Ballycatter.ca - Industrial Equipment

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Storm Choke 2-1/2 inch H

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

CSA 120 unit Locking FAST charger rack

Secure and Streamline Your Equipment Charging with the CSA 120 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 120 Unit Locking FAST Charger Rack (Part # NWI-NWCR-120BLC), a robust and efficient charging solution designed for large-scale mining, construction, and industrial operations. This high-capacity charger rack combines rapid charging technology with enhanced security, making it an essential component for any operation looking to optimize equipment readiness and safety. High-Capacity Charging for Large Operations The CSA 120 Unit Charger Rack is tailor-made for operations that require fast and efficient charging of a large number of devices. With the capacity to charge 120 units simultaneously, it offers charging times of just 4 hours for the WISE LITE2 and 5 hours for LAMP3A/4A models. This impressive speed ensures that your equipment is always ready for use, minimizing downtime and maximizing productivity. Enhanced Security with Locking Feature One of the standout features of the CSA 120 Unit Charger Rack is its locking mechanism. This added layer of security is crucial for operations where equipment safety and prevention of unauthorized access are paramount. The locking feature ensures that your valuable equipment is protected during charging, providing peace of mind and enhanced safety in the workplace. Space-Efficient Design for Busy Workplaces Despite its large capacity, this charger rack is designed with space efficiency in mind. Its single-sided configuration allows for easy placement in equipment rooms, charging stations, or in areas where space is at a premium, ensuring a streamlined and organized charging setup. Built for Durability and Reliability Constructed to withstand the demanding environments typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures it can endure daily use, offering long-term, dependable performance. Ideal for Comprehensive Charging Management The CSA 120 Unit Locking FAST Charger Rack is an ideal solution for mining companies, construction firms, and rental equipment providers managing large fleets of devices. Its ability to securely charge a significant number of units quickly makes it a valuable tool for large teams and operations. Upgrade Your Charging Infrastructure Today Invest in the Wisdom CSA 120 Unit Locking FAST Charger Rack from Provix to enhance the efficiency and security of your charging processes. Visit www.provix.net to learn more about this advanced charging solution and discover our wide range of high-quality mining equipment. View Details

24 inch Well Servicing Pipe Wrenches for torquing tubulars and downhole tools

The adjustable pipe, or Stillson, wrench is used to hold or turn pipes or circular bars. This wrench has serrated jaws, one of which is pivoted on the handle to create a strong gripping action on the work. When torquing with a pipe wrench remember the tool push phrase - 24 tight and 48 loose! View Details

Structured Cabling

Structured Cabling by Nulux Network Solutions: The Bedrock of Your Resilient Network Infrastructure in the Oil and Gas Industry In the intricate and unrelenting realm of the oil and gas industry, the backbone of successful, uninterrupted operations rests on a sturdy network infrastructure. Not merely a conduit for communication, but a veritable lifeline that ensures every unit, every device, and every system communicates seamlessly, securing the continuous flow of vital data across every echelon of your business. This is where Nulux Network Solutions champions your endeavors through our unparalleled expertise in Structured Cabling. Nulux Network Solutions: Your Harbor in the Tempest of Network Demands Your venture into the industrious domains of energy extraction and refinement is formidable, laden with challenges that demand a network just as robust and reliable as the spirited teams operating within. Nulux, with a lauded heritage of over two decades, curates tailored copper cabling networks, ensuring that your network infrastructure stands unwavering amidst operational rigors. While our specialization permeates various strands of telecommunications and networking, structured cabling, particularly utilizing copper, becomes a focal point for businesses that demand: High-Bandwidth Transmission: Facilitating transmissions up to 10 Gbps, ensuring your data flows unrestrained. Reliability: A steadfast performance, ensuring your operations are never hampered by network downtimes. Cost-Effectiveness: A pragmatic solution that assures optimal performance without burdening operational costs. Copper Cabling by Nulux: The Confluence of Flexibility, Durability, and Affordability Structured cabling, particularly utilizing copper, furnishes your business with a network that is not just remarkably flexible, easily terminated, and reliable, but also phenomenally durable, ensuring that the infrastructure remains unfazed amidst the most demanding operational scenarios. Nulux enhances this inherent virtue of copper cabling by ensuring: Holistic Network Solutions: From the embryonic stages of design and planning to installation and life cycle support. Upgrades & Evolution: Ensuring your network is never obsolete, perpetually evolving in tandem with technological advancements. Tailored Solutions: Customizing solutions that cater explicitly to your voice, data, and video service requirements, ensuring no aspect of your operations is ever compromised. Immerse Your Operations in a Cocoon of Network Security and Reliability Navigating through the complexities of DCS network upgrades and deploying copper cabling systems, encompassing telephone, ethernet, coax, and hybrid networks, Nulux has not just crafted but meticulously refined our approach towards network solution delivery. Our commitment towards delivering high-quality, high-performance networks at affordable rates has been unwavering and resolute. Steer Your Business Towards Operational Excellence with Nulux Your business, deeply embedded in the vital sectors of energy, seeks more than just a service provider. It seeks a partner that comprehends the profundity of operational demands and curates solutions that are not merely effective but exemplary. Nulux Network Solutions invites you to experience a partnership where your network demands are met with solutions that are not merely about connectivity but about ensuring your operational pulse never falters. Reach out to us today, and let’s architect a network that becomes the silent, steadfast guardian of your operations, ensuring every bit of data traverses with reliability, every communication occurs seamlessly, and your business thrives amidst the operational challenges of the energy sector. View Details

Ball Valve Lever Operated – 2-Way Female x Female End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 psi – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated – 2-Way Female × Female is a high-performance isolation valve designed for oil and gas piping systems where reliable flow control is essential.

Its female × female connections allow for secure inline installation directly onto male-threaded pipes or fittings, simplifying assembly, reducing the need for additional adapters, and minimizing potential leak points. This configuration is particularly useful in production lines, injection lines, sampling lines, and other pipelines with male-threaded ends.

The valve features a floating ball design that provides seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions. Operation is simple and efficient with a quarter-turn lever, allowing fast opening and closing with low torque. The internally loaded stem with shoulder prevents blowout, enhancing operational safety, while replaceable seats and packings extend service life. The maximum orifice design also minimizes pressure drop across the valve.

This valve is suitable for a wide range of oil and gas applications, including upstream, midstream, and downstream pipelines. It is factory tested to ensure leak-proof performance and can be supplied to meet NACE MR0175 standards and fire-safe requirements. Heat code traceability ensures quality and material verification for all components, making this valve a dependable and durable solution for industrial environments.

View Details

Wireline Set 7" Drillable Bridge Plug

The Ballycatter Model WC-WLBP Wireline Set Drillable Bridge Plug is a high-performance isolation tool designed for use in a variety of wellbore applications, including zonal isolation, well stimulation, cementing operations, and both temporary and permanent well abandonment.

Engineered for reliability and efficiency, this bridge plug is rated for 10,000 psi and temperatures up to 400°F, making it suitable for challenging downhole environments. One of its key advantages is its versatile setting options, allowing it to be deployed via wireline, mechanical, or hydraulic methods, depending on operational requirements.

The WC-WLBP model is also part of a modular system, enabling easy conversion between a cement retainer, a wireline set bridge plug, or a mechanical set bridge plug, providing adaptability across multiple well intervention needs.

The WC-WLBP’s advanced design enhances its deployment efficiency and downhole performance. The tool features increased clearance and a locked construction, which improves its run-in characteristics by minimizing the risk of premature setting or swab-off forces during descent. Additionally, the body lock ring mechanism plays a crucial role in maintaining consistent pack-off by trapping the setting force within the element. This ensures a reliable seal, even during pressure reversals, preventing unwanted fluid migration between isolated zones.

The bridge plug’s drillable construction allows for efficient post-operation removal, reducing operational downtime and ensuring smooth wellbore restoration when needed.

As part of Ballycatter’s modular plug system, the WC-WLBP provides significant operational flexibility by allowing conversion between various plug types, reducing the need for multiple specialized tools and streamlining inventory management. Whether used as a standalone bridge plug or adapted into a cement retainer, this tool offers high reliability and performance in demanding well conditions.

Its robust pack-off mechanism and superior pressure-holding capabilities make it an ideal choice for operators seeking a dependable solution for wellbore isolation and completion operations.

View Details

Inverter and Charger Combination

Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue View Details

U-KWIK Cross Coupling Protector

HDI 2100 Pump Stroke Counter System

When it comes to accurate and reliable monitoring of mud pumps, the HDI 2100 Pump Stroke Counter stands as the industry's leading solution. Designed as an intrinsically safe, certified, solid-state electronic stroke counter, the HDI 2100 ensures precise tracking and display of total accumulated mud pump strokes and stroke rates. Seamless Integration with the HDI 9000 Choke Console System: The HDI 2100 is most commonly found within the HDI 9000 Choke Console System, where it plays a vital role in monitoring and displaying the stroke data of up to four individual mud pumps simultaneously. With its advanced capabilities, this stroke counter provides real-time insights into pump performance, enabling operators to make informed decisions for efficient drilling operations. Uncompromising Precision and Reliability: Equipped with a quartz crystal oscillator, the HDI 2100 delivers high-precision stroke counts with zero drift. This ensures accurate and reliable measurement, even in harsh environments and high vibration conditions encountered in land and offshore drilling. Constructed with a stainless steel case and stainless steel piezo switches, the HDI 2100 is built to withstand the toughest conditions for long-lasting performance. User-Friendly and Low Maintenance: Once installed, the HDI 2100 requires virtually no maintenance or calibration, allowing you to focus on your operations with confidence. The solid-state display provides clear and reliable information, while the simple interface allows for easy calibration when needed. Battery-powered operation ensures portability and convenience, while a low battery indicator keeps you informed about power levels. Versatile Configuration Options: The HDI 2100 offers various configuration options to suit your specific needs. You can choose between micro-switch or proximity sensor inputs, depending on your preference and operational requirements. Dual sensors are also available for seamless integration with HMI/PLC systems, enhancing the automation capabilities of your drilling processes. Certifications You Can Trust: The HDI 2100 Pump Stroke Counter is CSA certified as Intrinsically Safe Class 1, Division 1, Groups A, B, C, and D. Additionally, an optional ATEX certification (II 1 G, Ex ia IIC T4) is available for enhanced safety in hazardous environments. Experience the HDI Advantage: With the HDI 2100 Pump Stroke Counter, you gain access to unrivaled accuracy, reliability, and ease of use. Our commitment to excellence ensures that all HDI Gauges provide safety, accuracy, reliability, and low maintenance for our valued customers. Contact our experienced team today to discuss your specific monitoring requirements and discover how the HDI 2100 can revolutionize your mud pump operations. Trust Houston Digital Instruments for the ultimate monitoring solution. Where Safety Meets Performance - HDI, your partner in precision measurement. View Details

2 7/8" SCSSSV – Surface Controlled Subsurface Safety Valve – 5,000 PSI – ISO

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 2 7/8" Surface-Controlled Subsurface Safety Valve (SCSSSV) is designed to shut in a well to prevent uncontrolled flow caused by equipment failure or damage. It is installed in the upper wellbore to provide emergency closure of the production tubing, isolating the wellbore if there is a failure in the surface production control system or downhole equipment.

The valve operates on a fail-safe principle, closing automatically when control pressure is lost. It features a flapper-type mechanism and is surface-controlled through hydraulic pressure. The design is self-equalizing, which helps maintain pressure balance across the valve during shut-in and restart, ensuring consistent performance.

This valve is wireline retrievable, meaning it can be removed or serviced without pulling the entire tubing string, reducing well intervention time. It is compatible with landing nipples having seal bore diameters of 2.125", 2.188", or 2.313", allowing flexibility in well design.

The valve is rated for working pressures up to 5,000 psi and offers internal flow passage options of 0.81" or 1.12". The sealing surfaces are located outside the flow path when the valve is open, minimizing erosion and wear. The flapper is made from solid bar stock to provide mechanical strength and durability.

This configuration is commonly applied in wells where emergency shut-in is necessary and regular maintenance without tubing retrieval is preferred.

View Details

ESP Straight Pull 7" Packer

The Ballycatter Model WC-ESP Straight Pull 7” Packer is a hydraulic-set production packer built for ESP completions in 7” casing, offering secure wellbore isolation and efficient ESP deployment. Its pass-through section ensures uninterrupted power delivery to the ESP unit, while the bi-directional slips anchor the packer against pressure fluctuations and tubing movement. Designed for high-pressure and high-temperature wells, its single-piece mandrel construction and Acner Array Packing Element provide exceptional durability and sealing reliability.

The WC-ESP Straight Pull 7” Packer is set hydraulically by pressurizing the tubing against a plugging device, locking the packer in place for long-term performance. The straight pull retrieval mechanism enables fast and hassle-free removal, reducing intervention time and operational costs. Compatible with all major cable pack-off or feed-thru devices, this packer is a versatile, high-performance solution for ESP completions in medium-sized casing applications.

View Details

High Density Fibre cable splicing

Enabling Seamless Connectivity through High-Density Fiber Cable Splicing at Nulux Network Solutions In the interconnected world of the oil and gas industry, where vast swaths of data traverse through networks, orchestrating the symphony of myriad operations, Nulux Network Solutions establishes itself as the maestro, ensuring every note, i.e., data byte, flows seamlessly, securely, and efficiently. The Core of Energy Sector: Data Transmission Navigating through the contemporary oil and gas sector necessitates not just the flow of energy, but the incessant, uninterrupted, and secure transmission of data. Nulux, proffering state-of-the-art products, solutions, and services across the comprehensive energy value chain, takes the lead in facilitating this vital data flow. Our commitment extends beyond providing robust solutions - we forge a pathway toward a more sustainable future, infusing every facet of your operations with technology that ensures your data travels not only with speed but also with uncompromised security. Nulux’s High-Density Fiber Cable Splicing: Where Technology Meets Excellence Fiber optic communication stands out as a linchpin in the modern digital world, especially within the realms of the oil and gas sector. Amidst the vast landscapes, both onshore and offshore, where operations unfold, ensuring that data connects every operational node is pivotal. Here, our High-Density Fiber Cable Splicing service comes to the forefront as a beacon of technological excellence and operational efficacy. Enhanced Connectivity: Our high-density fiber cable splicing ensures that your operations are interlinked with a network that offers enhanced, unfaltering connectivity, even in the most challenging terrains and under stringent conditions. Bandwidth Prowess: Harness the power of expanded bandwidth, facilitating the swift flow of large volumes of data across your operational network, ensuring every decision is backed by real-time data. Robust and Reliable: With a focus on durability and reliability, our fiber cable splicing ensures your network withstands the challenges, providing a robust platform for data transmission. Crafting Futures with Sustainable Data Management In the sprawling domains of the energy sector, where sustainability is progressively becoming a cardinal focus, enabling operations that are not only efficient but also eco-conscious is paramount. Our High-Density Fiber Cable Splicing embodies this principle, ensuring your data management is not only optimal but also leans toward sustainability. Navigating Through the Digital Terrain Together At Nulux, we do not merely offer a service; we extend a partnership. A partnership wherein your aspirations for operational efficiency, data security, and sustainable practices are realized through our technological solutions. Our High-Density Fiber Cable Splicing is more than a service – it is a commitment to ensuring your data flows through a network that is as steadfast, secure, and efficient as the operations it facilitates. Conclusion In a world where data permeates every operational stratum, ensuring it flows through a network that epitomizes reliability, security, and efficiency is crucial. Navigate the intricate digital landscapes of the oil and gas industry with Nulux, where your data is transmitted through networks forged from technological excellence and a commitment to sustainability. Join hands with Nulux Network Solutions, and let’s traverse through the digital journey towards a sustainable, data-driven future together. Because at Nulux, your data is not merely transmitted; it is cared for, safeguarded, and facilitated through a network where every byte is crucial in crafting a sustainable future. Let's illuminate the path towards a robust, interconnected, and sustainable operational future, together. View Details

Tubing Hanger Coupling - 4 ½” to 2 3/8”

The 4 ½” x 2 3/8” tubing hanger coupling is a specialized downhole component designed to connect two different sizes of upset tubing within a wellhead assembly. Upset tubing refers to tubing that has thicker, reinforced sections at the ends—called “upsets”—which strengthen the threaded connections and help withstand the mechanical stresses and high pressures encountered during well operations. This coupling provides a secure and pressure-tight transition between a larger 4 ½-inch tubing hanger and a smaller 2 3/8-inch production tubing string, enabling effective management of wellbore fluids and maintaining pressure containment.

Engineered to integrate seamlessly with tubing hanger spools, wrap-around tubing hangers (PTHSW), and ‘PTHS’-type tubing spools, this coupling forms part of a modular wellhead completion system. Its union nut design allows installation by screwing the coupling in place without rotating the Christmas tree, simplifying assembly and reducing the risk of damage during installation.

Both the top and bottom ends of the coupling are threaded to customer specifications, offering flexibility for various well configurations and allowing the installation of back pressure valves to maintain well control during operations. Manufactured to API standards and constructed from high-grade materials, the coupling delivers durability and reliable performance in demanding downhole environments characterized by high pressure, temperature, and corrosive fluids.

By facilitating a smooth and strong size transition between different tubing strings, the 4 ½” x 2 3/8” tubing hanger coupling supports well integrity, operational efficiency, and safety throughout oil and gas production.

View Details

Wrenches for professional maintenance of industrial equipment

A wrench ensures the workability of the object so that it continues to work as fast and effectively as before. It is basically used to provide a strong grip; it is also known as a spanner. Using a wrench is extremely easy. A double-ended tool with one end being like an open-end wrench or open-ended spanner, and the other end being like a box-end wrench or ring spanner. Both ends generally fit the same size of bolt. View Details

Tubing End Locator

InWaTec Combined: Pinpoint Precision with Tubing End Locator Services Accuracy is the cornerstone of successful well intervention and maintenance operations, and InWaTec Combined’s Tubing End Locator (TEL) running services exemplify this precision. Our TEL services provide clients with the certainty needed for depth correlation and critical downhole positioning, ensuring that all subsequent interventions are executed with pinpoint accuracy. The Crucial Role of the Tubing End Locator The TEL is an invaluable tool in the oil and gas industry’s arsenal, designed to accurately locate the end of the tubing string. This precise location is essential for depth correlation during various well servicing operations. InWaTec Combined's TEL services ensure that your team has the exact measurements necessary for efficient and effective intervention planning. Preparation for Precision Before deploying the TEL, it's crucial to ensure the tubing is clear of any debris that could obstruct the locator. InWaTec Combined’s preparatory procedures, which include running a gauge cutter or bailer, are meticulous steps that guarantee the TEL can smoothly navigate to and through the end of the tubing. This thorough clearing is part of our commitment to precision – we ensure that when the TEL is deployed, it operates in an unimpeded environment. Adaptable and Versatile Tooling Our TELs are equipped with a spring-loaded finger, enabling them to be run in various tubing sizes, ranging from 2-3/8? to 5-1/2?. This adaptability makes InWaTec Combined’s TEL services universally applicable, providing versatility without compromising on the accuracy of the tool. Whatever the tubing size, our TEL services can be tailored to meet the specific needs of the operation. Streamlining Operations with Accurate Measurements The accuracy provided by our TEL services streamlines subsequent operations by providing a reliable reference point. This eliminates guesswork, reduces the risk of error, and enhances the efficiency of operations such as setting packers, plugs, or perforating at precise depths. InWaTec Combined’s Promise of Excellence At InWaTec Combined, we understand the impact that accurate depth measurements can have on the success of well operations. Our TEL running services are a reflection of our promise to deliver excellence in every aspect of our work. We provide not just a service, but a partnership that enhances and ensures the precision of your well servicing tasks. Conclusion: Your Partner in Depth Correlation In conclusion, InWaTec Combined’s Tubing End Locator services are crucial for any operation that demands exact depth measurements. With our state-of-the-art tools and meticulous preparation, we ensure that every intervention is carried out with the confidence that comes from knowing the exact parameters of your well. Partner with InWaTec Combined, where precision is not just a metric; it's a mission. View Details

H Storm Choke 2 inch

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Chemical Injection Unit

Our chemical injection units can be used both onshore and offshore to support a variety of activities in the oil and gas industry. Continuous or standby duty, these chemical injection units are highly reliable and easy to operate. Clients use our chemical injection units for corrosion inhibition, wax inhibition, scale inhibition, hydrate removal, flocculent removal, sulphate removal, glycol injection, methanol injection, PH control, H2S scavenger injection, water chemistry adjustments, nitrate injection, and more. These skids are rated for offshore and desert conditions and can be customized for specific operating areas. View Details

Surface Controlled Subsurface Safety Valve FXE 2-3/8 inch

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Hydraulic cylinder for various industrial applications

A hydraulic cylinder is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end/head-end). View Details

Offshore Slickline Unit

Revolutionizing Offshore Operations: The Pinnacle of Slickline Services by InWaTec Combined In the dynamic world of oil and gas extraction, offshore platforms are the frontiers of human engineering prowess, and InWaTec Combined stands as a beacon of innovation in well intervention services. Our Offshore Slickline Unit represents the cutting-edge culmination of technology and expertise, designed to ensure the seamless operation of your offshore wells. The Essence of Slickline Operations At the heart of our service is the slickline operation, a critical aspect of well maintenance and testing. Utilizing a single strand wire, known for its robustness and simplicity, our operators skillfully navigate downhole tools through the wellbore's demanding environment. From bailers to pulling tools, stems to running tools, our slickline is the lifeline that facilitates precise interventions within oil and gas wells. Versatility at Depth Slickline's single strand wire is more than just a cable; it's a versatile tool in its own right. Whether it's deploying valves, installing plugs, or adjusting pressure regulators, slickline operations by InWaTec Combined can handle a multitude of tasks with finesse. Our operators are trained to execute complex retrievals and installations, ensuring that your well's performance is optimized at all times. Tailored for the Offshore Challenge Understanding the unique challenges of offshore operations, our services are tailored to meet the demands of Mobile Offshore Drilling Units (MODUs), Light Intervention Vessels (LIVs), and stationary offshore platforms. Our slickline units are engineered to withstand the harshest marine conditions, delivering reliable performance where it matters most. A Commitment to Excellence InWaTec Combined's Offshore Slickline Unit services are underpinned by our unwavering commitment to excellence. We are not just service providers; we are partners in your quest for operational efficiency and resource maximization. With our slickline services, we promise not just to meet but to exceed the high standards of the oil and gas industry’s offshore sector. In conclusion, InWaTec Combined is not just facilitating well interventions; we are redefining them. Our Offshore Slickline Unit services are a testament to our dedication to excellence and our unrelenting pursuit of technological advancement. Let us take your offshore operations to new depths of success. View Details

2" Globe-Style Gas Metering Valve

The 2” Globe-Style Gas Metering Valve is designed to provide precise regulation of fuel gas flow in industrial and aero-derivative gas turbines. Its globe valve design offers excellent throttling capabilities, allowing fine control over fuel delivery to maintain the optimal fuel-to-air mixture necessary for efficient combustion. This precise control is crucial for achieving stable turbine performance, reducing emissions, and optimizing fuel consumption.

Constructed with robust materials, the valve is built to withstand the high pressures and temperatures commonly encountered in gas turbine applications. Its durable design ensures long service life and reliable operation even under demanding conditions. The valve features foolproof electrical cables and connectors, enhancing installation safety and reducing the risk of connection errors.

The valve’s compact size and right-angle configuration facilitate straightforward integration into existing turbine fuel systems. Compared to previous models, this valve is an upgrade due to its improved electrical interface and enhanced durability, which reduce maintenance needs and increase operational reliability.

By accurately controlling fuel flow, the 2” Globe-Style Gas Metering Valve helps prevent issues such as flame instability and combustion inefficiency, contributing to smoother turbine operation and lower maintenance costs. It is widely used across various turbine models, including aero-derivative and small- to mid-frame industrial turbines, where precise fuel metering is critical for maintaining performance and compliance with environmental standards.

View Details

9 5/8" Mech-1 Single Grip Mechanical Set Packer for 29.3-36 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

MS-201 Multistage Steam Turbine

Elevate Your Operations with the Kessels MS-201 Multistage Steam Turbine: Unmatched Power and Efficiency In the ever-evolving world of the oil and gas industry, precision and performance are paramount. At Kessels Steam Turbines, we're proud to introduce the MS-201 Multistage Steam Turbine, an engineering marvel that redefines excellence in steam turbine technology. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and our MS-201 Multistage Steam Turbine takes them to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency That Sets a New Standard At the heart of the MS-201 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-201 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-201 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-201 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Isolation Packer HP-2 Hydraulic Set 5 1/2" Packer 20-23 PPF

The Ballycatter WC-HP-2 Isolation Packer is a hydraulic-set, single-string tandem packer designed for multiple-zone well completions.

Its primary function is to act as the upper packer in a stacked packer system, working in conjunction with a lower hydraulic retrievable packer to create a sealed isolation zone between them.

This allows for selective treatment, injection, or production within specific well intervals. Additionally, the WC-HP-2 packer can be used to seal off casing holes or perforations, providing an effective solution for low-pressure well applications.

View Details

Premier Production Packer with Striker

The Premier™ Packer with Striker™ interventionless packer setting system is a proven product for interventionless actuation of the Premier packer. It is the new class of “removable” packers designed for wells that demand the sealing performance of a permanent packer and the flexible workover options of a traditional retrievable packer. Because the Premier can be remotely actuated, rig time/cost is reduced and risks associated with standard well intervention setting methods, are minimized. This results in a cost-savings benefit for the operator. The Striker system is a device that generates packer setting force from hydrostatic well pressure. As a secondary or contingent setting method, it can also be set by hydraulic pressure. The Striker modular design is a derivation of the innovative and successful SB- 3H™ hydrostatic/hydraulic retainer production packer. It can be removed on the production string by cutting the mandrel with a chemical or mechanical cutting tool. The Premier system offers unique high-performance and multiple-removal options for high-cost intervention completions. We can source from current stock or direct from the manufacturer. View Details

HP-3 Hydraulic Set High Angle 7" 29-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

6 5/8" HP-5 Hydraulic Set Production Packer 24-32 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

MS-201EC Extraction Condensing Steam Turbine

Elevate Your Energy Solutions with the Kessels MS-201 EC Extraction Condensing Steam Turbine: Efficiency Perfected In the dynamic world of the oil and gas industry, precision, performance, and sustainability are non-negotiable. Kessels Steam Turbines is proud to introduce the MS-201 EC Extraction Condensing Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Extraction Condensing Turbines Extraction condensing turbines are the lifeline of industries requiring a constant pressure steam flow for diverse processes. The MS-201 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a reliable source of constant pressure steam for your operations. Efficiency at Its Pinnacle What distinguishes the MS-201 EC is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-201 EC shines. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-201 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-201 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Pulling Tools for Internal Fishing Necks

Maximize Your Downhole Retrieval Success with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the specialized and high-stakes environment of oil and gas exploration and production, the right tools can make a significant difference in operational efficiency, safety, and cost-effectiveness. Recognizing the industry’s needs, HOCA Oil Tools introduces its line of Internal Fishing Neck Pulling Tools, expertly designed to address the challenges of downhole tool retrieval. Our products stand as a testament to our commitment to innovation, offering precision-engineered solutions to enhance your downhole operations. HOCA’s Internal Fishing Neck Pulling Tools: Precision-Engineered for Optimal Performance Crafted for the safe and efficient retrieval of downhole equipment with internal fishing necks, HOCA Oil Tools' Internal Fishing Neck Pulling Tools are essential for any downhole operation requiring tool retrieval. Engineered with the highest standards of quality and precision, these tools are designed to securely latch onto internal fishing necks, providing a reliable grip for retrieval without causing damage to the wellbore or the tools themselves. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means selecting a partner dedicated to enhancing the efficiency and safety of your downhole operations. Our commitment to quality, innovation, and customer service ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your operational toolkit positions your projects for greater success, offering the reliability and efficiency needed to tackle the complexities of modern downhole activities. With HOCA Oil Tools, you gain more than just a product; you gain a strategic advantage in your downhole operations, backed by our expertise and support. Opt for HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who trust our Internal Fishing Neck Pulling Tools to enhance their operational capabilities. Elevate your downhole operations with HOCA Oil Tools – where technology, precision, and reliability converge to drive your success. View Details

LANAI Remote Operated Vehicle

Lanai ROV - The Ultimate All-In-One Solution for Subsea Operations Everything You Need - Ready to Dive Right In Imagine having all the tools you need at your fingertips, without the hassle of assembling and configuring complex systems. Introducing the Lanai ROV, the epitome of simplicity and efficiency. Designed by ROV operators for operations, the Lanai ROV is here to revolutionize your subsea exploration. Simplicity Meets Capability We understand that time is of the essence in the underwater world. The Lanai ROV comes fully assembled and ready to run straight out of the case, saving you valuable setup time. With a fully integrated console, tether reel, and factory-tested system, you can dive into your work without the need for a laptop. Engineered for Excellence Drawing upon decades of ROV operation experience and leveraging modern manufacturing techniques, we've created a remotely operated vehicle that sets new standards for capability and affordability. The Lanai ROV offers an unparalleled combination of features that will empower your missions. Pack More, Explore More The Lanai ROV's deck space and buoyancy cutouts offer ample room for a variety of payloads, including imaging sonar, scanning sonar, USBL, altimeter, CTD, UT, and Reach Alpha 5F manipulator. You won't need a tooling skid or extra buoyancy, maximizing your operational flexibility. Versatility at Your Fingertips Standard options such as the 125m tether/reel, console, and controller are just the beginning. With the Lanai ROV, you have the freedom to customize your setup with additional choices like the Newton grabber, waterproof transport cases, spare parts/tools, and more. Rest assured with our 2-year warranty - because your peace of mind is our priority. Unlock the Potential of Sonar Exploration With the Lanai ROV, discovering the underwater world has never been more accessible. The Sliding Aluminum Brackets are designed to securely hold a Cerulean Sonar ROVL (USBL), Blue Robotics Ping360 Sonar, DiveNET GPS (LBL), and many other sonars and beacons. Raise and lower the brackets effortlessly with an Allen Key to protect your valuable equipment from potential obstacles. The Power Behind the Performance Unleash the potential of the Lanai ROV with its impressive specifications: • Depth Rating: Dive confidently to 400m, exploring new depths and territories. • Compact and Lightweight: At just 13.0kg in air and dimensions of 559x356x305mm (LWH), the Lanai ROV is highly maneuverable and portable. • Payload Capacity: With a capacity of 2.1kg in freshwater, you can equip your Lanai ROV with a range of essential sensors and tools. • State-of-the-Art Thrusters: Experience precision movements with 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters. • Superior Imaging: Capture the underwater beauty with a 1080 HD IP camera with tilt and four 1,500 Lumen lights for optimal visibility. The Console - Your Command Center Control your exploration effortlessly with the Mini Integrated Console. Boasting a 12in HD monitor (1,200NIT) and fully isolated output with GFCI, it houses an Intel PC with pre-configured software for seamless operations. Unleash the Exploration with Lanai ROV Take charge of your underwater missions with the Lanai ROV. Simplify your operations, maximize your payload options, and explore with confidence. Contact us today to embark on your journey with the Lanai ROV - The Power of Simplicity, Unleashed. View Details

Mobile Gas Troubleshooting

Responsive Mobile Gas Troubleshooting: We're Here to Be Part of the Solution Have you ever experienced the frustration of needing help but struggling to get through to anyone? Or perhaps you've encountered resistance when requesting changes to your work plan due to unexpected circumstances. At Lovat Gas Solutions, we understand that as a service-oriented company, our role is to respond to your evolving needs and be an integral part of the solution, rather than a source of more problems. We are committed to providing responsive mobile gas troubleshooting services that address your challenges and keep your operations running smoothly. When you choose Lovat Gas Solutions, you can expect: 1. Responsiveness: We recognize the importance of timely support. Our team is dedicated to being available and responsive when you need us the most. Whether it's troubleshooting a gas-related issue or making adjustments to your work plan, we are committed to addressing your concerns promptly and efficiently. 2. Collaboration: We believe in working closely with our clients to understand their unique needs and challenges. Our collaborative approach allows us to identify the most effective solutions and provide the support you require. We are here to listen, adapt, and work together to overcome any obstacles that may arise. 3. Problem Solvers: Our team of experts is well-equipped to tackle a wide range of gas-related issues. With our extensive knowledge and experience, we can troubleshoot problems and offer practical solutions that align with your goals. Count on us to be proactive problem solvers who are dedicated to finding the best outcome for your business. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We strive to exceed your expectations by delivering exceptional service and ensuring that we not only meet your immediate needs but also contribute to your long-term success. Your trust and satisfaction are the driving forces behind everything we do. Choose Lovat Gas Solutions as your partner for responsive mobile gas troubleshooting. Experience the difference of working with a company that is committed to being there for you, supporting your needs, and providing effective solutions. Contact us today, and let us be part of the solution to your gas-related challenges. Together, we will overcome obstacles and ensure the smooth operation of your business with Lovat Gas Solutions. View Details

O-rings and Gaskets for various applications including re-dress of downhole equipment

An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, forming a seal at the interface. View Details

Isolation Packer HP-2 Hydraulic Set 7" Packer

Setting Mechanism

The Ballycatter WC-HP-2 Isolation Packer is hydraulically set, meaning it is activated using tubing pressure rather than mechanical manipulation. During deployment, the packer is run into the wellbore as part of a stacked packer system, positioned above another hydraulic retrievable packer.

Once in place, hydraulic pressure is applied through the tubing, which compresses the packing element system, forcing it outward against the casing wall. Simultaneously, the slips engage to anchor the packer in position, ensuring a secure, pressure-tight seal within the isolation zone. The hydraulic setting eliminates the need for tubing rotation, making it particularly effective for deviated wells or conditions where mechanical manipulation is restricted.

Once set, the packer remains mechanically locked in place, independent of trapped hydraulic pressure. This design ensures that differential pressures, wellbore fluid movement, or thermal expansion and contraction do not compromise the seal, maintaining long-term zonal isolation. The packer can be used for treatment, injection, or production operations, providing a stable isolation barrier between zones for efficient fluid control and optimized reservoir management.

Retrieval Mechanism

The WC-HP-2 Isolation Packer is retrieved using a straight-pull shear release system, which allows for efficient and controlled removal without requiring tubing rotation.

When an upward force is applied to the tubing, the shear-release pins disengage, allowing the packing elements to relax and the slips to retract. This mechanical release mechanism ensures that retrieval forces remain unaffected by differential pressure, providing operators with a predictable and reliable method for packer removal.

For added flexibility, the shear-release force can be adjusted before running the packer to accommodate different well conditions.

The compact, debris-resistant design of the packer facilitates smooth retrieval, even in doglegged or deviated wells, reducing the risk of tool sticking.

By providing a simple, efficient release mechanism, the WC-HP-2 minimizes rig time and operational costs, making it a practical and cost-effective solution for multiple-zone completions and casing isolation applications.

View Details

Valve Manifolds 2 Valve Manifold L Type – Pipe to Pipe 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The L type 2 valve manifold is a compact and reliable solution designed for connecting impulse lines to pressure transmitters or gauges in industrial systems. Its primary purpose is to allow safe and efficient measurement of process pressures while providing the ability to isolate, vent, or calibrate instruments without disrupting the process.

The L type configuration refers to the layout of the two valves, arranged in an L shape, which allows for simple and intuitive operation. This design enables the user to block the process pressure, bleed off trapped pressure, and perform calibration on static pressure transmitters or gauges. The arrangement minimizes installation space while ensuring clear and accessible operation.

Pipe to pipe manifolds are designed to connect directly to process lines using standard piping connections. This allows for straightforward integration with impulse lines and reduces the need for additional fittings. The manifold provides a secure and leak-free connection while maintaining easy access for maintenance, calibration, and testing of instruments. Overall, the L type 2 valve manifold combines compact design, operational simplicity, and high reliability for critical measurement applications.

View Details

Wireline Retrievable Surface Controlled Subsurface Safety Valve 5-1/2 inch Bigbore

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog. View Details

Pipe Fittings Hex Reducing Couplings – Female NPT – 1/4", 3/8", 1/2", 3/4", 1" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Hex Reducing Couplings Female NPT are precision pipe fittings designed to connect two pipes of different sizes while maintaining a secure, leak-tight connection. The female NPT threads provide a tapered seal that ensures a tight fit when connected to a male NPT thread, making them suitable for high-pressure systems up to 10,000 PSI. The hex shape of the coupling allows for easy tightening with standard tools, providing both convenience and reliability during installation.

Reducing couplings are specifically used when there is a need to transition between different pipe sizes in a system, allowing for flexibility in design and modification of existing pipelines. They help maintain proper flow rates, pressure, and system integrity without the need for custom fittings. This makes them essential in oil and gas systems where varying pipe sizes are common.

These couplings are manufactured from high-quality materials and are compliant with recognized standards, including ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228, ensuring consistency, traceability, and durability in demanding applications. Hex Reducing Couplings Female NPT are ideal for situations where space is limited and a reliable connection between different pipe sizes is required, supporting both operational safety and system efficiency.

View Details

Check Valve Poppet Type – Tube Ends 3/8" NPT – 6000 PSI – ISO 9001

The Check Valve Poppet Type with 3/8" NPT tube ends is a compact valve designed to allow flow in one direction while preventing reverse flow in hydraulic, pneumatic, and industrial systems. It features a spring-loaded poppet mechanism that opens when forward pressure exceeds the cracking pressure and closes immediately when flow attempts to reverse, ensuring reliable protection for pumps, compressors, and other critical equipment.

Rated for a standard working pressure of 6,000 psi, with optional higher-pressure ratings up to 10,000 psi, this valve is suitable for demanding applications in oil and gas, chemical processing, instrumentation, and general industrial environments. The 3/8" NPT tube ends provide secure, leak-tight connections and easy integration into medium-diameter piping or tubing systems.

The poppet design minimizes pressure drop while delivering fast response and tight sealing, reducing the risk of backflow and system inefficiency. Built from durable materials such as stainless steel, Duplex, Super Duplex, Hastelloy, Inconel, or Monel, the valve offers long service life even in corrosive or high-pressure conditions. Factory testing ensures each valve meets standards for cracking and reseal performance, with heat code traceability for full material verification.

This type of valve is particularly effective in applications requiring precise flow control, compact installation, and reliable one-way operation, making it an essential component for maintaining system integrity and protecting valuable equipment.

View Details

HDI 2250 Valve Position Indicator System

The HDI 2250 Valve Position Indicator System provides a reliable method to monitor the open or closed status of manual and hydraulically operated gate valves on choke manifolds. It offers two modes of position verification: a clear visual indicator mounted directly on the valve, and an electronic signal transmitted remotely to control rooms or monitoring systems. This dual feedback delivers real-time valve position information both locally and from a distance, enhancing operational control and safety.

The system is compatible with a wide range of rising and non-rising stem gate valves from various manufacturers, adding position monitoring without compromising valve integrity or certification. An adapter enables installation on valves that lack built-in position feedback. The sensor is an inductive Namur type housed within a rugged 316 stainless steel case, engineered for hazardous oilfield environments. It operates on a 5 to 25 volts DC power supply, making it suitable for integration with most industrial control systems.

Weighing 15.3 pounds with the junction box mounted, the 2250 is built for durability and long-term performance in demanding onshore and offshore conditions. Once installed, it requires minimal maintenance, reducing operational downtime.

The system connects easily to local displays and remote monitoring platforms, offering a comprehensive view of valve positions across the manifold. It supports both Namur and proximity sensors, providing flexibility to meet different installation requirements.

The 2250 stands out for its ability to retrofit manual valves without modification, its robust construction for harsh environments, and dual visual and electronic position reporting. These features make it a practical, dependable choice for improving safety and operational awareness in oil and gas valve management.

View Details

Wireless Infrastructure Design and Implementation

Redefining Wireless Infrastructure for the Oil & Gas Sector: Nulux Network Solutions Leads the Way In the modern era of the oil and gas industry, the intricate operations and vast terrains involved necessitate a robust, efficient, and secure communication network. As reliance on digital solutions becomes more pronounced, so does the need for seamless wireless infrastructure. With Nulux Network Solutions at the helm of wireless infrastructure design and implementation, the oil and gas sector can now look forward to tailored solutions that guarantee optimum connectivity. Bridging Distances and Overcoming Obstacles Geographical distances, challenging terrains, and myriad obstacles are inherent to the oil and gas industry. In such scenarios, traditional hard-line connections might prove ineffective, expensive, or even impossible. This is where Nulux’s expertise in wireless communication links becomes invaluable. With a proven track record of designing and implementing both point-to-point and multipoint radio networks, along with tower construction, rigging, and mesh networks, Nulux offers unparalleled solutions that ensure constant, uninterrupted connectivity. Harnessing the Power of Wireless Access Points As workplaces in the oil and gas sector become more dynamic, the dependency on mobile devices for tasks such as documentation review, QA-QC, and project planning is intensifying. Recognizing this need, Nulux offers top-tier wireless network designs that ensure every corner of your facility, be it the office or the expansive facility floor, remains connected. This not only boosts productivity but also paves the way for substantial time and cost savings. Point-to-Point Vs. Multipoint: Customized Solutions for Diverse Needs Understanding the distinction between point-to-point and multipoint networks is vital. While the former establishes a dedicated link between two distinct points ensuring utmost security and streamlined communication, the latter connects multiple points through a single shared line, facilitating broad-spectrum connectivity. Key Benefits of Opting for Nulux’s Wireless Infrastructure: Boosted Productivity: Seamless connectivity ensures that all personnel, regardless of their location, have unhindered access to centralized data, thereby accelerating operations. Enhanced Security: The private nature of point-to-point networks shields data from potential interceptions, guaranteeing safe data transfers. Cost-Effective Solutions: Especially in scenarios where traditional hard-line installations are impractical, wireless networks present a more economical and feasible option. In conclusion, the sophisticated nature of operations in the oil and gas industry demands nothing short of excellence in communication infrastructure. With Nulux Network Solutions, engineering professionals can expect wireless infrastructure designs that are not only advanced and reliable but are also tailor-made for the unique challenges of the sector. As the industry evolves and the need for reliable wireless tech surges, Nulux remains steadfast in its commitment to stay ahead, ensuring that the oil and gas sector remains seamlessly connected, always. Connect with us today, and let's build the future of wireless communication together. View Details

Water Injection Safety Valve 4.25 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

MS-52 Multistage Steam Turbine

Elevate Your Energy Solutions with the Kessels MS-52 Multistage Steam Turbine: Unleash Power, Precision, and Performance In the ever-evolving realm of steam turbine technology, Kessels Steam Turbines stands as a beacon of innovation and excellence. For the oil and gas industry, where power and precision are paramount, our MS-52 Multistage Steam Turbine is the ultimate solution – engineered to surpass expectations and redefine industry standards. Dominating Back Pressure Turbines Back pressure turbines, available in both single-stage and multi-stage configurations, serve as the vital link between boiler units and process steam headers. These turbines are the backbone of industries that demand a copious amount of steam, revolutionizing the utilization of steam and electricity generation. The Art of Efficiency At the heart of the MS-52 Multistage Steam Turbine is the hallmark of back pressure turbines: the straight-back pressure design. This engineering marvel ensures the seamless harnessing of exhaust steam, matching process demands with unparalleled precision. Every unit of electrical power generated is consumed as per the process steam demand, making it a pinnacle of efficiency. Applications Without Limits Our MS-52 turbine is not just a machine; it's a versatile workhorse ready to excel in various applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Take a giant leap towards sustainability by utilizing our turbine to generate electricity. It powers generators with clean and efficient steam energy, reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-52 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are the order of the day. Kessels turbines seamlessly blend the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a steady and reliable steam supply that your operations can depend on. The Kessels Advantage Choosing Kessels Steam Turbines is more than a business decision; it's a choice of a partner committed to your success. Our MS-52 Multistage Steam Turbine embodies our unwavering dedication to innovation, performance, and customer satisfaction. Key Benefits of the MS-52 Multistage Steam Turbine: Unparalleled Efficiency: Maximize steam utilization while minimizing waste. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations. Unmatched Versatility: Adapt effortlessly to changing needs, be it for drive applications or sustainable power generation. A Greener Future: Harness steam power for electricity generation, reducing your environmental impact. Dedicated Support: Our team of experts is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Bigbore Wireline Retrievable Surface Controlled Subsurface Safety Valve 4.5 inch

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog. View Details

C-1 Single Grip Invertible Packer

The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. View Details

Warehouse Dolly

Are you tired of searching for the perfect ESP stand for the inspection and maintenance of your electric submersible pumps? Look no further than Sivam! We specialize in providing high-quality ESP stands that are specifically designed to meet the needs of your team. Our ESP stands are built using only the highest quality materials, ensuring exceptional durability and reliability. At Sivam, we understand the importance of precision and accuracy in the maintenance of critical equipment like ESP's, which is why our stands are designed to provide a stable and secure platform for teardown and inspection. We know that convenience and ease of use are important factors when it comes to selecting an ESP stand, which is why we offer adjustable height options to ensure a level working surface. Our stands are also equipped with a range of additional features to help your team work more efficiently, so you can get the job done quickly and effectively. At Sivam, we pride ourselves on providing exceptional customer service. We work closely with our clients to understand their specific needs and design benches that meet their exact specifications. Our commitment to quality and customer satisfaction is unmatched, so you can trust us to deliver the best products and services for your business. Choose Sivam for all your ESP stand needs and take your operations to the next level. Contact us today to learn more about our products and services and see how we can help you get the job done right! View Details

2-1/2 inch Ambient Valve

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

6 5/8" Mech-1 Single Grip Mechanical Set Packer

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Premium All-Function Welding Helmet

Introducing the Canaweld Premium All-Function Welding Helmet Series - Your Ultimate Welding Companion! When it comes to welding, safety is paramount. A high-quality welding helmet is not just a piece of equipment; it's a shield that protects welders from sparks, ultraviolet, and infrared light during the welding process. That's why we've created the Premium All-Function Welding Helmet Series - a state-of-the-art auto-tinting helmet that blends top-notch protection with hands-free ease of use. Experience True Protection - Auto-Tinting Technology: Our Premium All-Function Welding Helmet Series features auto-tinting technology that takes your safety to a whole new level. The photosensitive filter in the helmet automatically adjusts the viewing area to a pre-set shade before the light hits your eyes, offering instant protection. When your weld is complete, the viewing area "un-tints," allowing you to inspect your work without lifting the mask. This innovative design not only protects your eyes but also increases detection time, ensuring you weld with confidence. What Sets Us Apart - Top-Quality Features: When it comes to a high-quality welding helmet, we don't compromise. Here's what makes our Premium All-Function Welding Helmet Series stand out: 1. Lightning Fast Detection: With a detection time (tinting speed) of at least 1/20,000 of a second, your eyes are always shielded promptly. 2. Enhanced Protection: Equipped with four photo-sensitive sensors, our helmet guarantees maximum efficiency and exceptional protection. 3. Versatile Shade Settings: The helmet offers multiple shade settings, allowing you to use it for all welding processes in various light conditions. 4. Wide Viewing Area: The large viewing area ensures ease of use even in confined spaces, giving you an unobstructed view of your work. 5. Featherweight Design: We've crafted our helmet with a lightweight design to reduce neck fatigue during prolonged use, keeping you comfortable and focused. 6. Reliable Power: The solar cell, combined with two replaceable CR2032 lithium batteries, ensures your helmet never runs out of juice. Our Premium All-Function Welding Helmet Series goes above and beyond to deliver top-tier features: • Infinitely adjustable sensitivity control for personalized protection. • Constant UV/IR protection with Shade DIN16 at all times. • External dark to light delay adjustment from 0.1 to 1.0 seconds. • Low amperage TIG welding compatibility for added versatility. • Grinding function and low volume alarm for added convenience. • Superior optical clarity for crystal-clear vision during welding. • ADF self-check ensures the helmet's integrity before use. Built to Last - Certified Excellence: At Canaweld, we take quality seriously. Our Premium All-Function Welding Helmet Series complies with CAN/CSA Z94.3 – 07 (R2014) standards, ensuring you get a product that meets the highest safety and performance requirements. Elevate Your Welding Experience - Choose Canaweld's Premium All-Function Welding Helmet Series! View Details

4 1/16" Coiled Tubing Hanger for 10,000 PSI

The 4 1/16” 10M Coiled Tubing Hanger is engineered to provide reliable mechanical support and pressure containment for coiled tubing strings used in demanding oil and gas well intervention operations. Specifically designed to accommodate coiled tubing sizes up to 3 1/2” outer diameter, this hanger is rated for high-pressure applications up to 10,000 psi (10M), making it suitable for wells with challenging downhole conditions and high-pressure requirements.

Constructed with robust materials and precision-engineered to meet API 6B and 6BX standards, the hanger ensures secure connection to wellhead equipment through flanged interfaces, enabling seamless integration into existing well infrastructure. The design incorporates a wireline entry sub that guides wireline tools into the tubing bore and provides a secondary annulus seal. This feature not only facilitates the safe deployment of wireline tools but also restricts any upward movement of the coiled tubing, maintaining tubing position and well control during operations.

This coiled tubing hanger supports a range of intervention tasks, including well cleanouts, stimulations, logging, and workover activities, by securely suspending the tubing and maintaining pressure integrity at the wellhead. The ability to reliably seal the annulus while supporting heavy-duty tool strings helps reduce operational risks, prevents fluid leaks, and minimizes well downtime. Its capacity to handle larger tubing sizes and high pressures makes the 4 1/16” 10M hanger especially valuable in complex wells where robust mechanical support and dependable sealing are critical for safe and efficient well intervention.

View Details

Stud Welder CAD 81

Introducing the Canaweld CAD 81 Capacitor Discharge Stud Welding System: Power and Precision Unleashed! When it comes to high-performance stud welding, the Canaweld CAD 81 stands in a league of its own. Harnessing the cutting-edge technology of Capacitor Discharge (CD) stud welding, this welding system offers unparalleled precision, speed, and efficiency, making it the ultimate choice for welders in the oil and gas industry. Precision in a Blink - Capacitor Discharge Stud Welding The Canaweld CAD 81 utilizes a direct-current arc from a capacitor, allowing for weld times as quick as 1 to 6 milliseconds. The result? Seamlessly welded studs with no burn-through on the opposite side, even with very thin metals. Perfect for smaller diameter studs, pins, non-standard materials, and when precision is paramount. Compact Yet Powerful - Unmatched Welding Capacity Don't be fooled by its compact design; the Canaweld CAD 81 boasts a full 5/16-inch (M8) welding capacity, making it the most compact and versatile system on the market. Its microprocessor control ensures precise and consistent welding performance, while the enhanced charging circuit with a high output transformer maximizes its duty cycle, offering you unmatched welding power in a lightweight package. Safety and Ease of Use - User-Friendly and Efficient The Canaweld CAD 81 is designed with your safety and convenience in mind. With enhanced user feedback, including safety and fault codes, you can weld with confidence and peace of mind. The system comes complete with everything you need, including the gun, two ground cables, collets, changing tools, and a convenient carrying case for easy transportation. Features That Make a Difference Let's take a look at some of the remarkable features of the Canaweld CAD 81: • Weld Range: Accommodates US Stud Size #4 – 5/16”, Metric Stud Size (M3-M8), Stud diameter 0.112″ – 0.312″ • Input Power 1~115/230, 50/60Hz (internally switchable) • 81,000uf Capacitance for rapid and powerful welds • Portable and Lightweight: Weighing only 25 lbs., take it anywhere the job demands • Ergonomic Design: Designed for comfort and ease of use during extended welding sessions • Heavy-Duty Cable Set: Ensures robust and reliable connections • Dual Ground Cable: For added safety and efficiency • Fully Adjustable Leg Set: Achieve the perfect welding angle for every job • Diagnostic LEDs: Easy troubleshooting and maintenance The Canaweld CAD 81 - Empowering Welders in the Oil and Gas Industry At Canaweld, we take pride in providing cutting-edge welding machines and accessories that meet the unique demands of the oil and gas industry. The CAD 81 exemplifies our commitment to excellence, innovation, and your welding success. Unleash the Power of Precision and Performance with the Canaweld CAD 81 Capacitor Discharge Stud Welding System. Empower your welding journey with Canaweld - Your Partner in Welding Excellence! View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type