Ballycatter.ca - Industrial Equipment

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

HDI 2200 Choke Position Indicator System

The HDI 2200 Choke Position Indicator System is a battery-powered, intrinsically safe solid-state electronic gauge designed to monitor choke valve positions in oil and gas operations with high accuracy. It displays choke position in 1% increments from fully closed to fully open (0% to 100%) using a three-digit numeric readout alongside an analog bar graph segmented into 101 divisions for both precise measurement and quick visual trend analysis.

The system interfaces with linear, rotary, or retractable potentiometers housed in stainless steel enclosures. This flexibility allows for straightforward adaptation across many choke configurations without the need for onsite customization. The sealed stainless steel housing and solid-state electronics enable the 2200 to operate reliably in harsh field conditions, including high vibration environments typical in land and offshore drilling.

Its compact display unit measures approximately 8 by 8 by 4 inches and weighs around 5 pounds. The system is powered by an intrinsically safe 3.6V DC battery pack, with a low battery indicator to ensure timely maintenance and uninterrupted operation. Field-repairable components minimize downtime and allow for easy servicing. The system supports dual sensors for integration with human-machine interfaces (HMI) or programmable logic controllers (PLC), enabling remote monitoring and automation. The 2200 system replaces traditional pneumatic indicators, eliminating the need for air lines and reducing maintenance complexity, while offering a simple calibration interface to facilitate setup and ongoing adjustments.

View Details

Software Audit

ELEKS Software Audit Services: Uncover Excellence in Every Line of Code In the dynamic landscape of software development, ensuring your products and processes are performing at their peak is crucial. ELEKS Software Audit Services empowers you to navigate the challenges and seize the opportunities that lie within your software solutions. With an unbiased approach, we help you identify strengths and weaknesses, mitigate risks, and streamline your path to success. ELEKS Software Audit Services: Guiding Your Path to Excellence Identify Flaws in Your SDLC: Our unbiased evaluation scrutinizes your current products, internal processes, and documents to identify strengths, weaknesses, and potential risks within your Software Development Lifecycle (SDLC). With these insights, we pave the way for a fortified software solution that stands strong against challenges. Build the Ultimate Product: Rigorous QA testing subjects your product to industry-acknowledged standards including IEEE 829, ISO 29119, IEEE 730, and ISO 25010. Our unbiased framework maximizes efficiency and detects bottlenecks before launch, equipping your product with the robustness it needs to thrive. Speed to Market: Our meticulous software audit identifies bottlenecks and snags within your software, development, and testing processes. This optimization not only saves valuable time but also preserves your revenue streams, driving your product faster to market. Elevate Project Artifacts: Project documentation and software outputs undergo rigorous evaluation, enhancing business maturity and elevating your overall development process. With our insights, your software journey becomes a path towards continual improvement. Craft a Solid Action Plan: Through stringent diagnostics, we pinpoint issues in your project maturity and business analysis processes. Our collaboration results in a well-defined software action plan, optimizing efficiency and shaping a brighter future. Build a Roadmap for Success: Post-evaluation, we collaborate closely to create a resilient framework for your software operations. We offer continued support, ensuring your path forward is clear and confident. Minimize Post-Release Issues: Validating end-to-end application performance, we detect software defects before your product goes live. Proactive identification and resolution of defects safeguard your product's performance and uphold your brand reputation. ELEKS Software Audit Services: A Five-Step Excellence Framework Discovery: • Plan and prepare • Identify business needs and goals Analysis: • Collect and analyze data • Conduct interview sessions • Verify findings • Present and discuss findings Presentation: • Present findings and recommendations Implementation: • Co-create an action plan • Implement audit recommendations Control: • Follow-up on the action plan Empower Your Software Solutions: Development Process Audit: Evaluate the stability of every facet of your process framework, from development and release to project management, QA, and BA processes. Software Audit: Our experts conduct comprehensive diagnostics to assess the strength of your software solution, covering architecture, database, code quality, security, UI/UX, and more. Post-Audit: Receive a summary report detailing discrepancies, their severity, associated risks, and recommendations. Collaborate with us to craft a detailed action plan for issue resolution. ELEKS Software Audit Services: Your Gateway to Excellence With ELEKS Software Audit Services, your software solutions are fortified, risks are mitigated, and excellence is uncovered. Let us guide you through the labyrinth of software development, ensuring every line of code is a testament to your success. Elevate your software solutions with ELEKS, where excellence is not just a goal, but a guarantee. View Details

Halliburton SP 7 inch TR-SCSSSV

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

Water Injection Safety Valve 4.25 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Liftboat for water depths up to 150'

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Video Conferencing Leasing

Running Tools for Gas Lift

Revolutionize Your Well Performance with HOCA Oil Tools' Running Tools for Gas Lift In the technologically driven world of oil and gas extraction, efficiency and innovation are paramount to success. HOCA Oil Tools, a leading provider of downhole slick line tools, is at the forefront of this evolution with its state-of-the-art Running Tools for Gas Lift operations. These tools are specifically designed to enhance the installation and performance of gas lift systems, which are crucial for optimizing production in oil and gas wells. HOCA's Running Tools for Gas Lift: Elevating Production Standards HOCA Oil Tools' Running Tools for Gas Lift are engineered for precision and durability, providing the perfect solution for the deployment of gas lift valves and mandrels. These tools are essential for maintaining continuous and efficient gas lift operations, ensuring that production is maximized and well integrity is preserved. Constructed with high-grade materials and designed to meet the rigorous demands of the downhole environment, our Running Tools for Gas Lift are your key to unlocking enhanced well performance. Experience the HOCA Difference in Gas Lift Operations At HOCA Oil Tools, we understand the challenges faced by the oil and gas industry and are committed to providing solutions that drive success. Our Running Tools for Gas Lift are a testament to this commitment, offering unparalleled performance, reliability, and safety. Incorporating our Running Tools into your gas lift operations signifies a step toward enhanced productivity and operational excellence. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to your success, offering innovative solutions and expert support tailored to your unique challenges. Choose HOCA Oil Tools' Running Tools for your Gas Lift needs and transform the efficiency and safety of your downhole operations. Partner with us, and take the first step towards maximizing your well's productivity and profitability. With HOCA Oil Tools, elevate your gas lift operations to new heights, where cutting-edge technology meets unparalleled performance and reliability. View Details

QUP Retrievable Bridge Plug

Looking for a reliable and high-quality retrievable bridge plug for your completion needs? Look no further than ID OilTools' QUP Plug System! Our QUP Plug System is specifically designed to provide pressure control or tubing anchoring in completions where nipple profiles are either damaged or not available. This means that our plug can be used in a variety of applications, including wellbore isolation, straddle systems, instrumentation suspension, artificial lift systems, orifice downhole chokes, downhole check valves, and pump open subs. The QUP plug can be easily conveyed to depth on standard electric line setting tools or on hydraulic setting tools for use with coiled tubing. Retrieval of the plug is just as easy, using a standard GS-pulling tool and standard retrieval procedures. Plus, our patented releasing mechanism makes it easy to fit a variety of equalizing or pump through-subs on the bottom of the plug. But the benefits of our QUP Plug System don't stop there! Our plug system boasts a number of additional features and capabilities, including a slip-lock design, equalizing assembly options, and elements built to NACE MR0175 specifications. Plus, our proprietary HSN and Fluoroelastomer elements ensure that our plug system can withstand even the harshest conditions, with a maximized thru bore for maximum production. So if you're in need of a reliable, high-quality retrievable bridge plug, look no further than ID OilTools' QUP Plug System. Contact us today to learn more! View Details

D6 Bulldozer

POWER TRAIN Fully-automatic 4-speed transmission Cat C9.3B diesel engine Double reduction planetary final drives Hydraulic reversing fan OPERATOR ENVIRONMENT Fully redesigned cab, sound suppressed, with Integrated Roll Over Protective Structure (ROPS) Full-color 10-inch (254 mm) liquid crystal touch screen display Integrated rearview camera Adjustable operator controls/armrests Cab mounted modular Heating/Ventilation/Air Conditioning (HVAC) system Added storage areas Electrohydraulic implement and steering controls Cloth seat Lights - 6 LED CAT TECHNOLOGY Slope Indicate Product Link, Cellular Grade Control Ready Cab Remote Control Ready Remote Flash/Remote Troubleshoot Operator ID Machine Security - Passcode Compatibility with radios and base stations from Trimble, Topcon, and Leica Capability to install 3D grade systems from Trimble, Topcon, and Leica UNDERCARRIAGE Redesigned track roller frame SERVICE AND MAINTENANCE Rear access ladder Shovel holder Ground level service center 30-minute cab removal Fire extinguisher mounting provision Ecology drains Underhood work light HYDRAULICS Independent steering and implement pumps Load sensing hydraulics ATTACHMENTS Ripper-ready rear hydraulics View Details

Tubing Hanger Coupling - 4 ½” to 2 3/8”

The 4 ½” x 2 3/8” tubing hanger coupling is a specialized downhole component designed to connect two different sizes of upset tubing within a wellhead assembly. Upset tubing refers to tubing that has thicker, reinforced sections at the ends—called “upsets”—which strengthen the threaded connections and help withstand the mechanical stresses and high pressures encountered during well operations. This coupling provides a secure and pressure-tight transition between a larger 4 ½-inch tubing hanger and a smaller 2 3/8-inch production tubing string, enabling effective management of wellbore fluids and maintaining pressure containment.

Engineered to integrate seamlessly with tubing hanger spools, wrap-around tubing hangers (PTHSW), and ‘PTHS’-type tubing spools, this coupling forms part of a modular wellhead completion system. Its union nut design allows installation by screwing the coupling in place without rotating the Christmas tree, simplifying assembly and reducing the risk of damage during installation.

Both the top and bottom ends of the coupling are threaded to customer specifications, offering flexibility for various well configurations and allowing the installation of back pressure valves to maintain well control during operations. Manufactured to API standards and constructed from high-grade materials, the coupling delivers durability and reliable performance in demanding downhole environments characterized by high pressure, temperature, and corrosive fluids.

By facilitating a smooth and strong size transition between different tubing strings, the 4 ½” x 2 3/8” tubing hanger coupling supports well integrity, operational efficiency, and safety throughout oil and gas production.

View Details

Aerial lifts Leasing

Milling machines Leasing

Advance Your Manufacturing Capabilities with Milling Machine Leasing from CWB National Leasing Transforming Your Production Processes with Flexible and Efficient Equipment Solutions In the manufacturing, metalworking, and engineering sectors, milling machines are indispensable for precise material shaping and fabrication. Leasing milling machines through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to enhance their production capabilities. Here’s how leasing milling machines can benefit your business: 1. Quick Access to Advanced Manufacturing Equipment CWB National Leasing understands the importance of maintaining an efficient production line. They offer a swift leasing process, typically providing decisions within 48 hours of application submission. This ensures that your milling machines can be delivered and operational quickly, minimizing downtime and enhancing your manufacturing efficiency. 2. Enhanced Financial Flexibility Leasing milling machines with CWB National Leasing boosts your buying power. It enables you to free up capital by opting for manageable periodic payments instead of a large upfront purchase. The option to add extra features or accessories to your milling machines for a small payment increase allows for customization to meet specific production requirements. 3. Effective Cash Flow Management Smaller lease payments over the term mean your milling machines start contributing to your business’s revenue while they're being paid off. This approach helps maintain a healthy balance between expenses and income, crucial for the financial stability and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing milling machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease milling machines through CWB National Leasing is a strategic decision that equips your business with essential manufacturing equipment while maintaining financial agility. It ensures access to high-quality milling machines, vital for precise and efficient production, without the financial strain. View Details

Cyber Security Services

ELEKS Cyber Security Services: Safeguarding Your Digital Future In today's digital landscape, security is not a luxury – it's a necessity. At ELEKS, we're your partners in fortifying your digital infrastructure against the evolving threats that lurk in the shadows. Our Cyber Security Services are your shield against cyber adversaries, helping you minimize damage, mitigate risks, and keep your business safe in the face of the ever-changing threat landscape. Empowering Your Digital Defense: Streamline Compliance Efforts: Navigating the complex world of industry standards and regulations is a daunting task. Our experts offer unbiased evaluations of your processes, products, and systems. By implementing security controls aligned with industry standards, you'll ensure business resilience and alleviate the compliance burden. Prioritize Attack Survivability: Prevention is the key to security success. Our services identify and rectify security issues before product launch, ensuring your products are secure by design and by default. Embedding security controls in the early stages of development safeguards against penalties, risks, and reputational damage. Assure Control Effectiveness: ELEKS' security services go beyond implementation – we verify control effectiveness in complex environments, intricate IT infrastructures, and mission-critical applications. With our expertise, maintain operations and deliver your core business vision without compromising security. Enhance Corporate Security Posture: Our structured process evaluates the risks associated with your operations, identifying vulnerabilities and assessing risks to develop essential steps for mitigation. We empower your business with a robust security strategy, enabling you to combat threats proactively. Craft a Resilient Security Strategy: At the heart of our approach lies a commitment to understanding the root causes of your risks. Our security team develops comprehensive remediation plans that drive long-term strategic improvements, prioritizing lasting solutions over short-term fixes. Unveiling the Power of ELEKS Security Services: Discover, Assess, and Enhance: 1. Discovery: Gain a clear understanding of your project's scope and resource requirements to maximize efficiency. 2. Assessment & Testing: Thoroughly evaluate processes, products, or systems to pinpoint gaps and non-conformities. 3. Analysis: Uncover threats, needs, and opportunities to drive innovative security solutions. 4. Reporting: Tailor a technological solution to address vulnerabilities, backed by a comprehensive action plan. 5. Implementation: Work collaboratively to implement new solutions, ensuring seamless integration and protection. 6. Managed Services: Receive ongoing support and recommendations to adapt to evolving threats and enhance efficiency. ELEKS Security Services: Strengthening Your Defenses: 1. Security Testing Services: Comprehensive testing services to uncover vulnerabilities, including penetration testing for web, mobile, desktop, and infrastructure. Adherence to recognized standards ensures comprehensive coverage. 2. Compliance Automation Platform: Empower regulated sectors to consolidate and automate compliance efforts, reducing costs and ensuring regulatory compliance across your entire value chain. Why Choose ELEKS' Cyber Security Services? 1. Expertise: With a team of certified experts, we offer decades of experience in building secure solutions. 2. Proactive Approach: Our strategies are designed to prevent breaches and protect you from emerging threats. 3. Compliance Mastery: Navigate industry regulations confidently with our compliance-focused services. 4. Holistic Solutions: From discovery to implementation, our comprehensive approach addresses your unique security needs. Elevate Your Security with ELEKS: In the digital battlefield, trust ELEKS to be your guardian against cyber threats. Our Cyber Security Services are not just about mitigating risks – they're about empowering your business to thrive securely. Join hands with ELEKS and safeguard your digital future. Your security is our priority – let's secure it together. View Details

Nitrogen Generator System

Introducing Sivam's Nitrogen Generator: The Ultimate Solution for Nitrogen Generation on the Go! This state-of-the-art unit utilizes PSA Column technology to generate gas phase nitrogen of specified quality levels at any field location. It's the perfect solution for industries that require a reliable source of nitrogen in remote locations, without the hassle of transporting and storing nitrogen cylinders. Sivam's Nitrogen Generator is designed with portability and convenience in mind. With its compact size and easy-to-use interface, it can be set up quickly and easily on any job site. Whether you're in the oil and gas industry, electronics manufacturing, food packaging, or any other industry that requires high-purity nitrogen, Sivam's Nitrogen Generator is the ideal choice. One of the key benefits of Sivam's Nitrogen Generator is its advanced PSA Column technology. This technology enables the unit to separate nitrogen from the air using a carbon molecular sieve, providing a reliable source of nitrogen gas at a specified purity level. This means you can be confident in the quality of the nitrogen you're generating, no matter where you are. In addition, Sivam's Nitrogen Generator is designed for efficiency and cost-effectiveness. With its low power consumption and minimal maintenance requirements, it's a cost-effective alternative to traditional nitrogen sources. And because it's a self-contained unit, there's no need to worry about transporting and storing nitrogen cylinders, saving you time and money. Overall, Sivam's Nitrogen Generator is the ultimate solution for nitrogen generation on the go. With its advanced technology, ease of use, and cost-effectiveness, it's the perfect choice for industries that require a reliable source of nitrogen gas, no matter where they are. Contact us today to learn more about Sivam's Nitrogen Generator and how it can benefit your business. View Details

Subsea Templates Fabricated and Installed

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

7" Mech-2 Double Grip Mechanical Set Packer for 17-20 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Fiber Optic Fusion Splicing

Harnessing the Power of Seamless Connectivity in the Oil and Gas Sector with Nulux’s Fiber Optic Fusion Splicing In the intricate and demanding environments of the oil and gas industry, ensuring seamless, reliable, and robust data transmission is paramount. Every segment of the extensive energy value chain, from exploration and extraction to transportation and refinement, hinges upon unfettered communication and data flow. Nulux Network Solutions, steadfast in its commitment to supporting customers towards a more sustainable future, proudly shines a spotlight on one of its sterling services: Fiber Optic Fusion Splicing. Demystifying Fusion Splicing Fusion splicing is not merely a technical process; it’s an art form where two pieces of fiber optic cables are meticulously joined together to craft a permanent bond. It is not merely about connecting two cables; it's about facilitating a continual, unbroken pathway for data, ensuring that your critical information traverses across your networks without hesitation or impedance. The resultant creation is a single, coherent piece of fiber, capable of being utilized in myriad applications, especially where the amalgamation of multiple fibers or cables is necessitated. Given the specialized nature and the precise equipment required to perform fusion splicing, it is indispensable to collaborate with a proficient service provider – a role where Nulux jubilantly finds its calling. Ensuring Unparalleled Data Transmission with Fusion Splicing Embarking upon fusion splicing is not merely opting for a connection; it's choosing the promise of the most reliable, consistent, and high-fidelity data transmission possible. This not only amplifies the effectiveness of your optical network but also significantly bolsters its durability, ensuring that your operations in the oil and gas sectors are perpetually connected and operational. Why Nulux Stands Unparalleled in Fiber Optic Fusion Splicing Our expertise transcends providing products and solutions; it’s a commitment to walk alongside our customers, guiding them on their journey towards not just operational efficiency but towards a future that leans into sustainability. At Nulux, we provide: Expertise Across the Energy Value Chain: From upstream to downstream, our services encapsulate the entirety of the energy value chain, ensuring that every node of your operation is seamlessly connected. Custom Solutions: We delve into understanding the unique operational landscape of your facilities, providing tailored fiber optic solutions that resonate with your specific requirements. Sustainable Future: Aligned with the global pivot towards sustainability, our solutions are crafted not just with an eye on operational efficiency but also with a commitment towards fostering a sustainable future. Infinite Possibilities with Uninterrupted Connectivity Engineering professionals in the oil and gas sector grapple with a multitude of challenges, and data transmission should not be one of them. Fiber Optic Fusion Splicing by Nulux is not merely a service; it's a pledge of uninterrupted connectivity, a guarantee of flawless data transmission, and a commitment to bolstering your operations with unparalleled connectivity solutions. In the realms of the digital evolution of the oil and gas sector, every bit of data is vital, and ensuring it reaches its destination without interruption is critical. Choose Nulux Network Solutions for your Fiber Optic Fusion Splicing, and let’s craft a future where your data flows as seamlessly as your operations. Your network. Our solutions. Nulux’s promise of a connected future. View Details

Slickline Swivel Joint

Unlocking Efficiency in Downhole Operations: HOCA Oil Tools B.V.'s Advanced Slickline Swivel Joints In the dynamic landscape of downhole operations, the role of slickline swivel joints becomes pivotal in ensuring seamless, efficient, and safe wireline operations. HOCA Oil Tools B.V., a renowned name in the oil and gas industry, stands at the forefront of delivering cutting-edge slickline solutions. Our array of slickline swivel joints is designed to meet and exceed the operational demands and challenges faced by our clients. Pioneering Slickline Swivel Joints: HOCA Oil Tools B.V. offers an extensive range of slickline swivel joints, including the Type ‘HO’ and ‘HD’ swivel joints, engineered to minimize wireline twisting during downhole operations. This not only enhances safety but also improves operational efficiency by reducing the risk of wireline entanglement and breakage. Key Benefits of Our Slickline Swivel Joints: Reduced Wireline Twisting: Our swivel joints significantly reduce the twisting of wireline, thus minimizing the risk of operational downtime and wire breakage. Enhanced Operational Safety: By preventing wireline kinks and twists, our swivel joints contribute to safer downhole operations, protecting both personnel and equipment. Increased Efficiency: Smooth wireline operations ensure quicker job completion and reduced non-productive time. Durability and Reliability: Made from high-grade materials, our swivel joints withstand harsh downhole conditions, ensuring long service life and reliability. Versatility: Available in various sizes and configurations, our swivel joints cater to a wide range of downhole requirements and wireline types. Ease of Integration: Designed for easy integration into existing tool strings, our swivel joints facilitate seamless operations without the need for extensive modifications. Main Features of HOCA's Slickline Swivel Joints: Type ‘HO’ Swivel Joint: Designed to minimize wireline twisting, available in sizes from 1” to 2 1/2", with threaded connections for easy installation. These swivel joints feature top sub, pin, ball connector, ball sub, and bottom sub components, ensuring robust performance and ease of maintenance. Type ‘HD’ Swivel Joint: Similar to the Type ‘HO’ but designed for even more demanding environments, with ‘QLS’ - ‘RQLD’ connections, providing additional strength and durability. These swivel joints are also available in sizes from 1 1/2” to 2 1/2", tailored for heavy-duty operations. At HOCA Oil Tools B.V., we understand the complexities of downhole operations. Our slickline swivel joints are a testament to our commitment to innovation, safety, and efficiency. Embrace the future of wireline operations with HOCA, where performance meets reliability. Contact us today to learn more about how our slickline solutions can optimize your operations. View Details

Coiled Tubing Straight Bar

Introducing the SBA Straight Bar from Marlin Oil Tools: The Essential Downhole Tool for Enhanced Well Intervention Precision Marlin Oil Tools proudly presents the SBA Straight Bar, a specially designed downhole tool that revolutionizes well intervention operations. As an integral part of the Bottom Hole Assembly (BHA), the SBA Straight Bar addresses the critical challenge of coil tubing deformation, ensuring a straighter and more effective pathway for well intervention tools. Key Features of the SBA Straight Bar: Enhanced BHA Stability: The SBA Straight Bar provides the necessary rigidity and straightness to the BHA, minimizing the risk of deformation and ensuring smoother operations. Improved Wellbore Navigation: By maintaining a straighter path, the SBA Straight Bar significantly reduces the chances of the BHA resting against the well walls or encountering obstacles during transitions. Optimal Centering: Its rigid and straight design aids in better centering of the BHA within the wellbore, crucial for the precision of well intervention tasks. Seamless Passage: The SBA Straight Bar facilitates seamless passage through wellbore expansions and recessions, including critical points like blowout preventers, enhancing operational safety and efficiency. Versatile Integration: Designed for easy integration into any BHA configuration, the SBA Straight Bar is suitable for a wide range of well intervention activities, offering unparalleled adaptability. Elevate your well intervention strategies with the SBA Straight Bar from Marlin Oil Tools, a leading-edge solution designed to combat coil tubing deformation and ensure precise downhole operations in the oil and gas industry. The SBA Straight Bar enhances BHA stability, improves wellbore navigation, and ensures optimal centering and seamless passage through wellbore transitions. This tool is an indispensable addition to your BHA, providing the rigidity and straightness necessary for effective well intervention. Choose the SBA Straight Bar for a reliable, efficient, and versatile solution to well intervention challenges. Why Choose the SBA Straight Bar from Marlin Oil Tools? Superior Operational Precision: Ensures straighter coil tubing pathways for enhanced precision in well intervention tasks. Increased Operational Safety: Minimizes the risk of BHA hang-ups and obstructions, ensuring safer operations. Adaptability to Well Conditions: Capable of navigating through complex well architectures, including areas of expansion and recession. Streamlined Well Intervention: Promotes smoother, faster, and more efficient well intervention procedures. The SBA Straight Bar by Marlin Oil Tools represents the forefront of downhole tool technology, providing operators with the means to enhance well intervention accuracy and operational success. Incorporate the SBA Straight Bar into your well intervention toolkit to achieve superior performance and outcomes. View Details

HDI 2021 Pressure Transmitter System

The HDI 2021 Pressure Transmitter System is an electronic device designed to measure pressure accurately and convert it into a standardized 4–20 mA electrical signal for monitoring and control. It consists of a strain gauge sensor embedded in a stainless-steel housing and a transmitter assembly that processes the sensor signal. This system is widely used in oil and gas operations to provide precise, real-time pressure data essential for safe and efficient wellhead monitoring, pump and compressor control, manifold pressure tracking, and other critical process points.

In typical oilfield applications, the transmitter measures pressure at locations such as wellheads, flowlines, separators, and pumps to ensure that equipment operates within safe pressure limits, preventing failures and optimizing production. The 4–20 mA output enables easy integration with control systems, remote displays, data loggers, and automated safety shutdowns, supporting operational decisions and regulatory compliance.

The 2021 system supports pressure ranges from 5,000 psi to 20,000 psi, with overpressure protection allowing up to 30% above rated pressure for lower ranges, and 10% for higher ranges. It offers multiple housing options including hammer unions and various flanged connections to fit existing infrastructure. The sensor uses a high-quality strain gauge design with a robust stainless-steel case to ensure durability in harsh field conditions. A shielded instrument cable (up to 200 feet recommended) connects the sensor to the transmitter, minimizing electrical noise for reliable data transmission. The system is field repairable and designed with no moving parts or fluids, reducing maintenance needs and enhancing reliability.

The 2021 Pressure Transmitter System delivers accurate, dependable pressure measurement critical for monitoring and controlling high-pressure equipment in oil and gas operations, helping to maintain safety, protect assets, and improve production efficiency.

View Details

Tubing hanger with electrical feedthrough for ESP applications

The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility. View Details

LM2500 DLE Gas Turbine

The LM2500 DLE Gas Turbine is an advanced power generation unit designed to deliver high efficiency while significantly reducing emissions. Utilizing cutting-edge Dry Low Emissions (DLE) technology, it precisely controls fuel and air mixing to minimize nitrogen oxide (NOx) emissions.

The LM2500 DLE utilizes a single-rotor gas generator with a 16-stage compressor and a two-stage high-pressure turbine, coupled with cutting-edge DLE combustion technology to reduce nitrogen oxide emissions. It supports dual-fuel operation on a wide variety of fuels, including natural gas, diesel, aviation fuel, LPG, and even hydrogen blends with concentrations ranging from 5% to 95%. The turbine’s open configuration allows for faster maintenance and quicker engine replacement, minimizing downtime.

Its key benefit is utilizing advanced aeroderivative gas turbine technology with dual-fuel Dry Low Emissions (DLE) capability, achieving ultra-low emissions of just 15 ppm NOx on gas fuel, combined with broad fuel flexibility—making it ideal for meeting strict environmental regulations while providing fast, reliable power for dynamic grid demands.

View Details

Oil Absorbent Net-Bag Pillows with Handle

Oil Absorbent Net Bags represent a paradigm shift in spill cleanup technology. The unique composition, impressive absorption capacity, and Canadian origin position them as a cutting-edge solution for large spills. As industries continue to prioritize efficiency, cost-effectiveness, and environmental responsibility, Oil Absorbent Net Bags stand at the forefront of progressive spill cleanup methodologies. Oil absorbent Net Bags contain polypropylene strips in a nylon mesh bag. and absorbs up to 10L (2,64 gal) of oil for each bag and repels water. Introduction: Large spills, particularly those involving oil, demand a tailored approach to cleanup. The conventional methods often fall short, necessitating the introduction of specialized tools. Oil Absorbent Net Bags have emerged as a promising solution, offering a combination of advanced materials, superior absorption capabilities, and efficiency in maintenance and disposal processes. Look at the technical design optimizes both absorption capacity and structural integrity because strips of polypropylene, a highly effective oil-absorbing material, are encapsulated within a durable nylon mesh bag. Also, the bag has a high absorption capacity, it stands out to absorb up to 10 liters (2.64 gallons) of oil. This impressive capacity positions it as a reliable and efficient tool for large spill cleanups, minimizing the need for frequent replacements and optimizing resource utilization. A distinctive trait of these net bags is their ability to repel water while selectively absorbing oil. Oil Absorbent Net Bags have proven to be several times more absorbent than traditional methods. The specialized composition enables to outperform alternatives, ensuring a faster and more thorough cleanup process. This not only streamlines the cleanup operation but also translates into lower maintenance costs. The Canadian origin aligns with a culture of environmental responsibility. By choosing Oil Absorbent Net Bags, users contribute to sustainable practices, supporting a product with a minimal ecological footprint. And we ensure that this product meets and exceeds expectations of a good cleanup. Good for the environment and good for you. View Details

HDI 3200 MGS Differential Monitoring System

The HDI 3200 MGS Differential Monitoring System is a battery-powered, stand-alone device designed to monitor critical pressures and temperature in Mud Gas Separator operations within oil and gas drilling environments. It measures and displays the differential pressure between the liquid seal and mud gas pressure, along with monitoring the mud temperature. These measurements are essential for maintaining safe and efficient separator function, ensuring proper gas-liquid separation, and preventing equipment damage or hazardous conditions.

The system uses accurate and reliable pressure and temperature gauges, with pressure readings displayed in 1 PSI increments. It supports alternate engineering units to meet user preferences or site requirements and provides a 4-20mA output for integration with local or remote monitoring and control systems.

The enclosure is made of a durable polycarbonate/PBT alloy that is impact-resistant and UV stabilized, suitable for harsh field conditions including exposure to sunlight, moisture, and rough handling. Its compact, modular design allows for easy installation and maintenance.

The 3200 MGS Differential Monitoring System is essential in drilling operations for continuously monitoring pressure differences and temperature within Mud Gas Separators. This helps ensure the separator is functioning correctly by preventing gas or liquid buildup that could lead to equipment damage or unsafe conditions. By providing real-time data, the system supports safer drilling processes, reduces downtime, and helps maintain optimal performance in challenging well conditions.

View Details

Hydraulic equipment Leasing

Enhance Your Operations with Hydraulic Equipment Leasing from CWB National Leasing Elevate Your Business with Flexible and Efficient Equipment Solutions In the competitive world of construction and industrial operations, having access to advanced hydraulic equipment is key to enhancing efficiency and productivity. Canadian Western Bank (CWB) National Leasing offers a compelling solution for businesses looking to lease hydraulic equipment. Here's how this choice can be a catalyst for growth and efficiency in your business: 1. Swift Access to Hydraulic Equipment Understanding the urgency in your business operations, CWB National Leasing ensures a fast and efficient leasing process. Typically, they notify your equipment dealer about the payment within 48 hours of lease application approval. This prompt service means your hydraulic equipment can be delivered and ready to use quickly, keeping your projects on schedule. 2. Maximized Financial Flexibility Leasing hydraulic equipment with CWB National Leasing boosts your purchasing capacity. Instead of a significant one-time purchase, you can manage finances better with periodic payments. This approach frees up capital for other business needs. Additionally, for a small increase in payments, you can customize your equipment with additional features or accessories, enhancing its functionality. 3. Optimal Cash Flow Management The lease structure allows for smaller payments over the term, enabling the equipment to start contributing to your revenue while it's still being paid off. This strategy is crucial in maintaining a favorable balance between expenses and income. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, to align with your business’s revenue cycle. This flexibility is particularly beneficial for businesses where income may vary throughout the year. 5. Potential Tax Benefits Leasing can offer tax advantages, such as the ability to expense lease payments, as opposed to depreciating the equipment cost. It’s advisable to consult with a tax advisor to explore how leasing can positively impact your business’s tax position. Conclusion Opting to lease hydraulic equipment through CWB National Leasing is a strategic decision that empowers your business with necessary tools while maintaining financial agility. It ensures access to state-of-the-art equipment, essential for efficient and effective operations, without the financial strain of a large upfront investment. This approach paves the way for enhanced operational capabilities, growth, and profitability in your business endeavors. View Details

Bottomhole Pressure Instrument Hangers and Tools

Elevate Downhole Efficiency with HOCA Oil Tools' BHP Tools for Landing Nipples In the sophisticated world of downhole operations, where precision and efficiency govern success, the significance of specialized tools cannot be overstated. HOCA Oil Tools, at the forefront of downhole technology, proudly presents our line of BHP Tools for Landing Nipples, specifically engineered to support wireline operations and ensure seamless integration and functionality in landing nipple environments. HOCA's BHP Tools for Landing Nipples: Unmatched Precision and Reliability Designed with the end-user in mind, our BHP Tools for Landing Nipples offer a comprehensive solution for monitoring bottom-hole pressure (BHP) and other downhole parameters. These tools are essential for optimizing wireline operations, allowing for accurate data recording and ensuring the safe and secure placement of geophysical instruments within landing nipples. Crafted from premium materials and engineered to withstand the challenging downhole environment, our BHP tools exemplify our dedication to quality, innovation, and reliability. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we understand the challenges faced in the oil and gas industry and are committed to providing solutions that enhance operational success. Our BHP Tools for Landing Nipples represent this commitment, offering a level of precision, efficiency, and reliability that sets new industry standards. Choosing HOCA’s BHP Tools for your downhole operations means not only equipping yourself with superior tools but also partnering with a company that stands behind its products with unparalleled support and expertise. Opt for HOCA Oil Tools for your landing nipple needs and take your downhole operations to the next level. Partner with us to leverage the advantages of our BHP Tools and experience enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, elevate your wireline operations with tools that blend innovation with reliability – driving your success downhole. View Details

7" HP-5 Hydraulic Set Production Packer 26-29 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Sustainability Consulting

Elevate Your Business Towards Sustainability: Unleash Growth and Green Opportunities with ELEKS Sustainability Consulting In a world where sustainability is no longer an option but a necessity, ELEKS Sustainability Consulting emerges as your guiding light towards net-zero carbon emissions and environmentally-conscious growth. With a holistic approach encompassing consulting, implementation, and scaling, we offer an all-encompassing solution to drive sustainability while propelling your business forward. Paving the Way to Sustainability Success: Facilitate Sustainability Initiatives: Whether you're working towards net-zero carbon strategies or seeking to reduce your carbon footprint, our sustainability consulting services provide expert guidance. Our seasoned industry experts specialize in automating and optimizing processes for CO2 emission reduction. We'll guide you through end-to-end sustainability activities and empower your in-house team with environmental expertise. Optimize Project Costs and Timelines: Our comprehensive green consulting service ensures a cost-effective sustainability strategy. With three decades of software development experience and a network of cross-industry experts, we'll ensure your sustainability project aligns with your goals, budget, and timelines. Ensure Compliance and Avoid Penalties: As global sustainability frameworks become more comprehensive, compliance is critical. Our consultants help you navigate the complex landscape, ensuring transparency across your value chain and meeting GHG reporting frameworks and climate change legislation. Make Informed Investment Decisions: Our sustainability experts conduct thorough market research, empowering you to prioritize sustainable solutions. With a high-level roadmap and comprehensive data, you'll be equipped to make strategic decisions that drive sustainability and growth. Drive Sales and Foster Customer Loyalty: Elevate your brand by placing sustainability at its core. Our consulting services, backed by software development and digital transformation expertise, create a customer experience that resonates. This approach expands your client base, boosts customer retention, and fosters loyalty. Expand into New Markets: With sustainability as a focal point, explore new opportunities and markets. We analyze your objectives, research extensively, and help design services that resonate with your target markets, adding tangible business value. Unlocking Sustainability Potential - What's Included: Advisory on GHG Management: Our sustainability platform empowers you with consultancy on GHG accounting, reduction, and removal. Achieve transparency, traceability, and efficiency on your journey to net-zero. Our ready-to-use IT solution for carbon management is customizable to your needs. Technology Market Research: Navigate existing sustainability solutions from a business and technology perspective. Identify solutions that seamlessly enhance your market offerings and operations. Sustainability-Led Opportunity Scoping: Uncover new business opportunities and revenue streams by aligning the latest technologies and market trends with your expertise. A Journey Guided by Expertise: Conducting Initial Research: We dive deep into comprehensive market research, surveys, and interviews with stakeholders to understand your organization's challenges, needs, and goals. Defining Opportunity Areas: Based on your priorities, we define focused opportunity areas that promise the best returns, ensuring optimal investment in green business goals. Developing Business Cases: We create high-level business cases considering desirability, feasibility, and viability. These cases serve as a foundation for your sustainability journey. Crafting Architecture Vision: Once business cases are approved, our software experts identify tech stacks and components that align with your requirements, ensuring efficient execution. Presenting Outcomes: Our consulting culminates in a detailed report, offering a holistic description of business opportunities, technology areas, prioritization, implementation roadmaps, and budget proposals for your sustainability strategy. Our Focus Areas: • GHG Emissions Accounting, Reduction, and Removal • Transparency and Traceability • Waste Management • Circular Economy • Energy Transition • Life Cycle Assessment (LCA) Why Choose ELEKS Sustainability Consulting? End-to-End Sustainability Consulting: With over 30 years of software development and domain expertise, ELEKS Sustainability Consulting provides a comprehensive solution for all your strategic sustainability needs. Science-Based Approach: Our partnerships with universities and research institutions ensure evidence-based results. We engage niche specialists for reliable, data-driven sustainability outcomes. Robust Technological Capabilities: We integrate consulting outcomes seamlessly into your ecosystem and offer white-label solutions, minimizing additional investment in internal projects. Elevate Sustainability with ELEKS: ELEKS Sustainability Consulting is more than a service; it's a transformative journey that merges sustainability with growth. Join us as we navigate towards a sustainable future, where your business thrives while fostering a healthier planet. View Details

Heaters Leasing

Modular Telemetry System

Unlock the Power of Deep-Water Connectivity with Poseidon's Modular Telemetry System Discover the Versatile Solution for Subsea Communications Diving into the depths of the ocean requires cutting-edge technology that can handle the challenges of the underwater world. Poseidon Robotics proudly presents the Modular Telemetry System (MTS) - a game-changing solution that will redefine the way you communicate with your remote underwater systems. The Bottleneck Breaker Trying to fit a bottle into a square space? Say goodbye to those limitations with the Poseidon MTS. Our rectangular design revolutionizes subsea telemetry, offering a multitude of Ethernet, video, and serial connections for deep-water ROVs, drills, and other systems. Tested to exceed 4,000m water depth, this system is built to perform even in the harshest subsea environments. Simplicity in Retrofitting Upgrading older ROVs and expanding their capabilities has never been easier. The MTS package provides everything you need to make use of a spare fiber connection and A/C or high voltage power. Retrofitting older ROVs with multiple sensors on a tooling skid or integrating custom equipment like geotechnical platforms has never been more streamlined. Compact Yet Powerful The Poseidon MTS boasts an impressive feature set while maintaining a compact size. Measuring at less than 2 feet long and only 5.5 inches wide, it's about the height of a coffee mug. But don't be fooled by its size; it packs a punch with up to 18 different accessory connections and half a kilowatt of onboard power, all rated to a remarkable 4,000 meters depth. Engineering Excellence Using modern 7075 Aluminum alloy and employing advanced FEA modeling and testing, we've ensured the MTS is built to withstand the most challenging subsea conditions. Its robust construction guarantees durability and reliability, offering peace of mind during your underwater missions. Customization and Expansion The MTS's versatility knows no bounds. It replaces larger telemetry bottles, offering ample space for multiple pieces of equipment. Whether you need a full telemetry system with instrument power or wish to expand your ROV skids, the MTS has got you covered. Unmatched Connectivity The MTS Subsea Mux is the heart of the system, featuring: • Depth Rating: Dive confidently up to 4,000 meters, exploring new depths with ease. • Multiple Connectivity: Enjoy 16x serial ports, 2x PAL/NTSC video, and 1x Ethernet, providing you with a wide range of communication options. • Onboard Power: Boasting 500W of onboard regulated 26/12VDC power, it ensures your remote sensors receive the power they need. Seamless Surface Integration The Surface Rack complements the MTS with its 19-inch Rack 2U chassis and RJ45 outputs, delivering low latency connections for a smooth surface experience. Powerful Transformation with MTSX If you require a full telemetry system with instrument power, our compact MTSX transformer assembly is the perfect addition. Featuring an integrated umbilical gland and oil-filled 3kW transformer with 3kV input, it provides unparalleled performance. Explore with Confidence Poseidon Robotics empowers you to explore the depths with confidence. With the Modular Telemetry System by your side, you have the keys to unlocking new subsea possibilities. Learn More Today To discover how the Poseidon Modular Telemetry System can elevate your subsea operations, reach out to us and join the ranks of industry leaders who trust the future of deep-water communications with Poseidon Robotics. Dive Deeper, Go Farther. View Details

Scaffolding Leasing

Enhance Your Construction Projects with Scaffolding Leasing from CWB National Leasing Boost Efficiency and Financial Agility in Your Construction Business In the construction industry, scaffolding is a vital component for ensuring safety and accessibility. Opting to lease scaffolding equipment through Canadian Western Bank (CWB) National Leasing provides a flexible and economically advantageous solution for your construction needs. Here’s how leasing scaffolding can elevate your construction operations: 1. Quick Equipment Accessibility CWB National Leasing prioritizes efficiency in its leasing process. With a commitment to fast decisions, typically within 48 hours of your application, you can expect rapid notification to your equipment dealer regarding payment. This speedy process means your scaffolding equipment can be on-site and ready for use promptly, keeping your construction projects on schedule. 2. Enhanced Purchasing Power Leasing scaffolding with CWB National Leasing allows you to leverage your financial resources more effectively. By choosing periodic payments over a lump-sum purchase, you free up capital for other essential aspects of your business. Additionally, you have the option to upgrade your scaffolding with extra features or accessories for a minimal increase in payments. 3. Balanced Cash Flow Management The lease structure offers smaller payments over the term, enabling your scaffolding to start contributing to your project's efficiency while it’s being paid off. This approach is key to maintaining a healthy balance between your expenses and revenue. 4. Flexible Payment Plans Understanding the unique financial needs of construction businesses, CWB National Leasing provides various payment options, including seasonal, semi-annual, or annual plans. This flexibility ensures that your payments align with your business’s revenue cycle, accommodating the seasonal nature of many construction projects. 5. Potential Tax Benefits Leasing scaffolding can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. It’s advisable to consult with a tax advisor to understand how leasing can positively affect your business’s tax position. Conclusion Choosing to lease scaffolding equipment through CWB National Leasing is a strategic decision that empowers your construction business with the necessary tools while maintaining financial flexibility. It enables you to have access to essential scaffolding for your projects without the financial burden of a large upfront investment, paving the way for enhanced safety, efficiency, and profitability in your construction endeavors. View Details

Work Barge in European waters

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Tubing Hanger Coupling - 4 ½” to 2 7/8”

The 4 ½ x 2 7/8” Tubing Hanger Coupling is a specialized connection component used in oil and gas wellhead systems to join two different sizes of upset tubing—4 ½-inch and 2 7/8-inch. This size combination is commonly selected when there is a need to transition from a wider tubing hanger profile to a smaller production string, without significantly restricting flow or compromising mechanical strength. The slightly larger 2 7/8” production tubing allows for greater internal flow area than smaller alternatives, making this configuration well-suited for completions that aim to support moderate to high production rates.

The coupling is designed with a union nut mechanism, which enables installation without rotating the Christmas tree or disturbing other surface equipment. This simplifies operations, especially in space-limited or sensitive surface environments. Both the top and bottom threads of the coupling can be manufactured to meet specific customer requirements, ensuring compatibility with a range of tubing string designs. Additionally, the coupling is threaded to accommodate a back pressure valve, offering an important safety feature by allowing well pressure to be managed during maintenance or pressure control procedures.

Constructed from high-grade steel and compliant with API standards, the 4 ½ x 2 7/8” Tubing Hanger Coupling offers high durability, corrosion resistance, and the mechanical integrity required for challenging downhole conditions. By supporting a secure, pressure-tight connection between tubing sizes, it plays a key role in maintaining well integrity and operational efficiency in various oil and gas production scenarios.

View Details

Perforating Guns

ID OILTOOLS is proud to offer the cutting-edge HERO-HR™, SUPER HERO®, and HERO® charges from Owens, which feature advanced, patented technology that yields numerous benefits for perforating operations. With the addition of tungsten in shape charges years ago, debris was an undesirable byproduct that reduced the effectiveness of the perforation tunnel volume. Owens' patented liner material eliminates this issue by using molybdenum and an improved geometry to prevent spent tungsten from becoming a solid. The result is a clean perforation tunnel that reduces frac breakdown pressures and improves flow efficiency, making the HERO® line of Gun Systems an industry leader. The HERO® Line of Perforating Gun Systems is designed with the latest 'New Technology' developed by Owens Oil Tools, certified under new API RP 19B Standards. Owens' Perforating Gun Systems are available in various sizes and types, ensuring a perfect match for any completion design and formation demands. ID OILTOOLS is proud to offer HERO® charges to our customers, ensuring maximum penetration and flow efficiency while reducing the debris typically associated with high-density liner materials. Trust ID OILTOOLS to provide you with the best-performing, most effective perforating solutions on the market. View Details

Control Line Protector

The manufacturer offers two types of control-line protectors — both designed to provide maximum control-line protection. The first type of protector is a unique design that combines a steel outer shell and a resilient inner liner. The second type is all metal, which provides fullover-the-coupling protection for virtually any size electrical submersible pump cable, bare tube, or encapsulated bundle configuration. The all-metal protector is also available for mid-joint applications. A variety of channels that can accommodate a combination of bare control lines and/or dual encapsulated control line is offered for each of the protectors. Both types of protectors use a tapered pin lock to provide maximum gripping force. The tapered pin lock can be installed by hand and driven to the locked position by a pneumatic hammer or a manual hammer tool. *information sourced from manufacturer View Details

Thru-Tubing MatrixStixx 2 inch

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionize Your Operations! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! StimStixx Technologies is proud to present our cutting-edge Thru-Tubing Acid Stimulation system, designed to meet all your needs with ease and precision. Our innovative product offers a hassle-free deployment process via electric wireline, ensuring a seamless integration into your operations. Available in both HCL and HCL/HF acid blends, our solution guarantees the utmost effectiveness in achieving your desired results. At the heart of our Thru-Tubing Acid Stimulation system lies a specially formulated solid acid stick. Whether you're using slickline, wireline, coil tubing, or tractor-conveyed methods, our solid acid stick delivers heated acid vapor with pinpoint accuracy directly to the zone of interest. This groundbreaking approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the heated acid vapor. Not only does our system deliver exceptional performance, but it also provides numerous benefits that will enhance your operations in more ways than one. By utilizing our Thru-Tubing Acid Stimulation, you'll experience reduced CO2 emissions, lower downtime, and simplified implementation. The increased precision and fast-acting nature of our solution will save you valuable time and resources, while also reducing manpower, rig, and equipment costs. Additionally, the elimination of contaminated effluent means a reduced risk of spills at the surface and eliminates the need for post-treatment clean-up or disposal. Join the countless businesses already benefiting from our Thru-Tubing Acid Stimulation system. Embrace efficiency, precision, and environmental responsibility with StimStixx Technologies. Contact us today to revolutionize your operations and unlock a new level of success! View Details

Product and Service Design

ELEKS: Crafting Excellence through Innovative Product and Service Design In the fast-paced world of technology and business, innovation is the key to staying ahead. At ELEKS, we're more than just a software engineering company – we're your partners in innovation. Our Product and Service Design offerings are your gateway to creating exceptional domain-specific technology solutions that resonate with your brand's vision and scale. Bringing Your Visions to Life: We're here to turn your business ideas into reality. With a deep focus on understanding your users' needs, we help you design and validate disruptive concepts that resonate with the market. Our seasoned experts collaborate with you to define your value proposition and chart an actionable roadmap to success. Revitalize Existing Offerings: Are users leaving your products untouched? Our services extend to reimagining your current offerings for growth. We identify revenue streams within your existing products, coupled with enhancing the efficiency of legacy systems, to rejuvenate your market presence. Smart, Forward-Looking Decisions: Navigating uncertainty requires foresight. Our team of experts guides you in creating sustainable, industry-leading product strategies. Whether you're steering a new product or aligning short-term goals with a visionary outlook, we're here to help you stay ahead of the curve. Testing Bold Business Concepts: Entering a new market or amplifying your presence? Our team delves deep into your business goals, market dynamics, and technological horizons. Armed with this analysis, we craft service concepts that align with your needs and are backed by technology-proven solutions. Accelerate Time-to-Market: Your success is our mission. Our product design service accelerates your journey from concept to market. Startups secure investment, and enterprises streamline delivery processes, all while validating ideas through prototyping and testing. Enhance Customer Experience: Transition from mere communication to complete immersion. We identify gaps in your customer experience and develop actionable plans for a service proposition that captivates, engages, and leaves a lasting impression. Unlock the ELEKS Advantage: Experience counts. Since 2009, our design and technology consulting team has propelled visionary entrepreneurs and product leaders forward. We empower you to transform groundbreaking ideas into tangible customer value. Top Ten Benefits of ELEKS' Product and Service Design Services: 1. Breakthrough Ideation: Transform ideas into game-changing concepts backed by user insights. 2. Enhanced Engagement: Create customer-centric strategies through behavioral science. 3. Strategic Roadmapping: Chart a comprehensive product strategy with clear priorities. 4. Winning Business Models: Validate models for competitive advantages and market fit. 5. Technological Excellence: Design products that optimize performance and scalability. 6. Deep User Insights: Understand customers through qualitative and quantitative research. 7. Inclusivity Assessment: Extend reach by crafting products inclusive to diverse needs. 8. Innovative Workshops: Unleash potential through tailored Innovation Workshops™. 9. Streamlined Experience: Identify bottlenecks and unlock new opportunities. 10. Expert Product Strategy: Implement scalable solutions with comprehensive guidance. ELEKS is your conduit to design and innovation, committed to transforming your ideas into impactful reality. From envisioning concepts to realizing industry-leading solutions, we are your steadfast partners in innovation. With ELEKS, your aspirations find a partner dedicated to propelling them into the future. Welcome to the realm of design and innovation – welcome to ELEKS. View Details

HDI M100 Pressure Gauge

Construction Management Platform

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available. View Details

3” Tubing End Locator

The 3” Tubing End Locator is a mechanical downhole tool used to identify the precise end of a 3-inch production tubing string during well intervention operations. It provides a clear physical indication when the tool reaches the bottom of the tubing, helping to ensure accurate placement of equipment inside the well.

Designed specifically for tubing with a 3-inch outer diameter, the tool features a maximum outside diameter of 2.500 inches. This sizing ensures smooth movement within the tubing while maintaining close contact, allowing the tool to operate effectively without the risk of sticking or misalignment. At the core of the design is a spring-loaded finger mechanism that extends outward when the tubing end is reached. This mechanical movement is transmitted to the surface as a tactile response, signaling that the tubing bottom has been contacted.

The tool includes standard threaded connections—such as a 15/16 - 10 UN pin on the top and a 1 - 11 ½ NPT box on the bottom—which makes it compatible with a variety of toolstring configurations. It can be easily incorporated into slickline, wireline, or coiled tubing assemblies without the need for special adapters.

Constructed from durable, corrosion-resistant materials, the tubing end locator is built to perform reliably in downhole environments that involve high pressure, elevated temperature, and exposure to fluids. Its fully mechanical operation ensures a high level of dependability and minimizes the need for maintenance, especially in conditions where electronic systems may not be suitable.

The 3” Tubing End Locator is a practical solution for confirming tubing depth when preparing the well for further intervention.

View Details