know that convenience and ease of use are important factors when it comes to selecting an ESP stand, which is why we offer adjustable height options to ensure a level working surface. Our stands are also equipped with a range of additional features to help your team work more efficiently, so you can get the job done quickly and effectively. At Sivam, we pride ourselves on providing exceptional customer service. We work closely with our clients to understand their specific needs and design benches that meet their exact specifications. Our commitment to quality and customer satisfaction is unmatched, so you can trust us to deliver the best products and services for your business. Choose Sivam for all your ESP stand needs and take your operations to the next level. Contact us today to learn more about our products and services and see how we can help you get the job done right! View Details

7 5/8" HP-6 Hydraulic Set High Angle Production Packer for 24-29.7 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Circulating Type Blanking Plugs for Nipples

HOCA Oil Tools: Enhancing Well Integrity with Circulating Type Blanking Plugs for Nipples In the intricate world of oil and gas extraction, maintaining well integrity while ensuring operational efficiency is paramount. HOCA Oil Tools, a leader in providing innovative downhole slick line tools, introduces its Circulating Type Blanking Plugs for Nipples, designed to meet and exceed these essential industry requirements. Tailored for seamless integration with landing nipples in wellbores, our products stand as a testament to our commitment to quality, efficiency, and safety in downhole operations. HOCA's Circulating Type Blanking Plugs for Nipples: Engineered for Superior Performance Our Circulating Type Blanking Plugs are meticulously designed to offer robust sealing and pressure control capabilities within the wellbore. These tools are essential for operators looking to manage fluid movement, conduct pressure tests, and maintain well integrity during various stages of well operations. Constructed from high-grade materials and engineered to meet the rigors of the downhole environment, our blanking plugs ensure reliability, durability, and performance. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Circulating Type Blanking Plugs for Nipples means selecting a solution that embodies innovation, operational excellence, and reliability. Our commitment to delivering high-quality downhole solutions ensures that our products not only meet but surpass the challenges faced in modern oilfield environments. By incorporating our Circulating Type Blanking Plugs into your downhole operations, you take a step towards enhanced well integrity, safety, and operational efficiency. With HOCA Oil Tools, you gain not just a supplier but a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Circulating Type Blanking Plugs for Nipples. Partner with us, and elevate your downhole operations to new levels of success and efficiency. With HOCA Oil Tools, enhance your downhole activities with tools that set new industry standards for reliability, safety, and performance in the competitive world of oil and gas extraction. View Details

7" HP-5 Hydraulic Set Production Packer 32-35 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Wifi Setup

Revolutionizing Wireless Connectivity in the Oil and Gas Industry with Nulux Network Solutions In an era where instant and reliable connectivity is paramount, especially in the meticulous domain of the oil and gas industry, seamlessly integrated wireless networks are not a luxury but a necessity. Navigating through the intricate operational matrices and colossal data, Nulux Network Solutions proffers unparalleled WiFi setup services, ensuring your wireless connectivity is robust, reliable, and resilient. Nulux: A Vanguard in Wireless Solutions Through our profound expertise in devising wireless systems and infrastructure, Nulux has become synonymous with impeccable wireless communication links. Whether it’s through point-to-point or multipoint radio networks, tower construction/rigging, or mesh networks, our dedicated team ensures that geographical and physical impediments become inconsequential in your communication and data transmission endeavors. Wi-Fi Access Points: A Linchpin of Operational Efficacy Navigating through bustling work environments in the oil and gas sector necessitates the deployment of wireless networks that are not only widespread but also impeccable in terms of performance and reliability. With Nulux’s unparalleled experience in the design and deployment of wireless networks, seamless connectivity transcends your office and permeates every corner of your operation - whether it be the warehouse, facility floor, or field sites. Deciphering Point to Point and Multipoint Configurations In the context of wireless networking: Point to Point (P2P) networks furnish a direct linkage between two nodes, ensuring streamlined communication and data transmission between them. This configuration, touted for its enhanced security, due to the dedicated nature of the connection, and increased productivity, ensures your data travels securely and uninhibited from one point to another. Multipoint configurations, on the other hand, establish a connection amongst more than two points, with a single line shared amongst multiple nodes. This configuration can be particularly beneficial in scenarios that demand centralized data access across various points. The Nulux Promise: Connectivity Beyond Boundaries Tethering on our commitment to ensuring your operations are perpetually connected and data transmissions are ceaselessly secure and reliable, our WiFi setup services promise: Ubiquitous Connectivity: Ensuring every node, regardless of its geographical positioning, is perpetually connected. Robust Security: Safeguarding your data transmissions against potential cyber threats and ensuring they traverse through a secure network. Operational Efficiency: Through our WiFi setups, we ensure your operational matrix, be it documentation review, QA-QC, or project planning, is continually enhanced and refined. Cost-Effective Solutions: Ensuring your wireless network, whether it be a point to point or multipoint configuration, is not only operationally beneficial but also financially viable. In the intricate and operationally critical realm of the oil and gas industry, ensuring your wireless connectivity is not only robust but also reliable and secure, is paramount. With Nulux Network Solutions, you’re not merely adopting a WiFi setup; you’re embedding a network that promises operational excellence, secure data transmissions, and an enhanced operational matrix. Connect with Nulux today and ensure your operations are always connected, your data transmissions always secure, and your wireless network is always reliable. View Details

5 1/2" Mech-1 Single Grip Mechanical Set Packer for 20-23 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

HP-3 Hydraulic Set High Angle 6 5/8" 20-24 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Pipe Fittings Hex Reducing Couplings – Female NPT – 1/4", 3/8", 1/2", 3/4", 1" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Hex Reducing Couplings Female NPT are precision pipe fittings designed to connect two pipes of different sizes while maintaining a secure, leak-tight connection. The female NPT threads provide a tapered seal that ensures a tight fit when connected to a male NPT thread, making them suitable for high-pressure systems up to 10,000 PSI. The hex shape of the coupling allows for easy tightening with standard tools, providing both convenience and reliability during installation.

Reducing couplings are specifically used when there is a need to transition between different pipe sizes in a system, allowing for flexibility in design and modification of existing pipelines. They help maintain proper flow rates, pressure, and system integrity without the need for custom fittings. This makes them essential in oil and gas systems where varying pipe sizes are common.

These couplings are manufactured from high-quality materials and are compliant with recognized standards, including ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228, ensuring consistency, traceability, and durability in demanding applications. Hex Reducing Couplings Female NPT are ideal for situations where space is limited and a reliable connection between different pipe sizes is required, supporting both operational safety and system efficiency.

View Details

7" HP-6 Hydraulic Set High Angle Production Packer for 32-35 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

LANAI Remote Operated Vehicle

Lanai ROV - The Ultimate All-In-One Solution for Subsea Operations Everything You Need - Ready to Dive Right In Imagine having all the tools you need at your fingertips, without the hassle of assembling and configuring complex systems. Introducing the Lanai ROV, the epitome of simplicity and efficiency. Designed by ROV operators for operations, the Lanai ROV is here to revolutionize your subsea exploration. Simplicity Meets Capability We understand that time is of the essence in the underwater world. The Lanai ROV comes fully assembled and ready to run straight out of the case, saving you valuable setup time. With a fully integrated console, tether reel, and factory-tested system, you can dive into your work without the need for a laptop. Engineered for Excellence Drawing upon decades of ROV operation experience and leveraging modern manufacturing techniques, we've created a remotely operated vehicle that sets new standards for capability and affordability. The Lanai ROV offers an unparalleled combination of features that will empower your missions. Pack More, Explore More The Lanai ROV's deck space and buoyancy cutouts offer ample room for a variety of payloads, including imaging sonar, scanning sonar, USBL, altimeter, CTD, UT, and Reach Alpha 5F manipulator. You won't need a tooling skid or extra buoyancy, maximizing your operational flexibility. Versatility at Your Fingertips Standard options such as the 125m tether/reel, console, and controller are just the beginning. With the Lanai ROV, you have the freedom to customize your setup with additional choices like the Newton grabber, waterproof transport cases, spare parts/tools, and more. Rest assured with our 2-year warranty - because your peace of mind is our priority. Unlock the Potential of Sonar Exploration With the Lanai ROV, discovering the underwater world has never been more accessible. The Sliding Aluminum Brackets are designed to securely hold a Cerulean Sonar ROVL (USBL), Blue Robotics Ping360 Sonar, DiveNET GPS (LBL), and many other sonars and beacons. Raise and lower the brackets effortlessly with an Allen Key to protect your valuable equipment from potential obstacles. The Power Behind the Performance Unleash the potential of the Lanai ROV with its impressive specifications: • Depth Rating: Dive confidently to 400m, exploring new depths and territories. • Compact and Lightweight: At just 13.0kg in air and dimensions of 559x356x305mm (LWH), the Lanai ROV is highly maneuverable and portable. • Payload Capacity: With a capacity of 2.1kg in freshwater, you can equip your Lanai ROV with a range of essential sensors and tools. • State-of-the-Art Thrusters: Experience precision movements with 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters. • Superior Imaging: Capture the underwater beauty with a 1080 HD IP camera with tilt and four 1,500 Lumen lights for optimal visibility. The Console - Your Command Center Control your exploration effortlessly with the Mini Integrated Console. Boasting a 12in HD monitor (1,200NIT) and fully isolated output with GFCI, it houses an Intel PC with pre-configured software for seamless operations. Unleash the Exploration with Lanai ROV Take charge of your underwater missions with the Lanai ROV. Simplify your operations, maximize your payload options, and explore with confidence. Contact us today to embark on your journey with the Lanai ROV - The Power of Simplicity, Unleashed. View Details

LM2500 Fixture, Hinge for Upper Compressor Case

LM2500 Fixture, Hinge – Upper Compressor Case is a specialized tool set designed to safely raise and hinge open the upper compressor case of the LM2500 gas turbine engine. This fixture is essential during major maintenance, inspection, or overhaul activities where access to the engine’s internal compressor components is required.

The fixture allows maintenance teams to lift and securely hold the heavy upper compressor case in a hinged, open position. This provides stable and safe access to the compressor rotor and other internal parts, ensuring technicians can carry out detailed inspections or repairs without risking damage to sensitive components.

Made from strong, durable materials, the fixture set is built to support the heavy upper compressor case while keeping everything properly aligned. Its reliable locking and hinge system holds the case securely in place, helping protect the gas turbine.

Compatible with both OEM and MRO procedures, this fixture supports efficient, repeatable maintenance practices and helps reduce overall engine downtime. Whether used in the field or in a dedicated maintenance facility, the LM2500 Hinge Fixture is a critical tool for safe and effective servicing of the LM2500 engine’s compressor section.

View Details

Needle Valves Integral Bonnet Series – Male x Female – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Integral Bonnet Series – Male x Female is designed for reliable and precise flow control in industrial applications, particularly in oil and gas. Its integral bonnet construction means the body and bonnet are a single piece, eliminating welds and enhancing overall strength, safety, and durability. This design ensures consistent performance under high-pressure conditions and reduces the risk of leakage or mechanical failure.

The Male x Female configuration allows for straightforward installation into piping systems, with the male end threading securely into a female port. This connection type is widely used in process lines, instrumentation, and control systems where accurate flow adjustment, isolation, or sampling is required.

These valves feature a removable T-handle for easy actuation with low torque, rolled stem threads for smooth operation and long service life, and fully supported packing to minimize maintenance. A self-centering, non-rotating stem tip ensures bubble-tight shutoff, while the mirror-finished stem reduces wear on packing and facilitates smooth operation. Optional stellite-tipped stems are available for applications involving abrasive or corrosive fluids, further extending the valve’s lifespan.

This series is ideal for applications requiring precise flow control, reliable sealing, and long-term durability in harsh environments such as high-pressure oil and gas systems, chemical process lines, and instrumentation panels.

View Details

Forklifts for material handling in the warehouse or on the job site

Forklifts are one of the most useful and powerful vehicles on any job site. They are used to handle materials, carry heavy loads, as well as load and unload goods from delivery vehicles and safely secure goods in hard to reach areas. When it comes to different types of forklifts, there are as many options to choose from as there are uses for them. A warehouse forklift is excellent for loading and unloading delivery vehicles and can be used to carry inventory, lift pallets and move goods over short distances. They can generally carry the weight of one to five tons and work best in indoor locations. View Details

Wireline Spear – Downhole Fishing Tool – 1. 1/2”, 1 3/4", 2 1/4”, 2 3/4", 3 1/2” – ISO 9001:2015

The Wireline Spear is a downhole tool used in oil and gas wells to retrieve lost, broken, or compacted wireline that cannot be engaged with a standard two-prong wireline grab. It is designed for fishing operations where the wireline has become badly balled up or tightly compacted, situations where conventional pronged grabs are ineffective.

The tool is deployed on a wireline and guided down the wellbore under its own weight. Its central mandrel is surrounded by upward-pointing barbs or slips that penetrate and anchor into the wireline. When engaged, these barbs provide a secure grip on the wire, allowing the tool and wire to be retrieved to the surface.

The Wireline Spear is designed for maximum penetration into tightly balled or compacted wire. Its barbs ensure engagement even when the wire is severely entangled. Because the Wireline Spear is effectively non-releasable, it is typically run with a disconnect arrangement above the tool. This allows the assembly to be released if the wire cannot be recovered fully, preventing the tool from becoming stuck in the wellbore.

The tool is available in sizes from 1.5” to 3.5”, with a maximum outside diameter of 1.500” to 3.500” and a fishing neck O.D. of 1.375” to 2.312”. It connects to the wireline through a top connection ranging from 15/16 – 10 UN to 1-1/16 – 10 UN and can retrieve wire diameters from 0.50” to 3.50”.

The Wireline Spear is constructed from steel to withstand downhole mechanical stresses and pressures. Its design includes a central mandrel with upward-pointing barbs that secure tightly compacted or balled-up wireline. The tool’s compact dimensions and engagement mechanism allow it to retrieve wireline that cannot be captured by standard pronged grabs, and it is generally run with a disconnect arrangement above the tool to allow release if the wire cannot be recovered.

View Details

Landing Nipple

Optimize Your Oilfield Operations with HOCA Oil Tools' Premium Landing Nipples In the demanding world of oilfield exploration and production, precision and reliability in downhole tools are paramount for operational success. HOCA Oil Tools leads the industry with its innovative lineup of Landing Nipples, designed to ensure seamless integration and operation within the wellbore. Tailored for various applications and environments, our Landing Nipples are key components in facilitating efficient downhole operations, setting new standards for performance and safety. HOCA's Landing Nipples: Engineered for Excellence in Downhole Operations Our Landing Nipples, available in a variety of types including 'BF', 'BR', 'ROTX', 'ROTXN', 'ROTR', and 'ROTRN', are designed to cater to diverse operational needs, from standard to heavy-duty applications. Each model is engineered with the highest quality materials to provide a secure and reliable seating point for wireline flow control devices, optimizing well performance and enhancing downhole safety. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities and challenges of downhole operations. Our Landing Nipples are a testament to our commitment to providing innovative solutions that enhance efficiency, safety, and reliability. By choosing our products, you are not just selecting tools; you are partnering with a leader in downhole technology dedicated to your operational success. Integrating HOCA’s Landing Nipples into your downhole operations signifies a step towards enhanced operational performance, safety, and cost-efficiency. With a focus on innovation, quality, and customer service, HOCA Oil Tools is your partner for advanced downhole solutions. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your oilfield operations. Partner with us to experience the unparalleled performance, reliability, and support that come with our premium Landing Nipples. Elevate your downhole operations with HOCA Oil Tools – where technology, innovation, and expertise converge to drive success in the oil and gas industry. View Details

5 Valve Manifolds Valve Manifold T Type – Pipe to Flange – 6000 PSI

The 5 Valve Manifold T Type, Pipe to Flange is engineered to connect impulse lines to differential pressure transmitters in industrial and oil and gas applications. It features 1/2” Female NPT Pipe to Flange connections set at 54mm (2-1/8”) centers, with a configuration consisting of two block valves, two equalizer valves, and one bleed valve. This design allows for efficient isolation, calibration, and maintenance of transmitters while maintaining process integrity.

The T Type configuration is especially useful because it provides a compact and organized valve layout that simplifies operations like bleeding and equalizing, reducing the risk of leaks and measurement errors. Using a 5 valve manifold ensures maximum operational flexibility, allowing operators to isolate the instrument, balance pressure, and vent safely without interrupting the main process.

Pipe to Flange connections are chosen when connecting transmitters or instruments to existing flanged piping systems, offering strong mechanical support and compatibility with industry-standard flanges. This combination of T Type, 5 valves, and pipe-to-flange connections ensures accurate, reliable, and safe pressure measurement and calibration in critical oil and gas operations.

View Details

Tubing Mandrel Running Tool

NWB-30 Charger

Experience Rapid and Efficient Charging with the Wisdom NWB-30 Charger – Now Available at Provix Provix is proud to introduce the Wisdom NWB-30 Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This state-of-the-art charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Versatile Charging Options The NWB-30 Charger offers both AC and DC charging capabilities, providing flexibility in various environments. It supports AC input of AC 100-240 V ± 10%, 0.2 A, 50-60 Hz, and DC input of 7-30 V, 1.6 A. This versatility ensures that you can charge your equipment anywhere, whether on-site or in the office. Optimized for Wisdom Lamp3A This charger is specially designed for the Wisdom Lamp3A, offering a fast charging time of approximately 5 hours. Its compatibility with this lamp model ensures that your lighting equipment is quickly ready for use, reducing downtime and enhancing productivity. High-Efficiency Charging With a maximum DC output voltage of 4.80 V ± 0.05 V and a DC output current of 2000 mA ± 100 mA, the NWB-30 Charger delivers efficient and rapid charging. This ensures your equipment is charged in the shortest possible time, keeping you ready for any task. Compact and Lightweight Design Measuring 114 x 79 x 35 mm (4.5 x 3.1 x 1.4 in) and weighing only 170 g (6.00 oz), the NWB-30 is compact and portable. Its lightweight design makes it easy to carry and store, ideal for professionals on the move. Reliable and Durable Built to withstand the rigors of mining environments, the NWB-30 Charger is both reliable and durable. Its robust construction ensures long-term performance, making it a valuable investment for any mining professional. Enhance Your Charging Experience The Wisdom NWB-30 Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit our website at www.provix.net. Stay powered and productive with the Wisdom NWB-30. View Details

HP-3 Hydraulic Set High Angle 5 1/2" 20-23 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

4-1/2 inch SP SCSSSV Tubing Retrievable

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 20-23 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type